Wood Stains & Sealers Q&A

Question 1

I need a non Toxic sealer for a squirrel feeder. What would be the best product in case of some chewing? View answer

Asked 3 ´years ago

Question 2

This product says for unsealed wood.� My sauna redwood is already stained and sealed. Do you know what product I can get that will stick to oil based polyurethane with zero off-gassing in a sauna designed for the walls to get up to 200 degrees fahrenheit? View answer

Asked 4 ´months ago

Question 3

Do you have a smooth product to use on railings and vert spindles? View answer

Asked 6 ´years ago

Question 4

Would this be a good option to use on an outdoor wood table intended for eating? How long will the stain last with VA weather conditions? View answer

Asked 1 ´year ago

Question 5

How long does it last in the can once it�s been opened? View answer

Asked 3 ´years ago

Question 6

I wanted a white oak natural color. My boyfriend was recommended by the paint shop that Rubio Monocoat Pure is the one. However it ruined the bookcase by making it dark when I wanted white wash natural white oak. How can I fix it and get a white oak color back? View answer

Asked 4 ´years ago

Question 7

Can different sheens Acrylacq be mixed together? I cannot tell a lot of difference between the gloss and satin View answer

Asked 4 ´years ago

Question 8

I have bamboo coasters that are already finished and I've painted with acrylic. will the afm acriglaze work over the other finish and acrylic? View answer

Asked 5 ´years ago

Question 9

Is this food grade safe? I want to use it on a trellis I'm building for my cucumbers and beans to grow on. View answer

Asked 5 ´years ago

Question 10

I have red oak floors that have had danish oil and paste wax on them many years ago. Do I need to get every bit of the old oil and wax off before I use this. I really don't want to sand but don't mind stripping the wax. If I need to sand do I need to get down to raw wood? View answer

Asked 4 ´years ago

Question 11

Is this product safe for sealing reptile enclosures? View answer

Asked 4 ´years ago

Question 12

Would 100-year old oak floors that have just been professionally sanded be considered weathered or relatively non-porous? I'm trying to figure out how much it will cost for 500-600 sq. feet assuming 2 coats will be sufficient View answer

Asked 4 ´years ago

Question 13

I had built in cabinets installed and painted with a white oil base paint. It has been three weeks now, and the smell is so bad. Will your product work on this type of painted surface (wood) and if so, which product do you recommend? View answer

Asked 5 ´years ago

Question 14

Our new bathroom vanity is made from acacia butcher block. The counter service will be exposed to water so I would like to use a product that will seal and protect the surface, as well as not have to reapply constantly. What product(s) would you recommend? View answer

Asked 6 ´years ago

Question 15

Do you need to sand between coats? View answer

Asked 5 ´years ago

Question 16

Would this product be the same as polyurethane sealer without all the chemicals? View answer

Asked 5 ´years ago

Question 17

Can I use this product on wood that has been stained with Rubio Monocoat Oil Plus 2C? View answer

Asked 5 ´years ago

Question 18

Is this the Best Safecoat Product to seal an Indoor Concrete Floor Slab to protect against Moisture Intrusion via the Concrete Floor Slab before applying a Vinyl sheet & then installing new Cork Floor Panels? Or is there a better Safecoat Product for protecting Moisture Intrusion underneath a Vinyl Liner beneath new Cork Flooring Tiles that will be installed 'Floating' & NOT Glued. View answer

Asked 1 ´year ago

Question 19

I bought a piece of wood furniture, used, that has a perfume smell (most likely from being polished with a scented wood polish and probably petroleum distillates in it). I can smell the perfume scent when I am near the furniture. I cannot just wash it off/out as it has penetrated the wood. What is the best product to use to coat the entire piece, inside and out (it's a hutch/cabinet piece) so that the perfume odor is blocked/encapsulated and no longer releasing into my home's air? Thank you! View answer

Asked 5 ´years ago

Question 20

I am looking to protect an exposed cedar deck. Will Rubio Monocoat be easier than Vermont Natural Coatings PolyWhey to re-coat in 2 years or are they the same in that respect? I do not want a coating that will peel or need to be scraped to re-coat. Thanks. View answer

Asked 5 ´years ago

Question 21

I have applied this product to flooring in my home. I would like a bit more shine and protection. It there a poly type product I can apply over the top of this? View answer

Asked 7 ´months ago

Question 22

Can this product be used over a painted surface to water seal it, or is it just for unpainted wood? View answer

Asked 5 ´years ago

Question 23

Would this be a good choice for finishing a wood front door? View answer

Asked 5 ´years ago

Question 24

Could I paint over the stain once it's dried? View answer

Asked 5 ´years ago

Question 25

I am installing a cedar wall in the shower. What would be the best product to protect/waterproof the wood and keep it from graying? Looking to seal not stain. View answer

Asked 6 ´years ago

Question 26

Can I use it on my kitchen floor? It was there when I moved in and I'm not sure if it's vinyl or linoleum. Linoleum is listed in your description but not vinyl. If it's vinyl will the product still work? View answer

Asked 6 ´years ago

Question 27

I'm going to stain a homemade baby crib. Is this safe to use on it? In case he chews on it. View answer

Asked 5 ´years ago

Question 28

I applied these products three years ago. Now there are a few boards I need to replace. What is the process to apply to the same surface again three years later? View answer

Asked 4 ´years ago

Question 29

I added several green treated decking boards this summer. how long should I wait to apply the Deck Revive product? View answer

Asked 2 ´years ago

Question 30

I have american clay plastered on my walls. Would this work to preserve it from touch, etc? Thanks View answer

Asked 5 ´years ago

Question 31

Into non-toxics & meant to safecoat new cedar deck (1000 sft) but contractor has sanded it to 180 grit. What are my options? View answer

Asked 1 ´year ago

Question 32

I recently oiled my Eucalyptus patio furniture with Teak oil. Would this product be recommended to now be applied to the furniture? View answer

Asked 4 ´years ago

Question 33

We have Ipe decking at our new house. Which green product would you recommend for that?Thank youNan View answer

Asked 6 ´years ago

Question 34

What product could I use to add a fortifying topcoat to a newly laid floor made of prefinished oak parquet tiles? View answer

Asked 2 ´years ago

Question 35

I'm building a dining table, coffee table, and desk. Is this a good option for all 3? Ideally the dining table would be food grade. View answer

Asked 7 ´months ago

Question 36

I used this on a dining room table and love the look, but it�s extremely susceptible to grease or fats (butter, salad dressing, etc). They leave a smear even after wiping it up. Any suggestions on what to do? I'm thinking of sanding and resealing with something else. View answer

Asked 1 ´month ago

Question 37

Do you need more than 1 gallon of this product to do 2 coats? View answer

Asked 3 ´years ago

Question 38

Can you use polyureseal for exterior applications? Specifically a covered ceiling that would not get wet but fully exposed to outside. View answer

Asked 4 ´years ago

Question 39

What is best sealer for sealing in off gassing from a new vinyl floor? View answer

Asked 6 ´years ago

Question 40

Is this product suitable for an exterior cedar barrel sauna ? View answer

Asked 5 ´years ago

Question 41

Can you apply this product over a polyurethane sealed wood floor? View answer

Asked 5 ´years ago

Question 42

I'm looking for an ESPRESSO color stain? View answer

Asked 1 ´year ago

Question 43

I wish to seal the existing paint on an old door, I don't know what kind of paint is on it, what should I use? View answer

Asked 4 ´years ago

Question 44

I'm interested in sealing OSB subfloor (prevent/arrest off gassing), but the tackiness of SafeSeal will potentially/likely make installation of the Pergo click-lock flooring difficult. I'm looking at HardSeal and Polyureseal BP as other options. Any recommendations here? View answer

Asked 2 ´years ago

Question 45

Hi- I want to use one coat of your Oil Wax followed by two coats of Vermont Natural PolyWhey Floor Finish on our sanded floors. How long would you recommend letting the Oil Wax dry before applying the PolyWhey? I did a test with about 24 hours drying and it seems good, but wanted to get your input. Thanks! View answer

Asked 4 ´years ago

Question 46

I built my two young boys a bunk bed out of pine. Would the oil or wax be the better option? The wood will be touch mattresses of course so I wanted to know if wax can leave residue or stain the mattress? View answer

Asked 5 ´years ago

Question 47

How long does each coat take to dry on outdoor porches? Gloss finish View answer

Asked 2 ´years ago

Question 48

Is this product suitable for the interior walls & benches in a sauna? View answer

Asked 5 ´years ago

Question 49

I am building a wet room with bamboo wood accents. While they won't be directly exposed to streaming water, it will be a wet environment. Can I use this product to seal raw bamboo solid stock for use on walls in a bathroom setting? View answer

Asked 4 ´years ago

Question 50

I am looking for a very Low VOC polyurethane like wood sealant to use on unfinished wood that will become a countertop in a high water area. Does not need to have stain. Interior. What do you recommend? View answer

Asked 1 ´year ago

Wood Stains & Sealers Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic