Wood Stains & Sealers Q&A

Question 1

Asked 6 ´years ago

Question 2

Is it safe to use on decorations inside a fish tank? View answer

Asked 5 ´years ago

Question 3

I have white glossy cabinets that remain smelly with a �??new paint' smell on the inside years later (only the cabinets that have interior shelves that were painted). I am unsure if the paint is oil based, but am hoping you can recommend what product I try to seal the inside of the cabinets? Thanks! View answer

Asked 5 ´years ago

Question 4

What moisture level do you recommend the wood be at prior to staining? View answer

Asked 1 ´year ago

Question 5

Hi. We are rebuilding our deck and are using redwood posts (4X4 from Home Depot) that we would like to keep looking as natural as possible while at the same time protecting them from rain, sun and wind. What different products should we use? We love the look of natural redwood and would like to keep it like that as much as possible. How often should we reapply these products? We live in a desert kind of climate (hot summers, cold winters, pretty dry). We are also not crazy about toxic products. View answer

Asked 5 ´years ago

Question 6

Can you put this over stained wood surfaces? View answer

Asked 6 ´years ago

Question 7

Would this be appropriate to use to seal a cement candle vessel? Is it heat resistant? View answer

Asked 5 ´years ago

Question 8

What would you use to seal up the toxic smell of a petroleum based caulk? I tried 7 coats of Acrylacq which diminished it somewhat, but the toxic smell is still there. Would Hardseal or Polyureseal BP be a better choice? View answer

Asked 5 ´years ago

Question 9

Can this be used on prefinished engineered hardwood flooring? View answer

Asked 5 ´years ago

Question 10

Does it flake off over time? View answer

Asked 5 ´years ago

Question 11

I have put up paintable wallpaper in my kitchen. I painted it with a pearl metallic water based paint and didn't notice the cancer warning. Now I am wondering if I get your AFM Safecoat Polyureseal BP could I brush or roll a coat of this on to seal off the other paint and be able to wipe down any splatters with only 1 coat? I am worried that sanding would be difficult or impossible with the textured wall paper design to do more coats. View answer

Asked 6 ´years ago

Question 12

Can it be used for bedroom furniture? Looking for something to Seal wood that is eco-friendly and odor free. Will apply on three-quarter inch maple veneer plywood. View answer

Asked 6 ´years ago

Question 13

I'm thinking of getting an Ikea wardrobe cabinet (Pax), but the sides of the shelves are exposed particle board. The inside of the sidewalls have peg holes for the adjustable shelves. These holes (approx. 1/4" round and deep) are also exposed particle board. Which AFM product would be best to use to seal these? In addition, if I decide to seal the whole cabinet (the Ikea description says it is made of fibreboard and paper foil) which AFM product would I use? Are AFM sealer products completely inert when dry? (i.e. absolutely no smell) View answer

Asked 2 ´years ago

Question 14

Are there brand/models of paint sprayers that you would recommend in applying AFM Safecoat SafeSeal and HardSeal? Thanks View answer

Asked 4 ´years ago

Question 15

Is Safecoat Hard Seal the correct product to seal VOC for an white painted bedroom set? Im looking to the Hampton Storage Bed Super Set from Pottery Barn Teen. Also would this dry properly for the top of a white desk from Pottery Barn? View answer

Asked 4 ´years ago

Question 16

What can I put on top of a paint can or a polyurethane open can o when I get to close till the next use so the skin n doesn't form over the top of the paint or s polyurethane can u help me please????? View answer

Asked 5 ´years ago

Question 17

How much Rubio Monocoat is needed to stain a dresser that is approximately 5ft tall x 3-1/2 feet wide? View answer

Asked 2 ´years ago

Question 18

Can you use this over a laminate floor to seal it ? View answer

Asked 5 ´years ago

Question 19

I understand that this is for exterior use and not intended for shower use, but is this product safe enough to be used on cedar planks in a shower stall in a home? View answer

Asked 5 ´years ago

Question 20

Can you use it on exterior wood doors? View answer

Asked 5 ´years ago

Question 21

How long is the finish expected to last? In other words, how often should I expect to need to re-apply? View answer

Asked 1 ´year ago

Question 22

Will this keep outdoor furniture feet dry? Should I put it on the bottom of the feet? Can you reply by tomorrow, 6/6, 5PM? Thanks! View answer

Asked 2 ´years ago

Question 23

Can this be used on the exterior surface of a shed to protect against sprinkler damage? View answer

Asked 5 ´years ago

Question 24

Can Bioshield Hard Oil be used on USFloors oil finished products? View answer

Asked 5 ´years ago

Question 25

Says it's nontoxic. Does that mean I can use it on cutting boards? View answer

Asked 3 ´years ago

Question 26

Can the polyureseal BP be used on a vintage cabinet that has been stained and sealed? We don't know if the stain/seal was oil based or not. View answer

Asked 3 ´years ago

Question 27

Anyone ever used it on terracotta? View answer

Asked 7 ´years ago

Question 28

I'm looking for a product that will offer some protection for an outdoor teak table and chairs from the elements but will also allow the teak to gray naturally. Is this the right product? View answer

Asked 5 ´years ago

Question 29

I have some worn wood flooring in my condo that I want to refinish in a safe way. I was wondering which products you recommend would be the simplest and safest to use. I was looking at the BioShield Hard Oil and AFM Naturals Clear Penetrating Oil because it says they are food grade, so I thought they would be good for flooring if you expect to be walking barefoot. However, I am not sure if they require long drying times and mechanical burnishing or sanding. Is here anything that can be applied that does not require burnishing? I would like to try to do the job myself. View answer

Asked 7 ´years ago

Question 30

I am building an outdoor cedar table for kids and would like to use a sealant and a stain that is non-toxic. Can I use Bioshield Aqua Resin Stain followed by AFM SafeCoat, Naturals Clear Penetrating Oil? View answer

Asked 5 ´years ago

Question 31

I applied one coat on a refinished wooden table and read that the wood can be sanded. As I am a novice, I am not sure if I sand and reapply, do I need to or would it be best to re-sand the final product. What is used for a final buffing? View answer

Asked 6 ´years ago

Question 32

Can this be used on porcelain kitchen sinks? View answer

Asked 6 ´years ago

Question 33

Hi. Can I use this product on finished hardwood floor to seal small holes or maybe You have something else for that? View answer

Asked 6 ´years ago

Question 34

Would this be appropriate for old wood floors? I have a health food store with old wood floors that are getting a little rough and want something to help extend their life without subjecting my customers and employees to unhealthy products. Thank you. View answer

Asked 5 ´years ago

Question 35

What are the ingredients? View answer

Asked 5 ´years ago

Question 36

Can I use on previously varnished wood that I'm wanting to use for a new bathroom project? View answer

Asked 6 ´years ago

Question 37

Can I apply this to new cedar wood to help maintain the cedars beautiful natural color? Is this like a clear coat? View answer

Asked 6 ´years ago

Question 38

Would this, or any other product, work to seal in VOCs in a vehicle that has a "new car smell"? Someone took my car to get detailed and the seats stained as a gift, and it smells extremely strongly of harmful chemicals. Would using a sealer product on the seats/dash/console help, or is that not advised? View answer

Asked 2 ´years ago

Question 39

I may have overlooked it but how big (oz) &/or how much coverage are the sample sizes? Looking to use for a small project. View answer

Asked 6 ´years ago

Question 40

Is there a good wax for use over finish for protection ? View answer

Asked 5 ´years ago

Question 41

Could this be used safely on a kitchen table? View answer

Asked 4 ´years ago

Question 42

Can you use this product over a wood sign that has been previously stained? View answer

Asked 5 ´years ago

Question 43

I painted my oak dining room chairs with 2 coats of RUST-OLEUM Milk Paint in black. Would this be suitable for sealing them? View answer

Asked 5 ´years ago

Question 44

Can I combine AFM Polyureseal BP with AFM Safecoat Durostain Pro for one combined application use to spray on unfinished wooden cabinet shelves? What ratio is recommended? View answer

Asked 1 ´year ago

Question 45

Best long term treatment for outdoor teak chairs and table? View answer

Asked 2 ´years ago

Question 46

Can this product be used on a 30 year old deck that has been stripped and sanded? View answer

Asked 5 ´years ago

Question 47

Does this dry with any kind of sheen? Satin/gloss? View answer

Asked 6 ´years ago

Question 48

I have outdoor redwood stairs with a small platform that is 2 years old and untreated. What do you suggest to protect and preserve? It is about 60 square feet of surface. What would you suggest? I don't want any color but protection and longevity as it is stunning wood. View answer

Asked 5 ´years ago

Question 49

What is the cure time for this product? View answer

Asked 6 ´years ago

Question 50

Need to cover rough sawed lumber. Have a covered front porch with 6x6 post. 4x6 trusses. Ceiling is store bought shiplap. Popular wood. Is this as good as tung oil? View answer

Asked 5 ´years ago

Wood Stains & Sealers Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic