Question 1

I am assuming that this would not work on steps since it is a floating system. Do you manufacture anything that would work for steps? View answer

Asked 5 ´years ago

Question 2

Would this be a good application for new window installs in the home? Aluminum frame windows on concrete. Thank you. View answer

Asked 4 ´years ago

Question 3

Could the Williston Wool Carpet be custom cut and bordered, to be placed under an Elliptical Exercise Machine? View answer

Asked 4 ´years ago

Question 4

Our hardwood floors started creaking when walked on. About 50 yrs old, no treatment in 20 yrs for sure. Will this product help, what do you recommend or possible cause? Thank you, RB View answer

Asked 5 ´years ago

Question 5

How long it�s gonna take to cured?And also this one silicone is the same non toxic as AFM SafeCoat, Caulking Compound? View answer

Asked 3 ´years ago

Question 6

This is paint from mold have a prop 65 California warning? View answer

Asked 4 ´years ago

Question 7

H I am using the ChemLink M-1 in my cedar planter boxes. I use the M-1 to adhere my twin polycarbonate panels to powder coated black aluminum. It works great. My question is can the adhesive hurt the plant or vegetable growth or harmful? View answer

Asked 4 ´years ago

Question 8

We are doing tongue and groove walls in a cabin and want a natural look. What product would you recommend? View answer

Asked 4 ´years ago

Question 9

Hi, I am looking to seal a cypress, outdoor ceiling as clear as possible with UV protection. I would like to maintain the natural appearance of the wood(no stain), Will your product work for this application without cracking, pealing or discoloring over time? Our GC has used Cabot and it has a natural stain in it that I do not care for. Any assistance is appreciated. View answer

Asked 4 ´years ago

Question 10

Do you have a color chart cus I have no idea what these color nes even look like? View answer

Asked 4 ´years ago

Question 11

Hi, we want a wool carpet and have had a small amount of Earth Weave. But we just don't have the time to do what is necessary to prevent moths. So what�s the next best? We literally don't have time to vacuum more than a few times per year. View answer

Asked 3 ´years ago

Question 12

For a Redwood Deck, does this replace a penetrating oil? View answer

Asked 5 ´years ago

Question 13

I am planning to use your hardseal product over vinyl peel and stick wallpaper, but I do not want a gloss finish. Could I use the hardseal first and then apply the matte version of the polyureseal as a final finish? View answer

Asked 4 ´years ago

Question 14

Plan to install travertine flooring. Per industry recommendations, will use two layers of 3/4" subfloor (not glued together) to get a stiff floor section. However, we are concerned such a stiff floor will be 'hard' to walk on, day in, day out. Would cork add some 'give' back to this floor if applied on top of the two layers of 3/4 subflooring? View answer

Asked 5 ´years ago

Question 15

Is this better than dritac eco 7500 for Kahrs flooring? (floating floor but adding adhesive anyway). View answer

Asked 5 ´years ago

Question 16

can u use this on underlayment like quiet walk plus seams? View answer

Asked 5 ´years ago

Question 17

filling cracks in a white oak wood table. Trying to avoid epoxy. Any adverse effects to using this product on larger crack wider and deeper than 1/4" - 1/2"? View answer

Asked 8 ´months ago

Question 18

can you use this produce on cutting boards for filling cracks? what is the thickness compared to? View answer

Asked 4 ´years ago

Question 19

Hello. I bought wooden bed frame that has painted outside but inside has not so unfortunately chemical exposed. I am thinking of buying acrylacq to seal the chemical. It is a good choice? or which option is the best one of Matt/Satin/Gloss? View answer

Asked 4 ´years ago

Question 20

Can this Product be used on window glass for privacy? View answer

Asked 5 ´years ago

Question 21

I am building a baby bed/ crib for my granddaughter from walnut. If I use this product on the walnut will it need to be recoated periodically like some other oils? View answer

Asked 1 ´year ago

Question 22

Are your products sold near New York City? View answer

Asked 4 ´years ago

Question 23

Can your paint be used on metal parrot cages? View answer

Asked 4 ´years ago

Question 24

this 13 inch diameter dome fit over my existing flashing with a 15-1/2 inch outside diameter? View answer

Asked 5 ´months ago

Question 25

Do I need primer when repainting kitchen cabinets the same color? View answer

Asked 1 ´year ago

Question 26

Can I use 1lb MLV under my cork flooring to further soundproof the room? View answer

Asked 4 ´years ago

Question 27

How do large dogs do on it? View answer

Asked 1 ´year ago

Question 28

I am having a cabinet storage unit made out of poplar wood and I want to seal it to seal any off gassing and then paint over it. Would Safe Seal or Hard Seal or another AFM product (such as Acrylacq) be best for this application? View answer

Asked 3 ´years ago

Question 29

I have an interior metal door that was painted with black, low VOC, water based paint. However, it�s still out gassing and is bothering me because I'm chemically sensitive. Could I use Acrylac to seal it or would you suggest another product? View answer

Asked 3 ´years ago

Question 30

I just bought a dining table that is stained pine. Is this the best product to use to seal and protect it so food or oils from food do not stain it and it can be easily wiped up? The person who built it recommended a polyurethane coat but I'm worried about toxic chemicals especially where we will be eating food. View answer

Asked 5 ´years ago

Question 31

If my table has an oil based stain can I put a water based polyurethane on top of it and then use the AFM SafeCoat, Polyureseal BP non toxic urethane? View answer

Asked 5 ´years ago

Question 32

Getting ready to install the Marmoleum Click we received yesterday. In those areas where the panels must be cut to fit around obstructions or can't be angled in, Forbo's instructions call for shaving down the groove side of the panel and to use "wood glue" to substitute for the click mechanism. They don't specify what type of "wood glue." Am I free to use the "Titebond II" indoor/outdoor wood glue that I have on hand? One video that I found recommends using vinyl adhesive caulk, which gave me some cause for concern. Thank you in advance for your response! View answer

Asked 5 ´years ago

Question 33

I am wanting to seal raw cedar to protect it from snow and rain. I am looking for a penetrating oil WITHOUT UV protection. I have been told the added UV protectants will cause the cedar to take on an orange/red coloring. I want to preserve it's natural light color. Does this product fit the bill? View answer

Asked 5 ´years ago

Question 34

Can I use steam mop with bona in it ? View answer

Asked 3 ´years ago

Question 35

I am refinishing a set of 1940s steel cabinets. Two of the base cabinets have what I believe to be linoleum countertops. They are surrounded by stainless steel edging. There is a curve where the flat countertop and the short backsplash meet. Will your product be able to make that curve (perhaps with heat)? The widths of the cabinets are 18" and 30" so there would not be a long section needing to handle the curve. View answer

Asked 4 ´years ago

Question 36

Which would be the best product to re caulk painted drywall and formica behind sink? Thank you. View answer

Asked 6 ´months ago

Question 37

Should I use this Polyureseal or SafeSeal to paint plywood slats that go underneath my mattress on a bed frame? View answer

Asked 2 ´years ago

Question 38

Can this be applied to exposed Advantech in a nontraditional barn flooring application? View answer

Asked 4 ´years ago

Question 39

We are planning on putting this in a bathroom as well. On their install-info on the website, it states " However, in order to prevent the water to penetrate under the installed floor (which can create conditions for growing of fungus, mold or smell), a polyurethane sealant must be applied on expansion joints. Do you have anything for that? Also, when they joints I assume it means where the boards connect to each other? I am sure normal caulking around the tub etc is standard. View answer

Asked 5 ´years ago

Question 40

We are planning on putting this over porcelain tile. We are in Arizona where the climate is really dry. Do we need to use a moisture barrier or can we go straight on the tile? We are worried about something spilling on the floors and the barrier having an opposite effect and causing mold because there is no way for it to breathe. View answer

Asked 5 ´years ago

Question 41

does this work well for organic garden beds that are in full sun and irrigation? View answer

Asked 1 ´year ago

Question 42

Can Marmoleum Click be used directly on top of cement to help create a home gym floor? An elliptical and infrared sauna will need to go on top of it! View answer

Asked 4 ´years ago

Question 43

Is there particle board below the waterproof cork wood-look floors? View answer

Asked 3 ´years ago

Question 44

I) I will use this for unfinished red oak.� Are these steps correct?�1. 220 grit�sanding 2. Apply first coat 3. 220 grit�slightly sand again4. Apply second coat 5. Wait for over 24 hours 6. Apply third coat) How often do I have to coat again?III) How long can I keep the leftover?IV) Can I return the unopened gallon? View answer

Asked 3 ´months ago

Question 45

I believe the hard seal that I ordered from a different company that was closer to me. Let it freeze during shipping. I put it on wood items and it�s cloudy and uneven. Does this mean that the product is no longer usable? I don't mind using it in a garage cabinet if it�s still going to work to block off gassing and give a good seal over the cabinet. Next time, I'll buy it from you and work out the longer wait time to receive it. View answer

Asked 1 ´year ago

Question 46

Does wool carpeting produce mold/mildew? View answer

Asked 1 ´year ago

Question 47

Do you need to rinse the floor after using this product? View answer

Asked 2 ´years ago

Question 48

Will it hold up to wet conditions? View answer

Asked 4 ´years ago

Question 49

Can your coating be used on 2x4 studs (pine, non-pressure treated) in a basement remodeling project to protect against dampness and water? View answer

Asked 4 ´years ago

Question 50

We have a laminated wood kitchen table surface. Occasionally our cats jump up on it and the surfaces scratches or chips. Will Safecoat Hardseal protect the surface and prevent further chipping? View answer

Asked 5 ´years ago

Browse by Topic