Question 1

What do you suggest for Plywood that is painted, but still putting off a smell? View answer

Asked 1 ´year ago

Question 2

I want to seal plywood and/or mdf to prevent off-gassing, but also want a hard/durable finish on the inside of drawers. Does it work to use AFM Safe Seal, then follow that with Acrylac? View answer

Asked 4 ´years ago

Question 3

Is this non toxic for birds? We want to seal our bird bath. View answer

Asked 5 ´years ago

Question 4

I have a ledge made of lava stone (Cantera) which connects the waterfall to a Koi pond. Since the lava stone is porous, I was planning on using AFM SafeCoat on the lava stone. Would it be a safe choice considering it is carrying water into the koi pond? View answer

Asked 4 ´years ago

Question 5

I have some brick on an interior wall. The brick is off gassing cigarette odor. I am seeking a product to encapsulate but also has a flat finish. (I do not the bricks to shine or have a gloss.)Suggestions? View answer

Asked 1 ´year ago

Question 6

Can I use this to persevere antique painted metal bed frame? View answer

Asked 1 ´year ago

Question 7

Can this primer be used on concrete as the layer between concrete and a self leveling concrete compound? View answer

Asked 1 ´year ago

Question 8

Why can't this be applied over SW promar 200? View answer

Asked 1 ´year ago

Question 9

Can this be used as an exterior sealing & bonding primer for: Steel garage doors with what appears to be factory-applied finish (not vinyl) oxidized (faded) but no rust? View answer

Asked 2 ´years ago

Question 10

Can I use this primer on plywood? View answer

Asked 1 ´year ago

Question 11

I have new masonite shelves that I need to stop the voc fumes from. Will be indoors. Preferably one coat, if it is primer. It will be in closet, so looks are not important. Would like it to be white. Also do I need to sand? Thank you for your help. Which Safecoat product would you recommend? View answer

Asked 4 ´years ago

Question 12

can this be tinted with a color pigment? Would like to use over Kilz primer done a few months ago and be sure I am covering everything. View answer

Asked 5 ´years ago

Question 13

Will this adhere to Kilz Mold and Mildew primer that was applied to the subfloor during mold remediation? Trying to seal the outgassing from the Kilz which was applied 3 days ago. View answer

Asked 1 ´year ago

Question 14

I have a shelving/storage unit in our mudroom (hanging coats, shoe storage, etc.) that I want to paint. I am pregnant and trying to be extra cautious with paint and primers. What do you recommend I use to initially prime the shelving unit and then which paint type to purchase? Does a specific paint type go with a specific primer? Do I need to "seal" anything with a different product once I'm done painting? Thank you. View answer

Asked 4 ´years ago

Question 15

can I use this transitional primer on oil base primer? our painter used oil base primer on oak and pine wood panels and I don't know how to fix the toxicity.We didn't put the paint yet, only the oil base primer. View answer

Asked 2 ´years ago

Question 16

Is this primer good to use under dark/black paint, on unfinished wood? View answer

Asked 4 ´years ago

Question 17

Could this primer be used as a base coat and then acrylic paint put on top after the 24 hr drying period? Trying to find a safe primer for 3d printed objects for kids. View answer

Asked 1 ´year ago

Question 18

Would this work as a replacement for mold killing primer? View answer

Asked 6 ´years ago

Question 19

I would like to use this product on a very light natural hickory hardwood floor. Will Safecoat Naturals change the color of the floor? View answer

Asked 6 ´years ago

Question 20

Good afternoon, does your product give a color to the wood? I have wood steps that were sanded and because I have had to fill in some holes, they need to be stained a bit before I put a sealer on them. I don't like all the voc sealers that are out there, Maureen Merritt View answer

Asked 6 ´years ago

Question 21

We have about 1500 sq ft of engineered oak flooring. It is pretty but is starting to lose some color and has developed some large cracks. What can I use on it? View answer

Asked 5 ´years ago

Question 22

Can I use this on wood ceilings? View answer

Asked 4 ´years ago

Question 23

20 years ago we used a " natural"oil wax (my memory thinks it was called OS wax) on the 6" maple plank floor that's in our kitchen and throughout the 1st floor. I remember a feature: supposedly you could just clean & lightly sand worn areas and reapply, and it would blend... Can I do this with Safe Coat, or do I have to sand the whole floor? The whole kitchen area is pretty worn down and grey, so I need to "refinish" that area and blend with the golden color of the floor that has been under rugs. View answer

Asked 5 ´years ago

Question 24

Can I apply this product to cabinetry that has been stained with a waterproof sealer as a finish? View answer

Asked 6 ´years ago

Question 25

Can oil wax finish be used on countertops? View answer

Asked 4 ´years ago

Question 26

I am looking for a non-toxic sealer for a butcher block countertop that we will be using as a desk. I want to protect the desk from ink stains and accidental coffee/water spills. I read that this will dry in 24 hours, but will need to cure for 2-3 weeks. Can we use it after the 24 hours have passed, or would you recommend waiting for the 2 weeks to fully cure before using a laptop/paper and pen on it? View answer

Asked 4 ´years ago

Question 27

Can this be used on seagrass chairs? View answer

Asked 5 ´years ago

Question 28

Can this be used on white washed engineered hardwood floors to make them a shade darker? View answer

Asked 5 ´years ago

Question 29

Any recommendations on how to apply this product? View answer

Asked 5 ´years ago

Question 30

I just read a review of rubio monocoat and a person also said their rag spontaneously combusted over night through the rain, is this not a concern that the floor will catch fire? I plan to use on northern red oak floor in my rv so there will be lots of stuff and cooking and traffic in a small confined area, how at risk would i be with these oil finishes? View answer

Asked 4 ´years ago

Question 31

What is it? And why do you say so much and yet nothing about what it is? What kind of oil and wax� ingredients please! View answer

Asked 1 ´year ago

Question 32

Is safe coat oil wax compatible with using safe coat durostain? We have pine planks we are having sanded professionally. View answer

Asked 6 ´years ago

Question 33

Can you use on finished floors? View answer

Asked 5 ´years ago

Question 34

Are there any vocs in this oil? View answer

Asked 5 ´years ago

Question 35

Can I use on laminate flooring? View answer

Asked 5 ´years ago

Question 36

Will this work on a concrete floor painted with an enamel paint? The rep said the clear would have to be breathable. Thanks! View answer

Asked 5 ´years ago

Question 37

Can I use this product on slate floors? View answer

Asked 5 ´years ago

Question 38

How would you go about spraying using an HVLP system? View answer

Asked 4 ´years ago

Question 39

When can I move my furniture back into the room I used the oil wax finish on? View answer

Asked 5 ´years ago

Question 40

Can I use it in an indoor sauna interior? View answer

Asked 4 ´years ago

Question 41

What is the best way to apply the sealer? View answer

Asked 6 ´years ago

Question 42

Can you get a dark finish?- View answer

Asked 5 ´years ago

Question 43

Can you wax this surface periodically with a paste type wax? View answer

Asked 4 ´years ago

Question 44

Can I use this product on the bark edge natural wood slab ? View answer

Asked 5 ´years ago

Question 45

What finish would you classify this,matte, semi-gloss,gloss? View answer

Asked 4 ´years ago

Question 46

Will this product work on waxed wood floors? View answer

Asked 4 ´years ago

Question 47

I bought an antique oak store counter that I am using for my kitchen island. I want to make the top more water/stain resistant, but I am not going to prep food directly on the counter top. Are there any products I can use to do this without sanding off the current stain? View answer

Asked 2 ´years ago

Question 48

Can I use this on an unsealed wood floor? View answer

Asked 4 ´years ago

Question 49

We just built a butcher block table out of an old piece of a bar top which has a strong paraffin odor. We have used mineral oil and a lavender essential oil to reduce the odor. It helped a little but not enough to enjoy the table in the house. Will this product keep that odor under wraps? View answer

Asked 4 ´years ago

Question 50

Can this product be used on manufactured wood flooring? Ty View answer

Asked 4 ´years ago

Browse by Topic