Wood Stains & Sealers Q&A

Question 1

I am looking for a sealant to put over a peel and stick vinyl flooring. I am looking for a shine and to be waterproof. Is this the product I should use? View answer

Asked 6 ´years ago

Question 2

Can I use this on non waterproof Laminate flooring? View answer

Asked 5 ´years ago

Question 3

My concrete countertops are starting to discolor and become rough, would this product or another you have work to restore surface? View answer

Asked 6 ´years ago

Question 4

Is this product appropriate for sealing terracotta tile? View answer

Asked 3 ´years ago

Question 5

I am not sure how to use the BioShield Floor Milk. Do you mix with water to use as a cleaner or straight from the bottle as a floor finish? I have Marmoleum flooring that is more than 15 years old and looks like it could use a little restoration. View answer

Asked 5 ´years ago

Question 6

Would any of your products be food safe and non-toxic for an elevated 2ft up garden? View answer

Asked 6 ´years ago

Question 7

We have a White Oak outdoor dining table that we just finished and are struggling with how to finish it. The person who built it suggested polyurethane for spar varnish. Our concerns are weather durability for hot sun and rain, food and drink spills, And we prefer a flat finish if possible. We live in California or the sun is hot! And we don't want to stress about water rings on the table... Would this be a good alternative to the options above? View answer

Asked 6 ´years ago

Question 8

Is this the Best Safecoat Product to seal an Indoor Concrete Floor Slab to protect against Moisture Intrusion via the Concrete Floor Slab before applying a Vinyl sheet & then installing new Cork Floor Panels? Or is there a better Safecoat Product for protecting Moisture Intrusion underneath a Vinyl Liner beneath new Cork Flooring Tiles that will be installed 'Floating' & NOT Glued. View answer

Asked 2 ´years ago

Question 9

Can I use this product on wood that has been stained with Rubio Monocoat Oil Plus 2C? View answer

Asked 6 ´years ago

Question 10

Would this product be the same as polyurethane sealer without all the chemicals? View answer

Asked 6 ´years ago

Question 11

Do you need to sand between coats? View answer

Asked 6 ´years ago

Question 12

Our new bathroom vanity is made from acacia butcher block. The counter service will be exposed to water so I would like to use a product that will seal and protect the surface, as well as not have to reapply constantly. What product(s) would you recommend? View answer

Asked 7 ´years ago

Question 13

I had built in cabinets installed and painted with a white oil base paint. It has been three weeks now, and the smell is so bad. Will your product work on this type of painted surface (wood) and if so, which product do you recommend? View answer

Asked 6 ´years ago

Question 14

Would 100-year old oak floors that have just been professionally sanded be considered weathered or relatively non-porous? I'm trying to figure out how much it will cost for 500-600 sq. feet assuming 2 coats will be sufficient View answer

Asked 5 ´years ago

Question 15

Is this product safe for sealing reptile enclosures? View answer

Asked 5 ´years ago

Question 16

I have red oak floors that have had danish oil and paste wax on them many years ago. Do I need to get every bit of the old oil and wax off before I use this. I really don't want to sand but don't mind stripping the wax. If I need to sand do I need to get down to raw wood? View answer

Asked 5 ´years ago

Question 17

Can different sheens Acrylacq be mixed together? I cannot tell a lot of difference between the gloss and satin View answer

Asked 5 ´years ago

Question 18

I wanted a white oak natural color. My boyfriend was recommended by the paint shop that Rubio Monocoat Pure is the one. However it ruined the bookcase by making it dark when I wanted white wash natural white oak. How can I fix it and get a white oak color back? View answer

Asked 5 ´years ago

Question 19

How long does it last in the can once it's been opened? View answer

Asked 4 ´years ago

Question 20

Would this be a good option to use on an outdoor wood table intended for eating? How long will the stain last with VA weather conditions? View answer

Asked 2 ´years ago

Question 21

Do you have a smooth product to use on railings and vert spindles? View answer

Asked 7 ´years ago

Question 22

Hello! Can this Hard oil #9 be used to seal/waterproof plywood (for primarily indoor use)? View answer

Asked 5 ´years ago

Question 23

Can I use this product on sanded pine floors? The house was built in 1870 View answer

Asked 6 ´years ago

Question 24

Is this product non toxic? View answer

Asked 4 ´years ago

Question 25

I would like to seal a recipe card on a cutting board/wood serving tray, would this be the appropriate product to use? Is it food safe? View answer

Asked 6 ´years ago

Question 26

You have any pictures of the cotton white on pine? View answer

Asked 5 ´years ago

Question 27

Is your Linseed Oil Boiled or Cold Pressed/Raw? View answer

Asked 6 ´years ago

Question 28

I am looking to seal an area around a HVAC vent where asbestos (possibly) tiles have cracked. The tiles have been covered with plywood and laminate flooring, but since the cracked tiles are around the floor vent opening, I want to seal the edges. Will this product work for that? View answer

Asked 6 ´years ago

Question 29

I am looking for an alternative to Sculpt or Coat. I am a professional fine artist who sculpts with paper. I need something to make paper durable, stiff or somewhat stiff. And ?not yellow.? View answer

Asked 5 ´years ago

Question 30

Can I apply this on the stovetop cutting board I made ? View answer

Asked 6 ´years ago

Question 31

hello, tom with Siena cabinets here in las Vegas, NV. re: acrylacq:1st we spray gloss coat, then we wait 4 hrs. then we we then sand like a sanding sealer with 320 grit? then top coat with satin and let dry for 4 more hrs. or overnight and this is complete? View answer

Asked 1 ´year ago

Question 32

Could you compare BioShield Herbal Oil and AFM Safecoat Naturals Clear Penetrating Oil - why might I prefer one over the other? And does one of them "amber" the wood more than the other? I'm considering something for a new butcher block countertop which will have food on it - but I would like to tone down the appearance if possible. View answer

Asked 1 ´year ago

Question 33

I have T111 in my basement and want to seal it? Do any of your products prevent the off gassing from T111 and pressure treated 2 x 4s? View answer

Asked 5 ´years ago

Question 34

Will this change the color on new wood? View answer

Asked 6 ´years ago

Question 35

What type of maintenance and cleaning products do you recommend after this product is applied? View answer

Asked 6 ´years ago

Question 36

I want to design art craft table for kids...I was wondering if this seal would safe and hold up to toddler messes and daily cleaning? Also would this be safe over hand made toy blocks for toddlers that may put part of block in mouth from time to time? View answer

Asked 4 ´years ago

Question 37

Can deck revive be used on railings and spindles? View answer

Asked 6 ´years ago

Question 38

My standard poodle sleeps at our heads and stretches in her sleep, which causes scratches on our wall paint since we don't have a headboard. Would this prevent scratches and chipping of our wall? View answer

Asked 5 ´years ago

Question 39

What is the safest product for sealing birdhouses, Vermont Natural Coatings or ARM Safecoat? View answer

Asked 1 ´year ago

Question 40

Can the ECOS Exterior Satin paint be used with this product? View answer

Asked 6 ´years ago

Question 41

Hi! I am looking for safe wood colored stain f(gray or brown) or my raised bed garden made of pine. Can you help? View answer

Asked 5 ´years ago

Question 42

I purchased this product to apply over LifeProof Rigid Core Liguria flooring. The product doesn't seem to be adhering. Any thoughts? View answer

Asked 3 ´years ago

Question 43

I am looking for something safer than epoxy to seal tumbler cups, would this be an option? View answer

Asked 7 ´years ago

Question 44

How would I apply this on stairs, including also skirt board, mantle shoe mold and bannister? If I don't have a buffer, what process and what tools would I need? View answer

Asked 4 ´years ago

Question 45

Is this OK for engineered wood floors? View answer

Asked 5 ´years ago

Question 46

If I stain table components prior to assembly will wood glue work? View answer

Asked 5 ´years ago

Question 47

Would this be good for a raised dog feeding/water bowl? It won't likely have pooled water on the wood but will get small splashes here and there. It will be inside so not a lot of UV concern but want water resistance and a lasting finish. View answer

Asked 6 ´years ago

Question 48

Q1: We want to use the VNC Penetrating stain for our fence. We have way too much fence to try and sand. Is pressure washing with a 3400 psi washer and the 30 degree tip as effective as sanding to clean the wood and open it up to receive the penetrating stain?Q2: Based on what I have seen on our deck which was previously improperly stained. It looks like the pressure washer would be as effective if not more effective than sanding to remove the old stain, Would you agree? View answer

Asked 5 ´years ago

Question 49

Can this be used for butcher block countertops in the kitchen? View answer

Asked 6 ´years ago

Question 50

I moved into a house where cats have sprayed the paneling and it ran down to the slab flooring. Is there something I can seal the wall and flooring to keep the smell from leaching out? View answer

Asked 5 ´years ago

Wood Stains & Sealers Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic