Wood Stains & Sealers Q&A

Question 1

What would you use to seal up the toxic smell of a petroleum based caulk? I tried 7 coats of Acrylacq which diminished it somewhat, but the toxic smell is still there. Would Hardseal or Polyureseal BP be a better choice? View answer

Asked 5 ´years ago

Question 2

Does this product works over Venetian plaster which is exterior and smoothly shiny? View answer

Asked 6 ´years ago

Question 3

does it work on manufactured wood floors that are prefinished? View answer

Asked 6 ´years ago

Question 4

I want to build a wood table for outdoor use. After priming and painting it, would this product (AFM Safecoat, 2K Urethane)be the best coating to protect it from the elements? View answer

Asked 11 ´months ago

Question 5

I'm installing a garden cabin with bare pine plank floors. Can this be applied directly to protect the floors? Is matte the best to hide scratches? View answer

Asked 5 ´years ago

Question 6

Can any of your top coat products be used on a laminate countertop that's been painted with several layers of paint? And is it food safe? View answer

Asked 1 ´year ago

Question 7

can this be used for sealing aquariums/ vivariums (plywood) and to seal painted foam (backgrounds)? View answer

Asked 6 ´years ago

Question 8

Working on wooden toys for young children and would like a darker color finish than the poplar wood i work with, which finish would you recommend i use or would i need to stay with the clear finishes for safety? View answer

Asked 5 ´years ago

Question 9

Is there any petroleum and is there any polymers in this product. I am severely allergic and every product I've purchased and tested on my deck project has caused me severe inflammation. Penofin verde is not a safe product. Is yours? View answer

Asked 4 ´years ago

Question 10

Can you use on laminate floor? View answer

Asked 6 ´years ago

Question 11

I've a project with several slabs of raw live-edge Saman Acacia wood installed as kitchen counters, vanity top, and as a breakfast nook. The project is in the midwest (high humidity area) and need to ensure the finish is waterproof (around the undermount sink and in a bathroom) and does not require frequent maintenance. While a poly coating would likely be the best waterproofing option, we don't want to cover our raw wood with a plastic-looking coat and prefer to be able to spot refinish. We've had Bioshield #9 recommended to us but I wanted to see if AFM penetrating oil or AFM oil wax would be a better option in terms of waterproofing and longevity for my Saman Acacia? View answer

Asked 4 ´years ago

Question 12

Hi, I'm hoping someone can answer this that has a lot of experience with the products as I don't want to mess up my cabinets and flooring by sealing them incorrectly. I bought a 4.5 year old home and I am not feeling well in the home. It's probably outgassing? The flooring is a wood laminate. Are there any products that could be used to seal the laminate floor? Any other suggestions if not? And also, what about cabinets. Is there a seal for the cabinets given they are not painted but stained a dark espresso color? I would not want to mess up the finishes on them but at the same time I cannot be sick in my home so any suggestions you have would be greatly appreciated. I will do what it takes to be stay healthy. Thank you View answer

Asked 4 ´years ago

Question 13

Does the AcryLacq work well in an HVLP sprayer? View answer

Asked 6 ´years ago

Question 14

Is there something that could be applied before or after the hard oil #9 to add UV protection? in this case it would be for outdoor wood furniture. View answer

Asked 5 ´years ago

Question 15

Does this product contain any crystalline silica or phthalates? View answer

Asked 4 ´years ago

Question 16

I am making a kitchen table out of white oak. I have applied multiple coats of a water based urethane but am not satisfied it will protect against 3 grandkids. I used a water based urethane as I don't want any yellowing. Can I apply this product over what I have and will it give a good protection? View answer

Asked 5 ´years ago

Question 17

Can this be used on polyurethane sealed floors? If not do you have a different wax product you suggest? View answer

Asked 1 ´year ago

Question 18

If I apply this sealer with a roller, will it have bubbles ? View answer

Asked 3 ´years ago

Question 19

I'd like to try a sample of BioShield wood counter finish. I have an old oak table with all the finish worn off. We wash it all the time and the kids play on it with their clay, etc. We would like to roll out pie crust on it, etc. And would like to wash it without the water soaking into the wood. Do you have a better recommendation? View answer

Asked 7 ´years ago

Question 20

Good Afternoon, Mr. Goj, I want to paint the interior of a terracotta pot to seal it with the AFM Safecoat DynoSeal (dark color). After decoupaging the exterior of the pot, I want to seal it with the AFM Polyureseal EXT Satin (clear color). Is there a certain temperature range, they should be applied? And a level of humidity? I was going to apply indoors, if it was safe. it's been raining and a little cooler, outdoors. I purchased the samples, and will probably be buying the regular size at some point. I thank you so much for your time. Have a Merry Christmas and a Happy and Blessed New Year. View answer

Asked 4 ´years ago

Question 21

Do I have to apply paint over this after it dries or can it be used alone? View answer

Asked 4 ´years ago

Question 22

Is it safe bird perches? View answer

Asked 6 ´years ago

Question 23

Can I wait a day between applying the first and second coat of Deck Revive? I live in a warm climate and have likely missed the window of opportunity for handling all the steps in a single day (permabond, quickcrete, two coats of deck revive). I will have about three hours in the morning that i can work before the deck is above 85 degrees. I think I can get the primer and first coat on, but would need to wait until evening or the next day to apply the second coat. Will this work? View answer

Asked 5 ´years ago

Question 24

I painted my countertop with rustoleum countertop oil based paint. I put a couple coats of polyurethane. Will this give extra hardness to the countertop? View answer

Asked 6 ´years ago

Question 25

Does this contain polymerized or raw linseed oil? View answer

Asked 6 ´years ago

Question 26

I'm looking for a good sealant for a natural wood backsplash. it's like a barn wood rough texture and I'm thinking something to paint on, in a clear matte finish? View answer

Asked 4 ´years ago

Question 27

So I want to make my walls look like suede leather can this product do this? View answer

Asked 2 ´years ago

Question 28

Hi would this be enough to cover a 12x24 foot deck? View answer

Asked 5 ´years ago

Question 29

Can I use this product (Wall glaze #15) to water seal the trim and window sills in the bathroom? View answer

Asked 5 ´years ago

Question 30

Is this product water resistant to use for a coffee table or end table? View answer

Asked 5 ´years ago

Question 31

Will it adhere to Formica? View answer

Asked 6 ´years ago

Question 32

Can I use this on glass and ceramic mugs? View answer

Asked 5 ´years ago

Question 33

Can I use it to seal exterior cedar shake shingles? View answer

Asked 6 ´years ago

Question 34

How can I tell if the furniture piece I'm sealing is an oil based product? I need to seal some horrid chemically fragrance smell in a wine cabinet. View answer

Asked 5 ´years ago

Question 35

Hi! I'm looking to put a high gloss clear-coat sealer on a teardrop camper that I completely painted in a mural fashion using bright colors of acrylic paint. Would this product work? I was also hoping for uv protection. View answer

Asked 6 ´years ago

Question 36

We are redoing an old commercial building from 1940. the wooden floors are ... old ...so we painted them and love the look but they get dirty easily and have cracks that collect dirt... looking for a flexible ( not epoxy) product to Cover the paint with a waterproof protective coat to make easier cleaning.., is this product suited to this? View answer

Asked 5 ´years ago

Question 37

Does this product come in a satin or semi gloss? View answer

Asked 4 ´years ago

Question 38

Is this a good product to use for a butchers block countertop? It's been treated 3 times with mineral oil only and is not stained. View answer

Asked 5 ´years ago

Question 39

Does it waterproof? View answer

Asked 5 ´years ago

Question 40

Can Bioshield Aqua Resin Floor Finish be used to seal vinyl floor tiles? I need a clear sealant that can provide a protective coating for a vinyl (peel-and-stick tiles) floor in a kitchen and bathroom. Thanks! View answer

Asked 5 ´years ago

Question 41

I have a cat urine smell on my oak wood floors. Will this product block urine odor after application? View answer

Asked 5 ´years ago

Question 42

Would this product be appropriate to seal pressure treated wood for a children's play structure? View answer

Asked 3 ´years ago

Question 43

I'd there s Product that is food grade that can be used on a painted cutting ? View answer

Asked 4 ´years ago

Question 44

what ingredients does Safecoatext have ? View answer

Asked 1 ´year ago

Question 45

I need to seal in the off gassing from an IKEA particle board kitchen cabinet that's got melamine foil on the outside and plastic edging. Would this product be the best or would another product work better? It also needs to be durable and provide a waterproof barrier against atmospheric moisture (it's in an RV) and water spills from the sink that's above it. Mold and mildew protection in addition would be ideal. Thank you. View answer

Asked 2 ´years ago

Question 46

Hi -- do I have to machine sand a raw (naked) oak floor before applying Natural Oils Wax Finish? View answer

Asked 5 ´years ago

Question 47

Need outdoor stain for front steps and porch. Wood is brand new, fir and pine. Will these two wood types absorb the stain similarly? (fir for stairs, pine for porch; like the Sutton Grey color). How many years does the stain last? When it's time to reapply, can we apply the stain over the existing Rubio Monocoat, or do we have to sand off to reapply? View answer

Asked 1 ´year ago

Question 48

Hi, how do think this product would hold up well on stained pine wood on exterior squirrel houses, and is there a type of stain you recommend for use under this product or will It seal over any stain? etc. thanks View answer

Asked 6 ´years ago

Question 49

Can you use it on venetian plaster? View answer

Asked 5 ´years ago

Question 50

do you have a stain for finished concrete? View answer

Asked 4 ´years ago

Wood Stains & Sealers Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic