Wood Stains & Sealers Q&A
Activity timeframe
What wood filler should I use with this topcoat? View answer
Asked 4 ´years ago
Is this product good for chicken coops? View answer
Asked 6 ´years ago
Can this be used on wallpaper in a bathroom? View answer
Asked 6 ´years ago
We used Mixwax Fast-Drying Polyurethane Satin on raw cherry hardwood flooring in one room. We've done 3 layers already. The off-gassing has been horrible! We plan to use another product in the remaining rooms. Would you recommend using this product. AFM SafeCoat, Polyureseal BP, as a 4th layer to seal it in order to prevent more off-gassing? Would 1 layer be enough? View answer
Asked 4 ´years ago
Could this be used on a car? View answer
Asked 6 ´years ago
Can you use the mono coat over a gel stain? View answer
Asked 4 ´years ago
I see that to get the best natural wood look, I should use gloss for first coat and then the satin. I have your Safecoat Hardseal product in gloss. Would this be ok to use with the acrylaq? Do I even need the acrylaq or should I order the Safecoat Hardseal in satin? It's for a kitchen table. View answer
Asked 4 ´years ago
Can you paint over this product? View answer
Asked 5 ´years ago
Hi- I want to use one coat of your Oil Wax followed by two coats of Vermont Natural PolyWhey Floor Finish on our sanded floors. How long would you recommend letting the Oil Wax dry before applying the PolyWhey? I did a test with about 24 hours drying and it seems good, but wanted to get your input. Thanks! View answer
Asked 5 ´years ago
Q1: We want to use the VNC Penetrating stain for our fence. We have way too much fence to try and sand. Is pressure washing with a 3400 psi washer and the 30 degree tip as effective as sanding to clean the wood and open it up to receive the penetrating stain?Q2: Based on what I have seen on our deck which was previously improperly stained. It looks like the pressure washer would be as effective if not more effective than sanding to remove the old stain, Would you agree? View answer
Asked 4 ´years ago
Can deck revive be used on railings and spindles? View answer
Asked 6 ´years ago
Will this change the color on new wood? View answer
Asked 5 ´years ago
Could you compare BioShield Herbal Oil and AFM Safecoat Naturals Clear Penetrating Oil - why might I prefer one over the other? And does one of them "amber" the wood more than the other? I'm considering something for a new butcher block countertop which will have food on it - but I would like to tone down the appearance if possible. View answer
Asked 1 ´year ago
Can I apply this on the stovetop cutting board I made ? View answer
Asked 6 ´years ago
I am looking to seal an area around a HVAC vent where asbestos (possibly) tiles have cracked. The tiles have been covered with plywood and laminate flooring, but since the cracked tiles are around the floor vent opening, I want to seal the edges. Will this product work for that? View answer
Asked 5 ´years ago
You have any pictures of the cotton white on pine? View answer
Asked 5 ´years ago
I have red oak floors that have had danish oil and paste wax on them many years ago. Do I need to get every bit of the old oil and wax off before I use this. I really don't want to sand but don't mind stripping the wax. If I need to sand do I need to get down to raw wood? View answer
Asked 5 ´years ago
Is this product safe for sealing reptile enclosures? View answer
Asked 5 ´years ago
I bought a piece of wood furniture, used, that has a perfume smell (most likely from being polished with a scented wood polish and probably petroleum distillates in it). I can smell the perfume scent when I am near the furniture. I cannot just wash it off/out as it has penetrated the wood. What is the best product to use to coat the entire piece, inside and out (it's a hutch/cabinet piece) so that the perfume odor is blocked/encapsulated and no longer releasing into my home's air? Thank you! View answer
Asked 6 ´years ago
