About This Q&A
Ask a question and receive knowledgeable answers from topic experts
I was wondering if you could ask AFM about whether Safeseal on plywood sheathing would stop water vapor from being able to pass from the inside of the house to the outside. I'm wondering if I am going to cause walls not to be able to dry to the outside because of this product. In a nutshell, does Safeseal affect the permeability of the plywood to allow water vapor to pass through? <BR>I'm reasoning if it stops off gassing of formaldehyde (gas) that it will also stop water vapor (gas) also. Is my reasoning faulty? View answer
Asked 9 ´years ago
Asked 16 ´days ago | AFM SafeCoat, Ecolacq, 1-Gallon
Can this be installed over existing hardwood floor? View answer
Asked 3 ´years ago
Can I order a transition piece for this option? View answer
Asked 4 ´years ago
Do you sell flooring transitions to connect between rooms? View answer
Asked 9 ´months ago
Asked 4 ´years ago
Hello, I have 1 gallon of the SafeCoat Polyureseal in matte and 1 gallon in satin. I will likely need to use 2 gallons for my project, 1 initial coat and then a second on top. Is it possible to mix the two gallons together and then proceed with my project, or should I use the matte first and then follow it up with the satin? View answer
Asked 4 ´years ago
Hi, what are the whitest colors of this paint? View answer
Asked 1 ´year ago
Hi, when this gets wet does it get slippery? View answer
Asked 1 ´year ago
Does this primer & paint cover wood knots ? View answer
Asked 4 ´years ago
I would like a mop, do you carry it? View answer
Asked 4 ´years ago
I installed some wood flooring about 1.5 years ago in a rental. Used low-grade plywood that I cut into planks and installed for a rustic look. The tenants have been complaining about urethane smell - and I started looking for a solution and found you guys. However, after more thinking/research I don't think it's the oil-based urethane that's the problem but possible off gassing of formaldehyde. I already have oil-based polyurethane on the floors - so I'm not sure which product you think might work best to seal over what's there and help protect against more off gassing. View answer
Asked 10 ´years ago
Will this work and seal the grout in on my river rock shower floor? View answer
Asked 6 ´years ago
is Bona safe for Tung Oil floor finishes? View answer
Asked 1 ´year ago
I have several questions about Marmoleum Click Flooring: 1. Which size is easier to install: 12x36 or 12x12? 2. What chemicals are used in the floor finish? 3. Does this flooring initially have any chemical odor? 4. What vapor barrier do you recommend for a cement floor (2nd-floor condo)? Do I need padding? 5. Is it possible to use wool pad under Marmoleum Click? 6. How much does installation cost per sq. ft? View answer
Asked 7 ´years ago
What is the thickness of the tile? View answer
Asked 1 ´month ago | Cork Wall Tile - Dekwall
What is the backing made of? View answer
Asked 3 ´years ago
Do you have a thickness more than 1" or panels wider? View answer
Asked 2 ´years ago
What is the length of this flooring sheet? View answer
Asked 1 ´month ago | Forbo Marmoleum Composition Sheet (MCS)
Can you paint wicker furniture with this paint? View answer
Asked 4 ´days ago
Can you Install over ceramic tile? View answer
Asked 9 ´months ago
Will GBS Penetrating Concrete Sealer work for polished concrete? Do you carry any caulk, sand, or silica substance that can be used to fill cracks in the concrete prior to applying GBS Penetrating Concrete Sealer?The concrete in the basement was recently ground to "salt and pepper" look and caulking from radon mitigation was removed with it. The radon levels went up from what they were before. There are various hairline cracks that I planned to grind clean and fill prior to applying the sealer. View answer
Asked 3 ´years ago
What is the percentage of carnauba and beeswax? View answer
Asked 6 ´years ago
