Wood Stains & Sealers Q&A

Question 1

I was wondering if you could ask AFM about whether Safeseal on plywood sheathing would stop water vapor from being able to pass from the inside of the house to the outside. I'm wondering if I am going to cause walls not to be able to dry to the outside because of this product. In a nutshell, does Safeseal affect the permeability of the plywood to allow water vapor to pass through? <BR>I'm reasoning if it stops off gassing of formaldehyde (gas) that it will also stop water vapor (gas) also. Is my reasoning faulty? View answer

Asked 9 ´years ago

Question 2

How long is it until you can put furniture on the waxed floor? (This will not be the floor's first coat of wax, so it will be a thin layer and buffing with an electric buffer, if it makes a difference) View answer

Asked 5 ´years ago

Question 3

Hello, I have 1 gallon of the SafeCoat Polyureseal in matte and 1 gallon in satin. I will likely need to use 2 gallons for my project, 1 initial coat and then a second on top. Is it possible to mix the two gallons together and then proceed with my project, or should I use the matte first and then follow it up with the satin? View answer

Asked 4 ´years ago

Question 4

Can this product be used on click-and-lock cork flooring? View answer

Asked 3 ´months ago | AFM SafeCoat, Polyureseal BP

Question 5

Can this be used to coat animal enclosures? I have some large reptiles that need to have their tanks recoated but my old product is no longer in production. View answer

Asked 4 ´years ago

Question 6

I installed some wood flooring about 1.5 years ago in a rental. Used low-grade plywood that I cut into planks and installed for a rustic look. The tenants have been complaining about urethane smell - and I started looking for a solution and found you guys. However, after more thinking/research I don't think it's the oil-based urethane that's the problem but possible off gassing of formaldehyde. I already have oil-based polyurethane on the floors - so I'm not sure which product you think might work best to seal over what's there and help protect against more off gassing. View answer

Asked 10 ´years ago

Question 7

Will this work and seal the grout in on my river rock shower floor? View answer

Asked 6 ´years ago

Question 8

Can I use this on top of hardwood floors that were coated with a water based poly (2 years ago)? View answer

Asked 6 ´years ago

Question 9

Hi I have a floor that was stained with Rubio chocolate color. What color of universal maintenance oil should I purchase? View answer

Asked 6 ´years ago

Question 10

What odor blocking sealer can I use to get rid of the smell and chemical fumes on painted iron? View answer

Asked 6 ´years ago

Question 11

Hi- I want to use one coat of your Oil Wax followed by two coats of Vermont Natural PolyWhey Floor Finish on our sanded floors. How long would you recommend letting the Oil Wax dry before applying the PolyWhey? I did a test with about 24 hours drying and it seems good, but wanted to get your input. Thanks! View answer

Asked 5 ´years ago

Question 12

I've gotten interested in color washing walls. Every "recipe" I've seen so far has used latex glaze that has high vocs. Will this work as a substitute, mixed with an acrylic paint and water to color wash over an existing acrylic layer? I am looking at using Behr premium plus paint which is acrylic. View answer

Asked 5 ´years ago

Question 13

Is it safe to apply over chalk painted cabinets? View answer

Asked 6 ´years ago

Question 14

Can this be used on (indoor) teak veneer furniture? View answer

Asked 3 ´years ago

Question 15

Would this be a good product to do initial oiling and conditioning of a RAW maple butcher block countertop that we will be cutting and eating from? View answer

Asked 6 ´years ago

Question 16

I'm looking for an opinion to make a brown paper bag floor waterproof. Would this product be a good option? View answer

Asked 5 ´years ago

Question 17

Am I able to paint over top of this coat with water based white paint? How many coats of this do I need to apply? View answer

Asked 2 ´years ago

Question 18

Can I use this on non waterproof Laminate flooring? View answer

Asked 5 ´years ago

Question 19

Can i use this over a tung oil finish? View answer

Asked 6 ´years ago

Question 20

What is the percentage of carnauba and beeswax? View answer

Asked 6 ´years ago

Question 21

Can I use this under and over wood projects with Vinyl designs made from a Cricut machine? View answer

Asked 4 ´years ago

Question 22

Does this repel mold and mildew? View answer

Asked 6 ´years ago

Question 23

Hi! I am Remodeling our tiled bathroom and I have already finished priming and painting all of the tile and I'm looking for an all natural water-based polyurethane (or whatever you can recommend) to clear coat the tile?Thank you! View answer

Asked 5 ´years ago

Question 24

I've applied an oil based poly to my wood floors. it's humid in my locale and I've had an issue with moisture in the subfloor during the summer. I was told I need to apply a breathable finish (after I take up the oil poly) and that water based poly is more permeable. Is the Monocoat breathable? Is it more vapor permeable than water based poly? View answer

Asked 3 ´years ago

Question 25

Can you tell me what all of the ingredients are in the Marmoleum floor finish are please?! View answer

Asked 1 ´year ago

Question 26

What is the difference between this product and the Vermeister zero-VOC polyurethane product? I need a clear matte finish for old hardwood floors that I am refinishing. They have already been sanded and I am keeping the bare color and need a sealant. View answer

Asked 6 ´years ago

Question 27

Can you paint over this seal? View answer

Asked 6 ´years ago

Question 28

Is this material flexible and can it be applied to fabric? View answer

Asked 6 ´years ago

Question 29

Hello , do you have anything to seal wood stain (non toxic )? View answer

Asked 4 ´years ago

Question 30

May I use this to seal vinyl faux plank wood flooring? Does it waterproof floors? View answer

Asked 4 ´years ago

Question 31

What sealant is best for melamine particle board? I had new cabinets installed and can't tolerate the off gassing from them. View answer

Asked 5 ´years ago

Question 32

Can it be used on acrylic shower walls? View answer

Asked 5 ´years ago

Question 33

can i mix colors? View answer

Asked 6 ´years ago

Question 34

Can i use this on unsealed concrete floors that have been painted with chalk paint? View answer

Asked 6 ´years ago

Question 35

I am looking to seal and prevent dusting to my adobe brick walls. Will this seal and prevent dusting? Thanks View answer

Asked 6 ´years ago

Question 36

Can the 2 cans be resealed? View answer

Asked 1 ´year ago

Question 37

Will this product have any effect on copper, pvc, or galvanized piping? View answer

Asked 4 ´years ago

Question 38

We stained an old pine log bed 2 weeks ago. We brought it in our bedroom and put it together today. The fumes are still so strong I cannot sleep and feel ill. Will this product eliminate the strong odor? View answer

Asked 1 ´year ago

Question 39

Can this be used to seal dishes, and is it food safe? View answer

Asked 5 ´years ago

Question 40

Is this product good for wood garden furniture? View answer

Asked 6 ´years ago

Question 41

Will this work on a concrete floor painted with an enamel paint? The rep said the clear would have to be breathable. Thanks! View answer

Asked 6 ´years ago

Question 42

I have gutted an area of my house (kitchen and one bedroom) that has some chemical off gassing and possible moisture issues. At this point, it is down to studs and a concrete slab floor. Some of the wooden framework is made with pressure-treated wood. My plan is to coat all of the studs with SafeSeal Hardcoat. But before I do, I was wondering if you have another recommendation. View answer

Asked 7 ´years ago

Question 43

Hi. I read one of these answers wrong I think. I'm working on a butcher block countertop. I was planning on using this product. I already have now. But now I've decided I need to stain the countertop. Is it possible to use Rubio Monocoat 2C Oil stain on the wood and apply this on top for extra protection? TIA for your help. View answer

Asked 4 ´years ago

Question 44

What is the maximum temperature of application? View answer

Asked 5 ´years ago

Question 45

we have a 75 year old red wood picnic table that needs to be sanded and brought back to life. Does it need a special finish ? View answer

Asked 6 ´years ago

Question 46

I have T111 in my basement and want to seal it? Do any of your products prevent the off gassing from T111 and pressure treated 2 x 4s? View answer

Asked 5 ´years ago

Question 47

What wood water sealant or plastic can I use in a vegetable garden bed? View answer

Asked 6 ´years ago

Question 48

Are there brand/models of paint sprayers that you would recommend in applying AFM Safecoat SafeSeal and HardSeal? Thanks View answer

Asked 4 ´years ago

Question 49

Safeseal hard seal on chinese furniture made with waterproof particle board? View answer

Asked 3 ´years ago

Question 50

Hi. Ok to use on wood kitchen countertops that are sealed with hard oil 9 first? View answer

Asked 2 ´years ago

Wood Stains & Sealers Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic