SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Question 1

Can this product be used on LVP floors? View answer

Asked 5 ´years ago

Question 2

Can it be used over polyurea flooring? View answer

Asked 3 ´years ago

Question 3

Do I need to sand between gloss coats? View answer

Asked 5 ´years ago

Question 4

Can I use this for cookware? View answer

Asked 5 ´years ago

Question 5

Will this product be safe to use on a newly installed ceramic tile floor? View answer

Asked 6 ´years ago

Question 6

Can this be used over painted unsealed wood floors? View answer

Asked 6 ´years ago

Question 7

How much voc per liter ? View answer

Asked 3 ´years ago

Question 8

Can I use this to seal the floor in a shipping container/conex? View answer

Asked 5 ´years ago

Question 9

Does anybody know if this product is vegan? View answer

Asked 7 ´years ago

Question 10

Can this be used on laminate countertops once painted? View answer

Asked 4 ´years ago

Question 11

I am considering applying AFM Safecoat Polyureseal BP over flooring. Does anyone have experience with dogs on this sealer and how the sealer performed? View answer

Asked 6 ´years ago

Question 12

Can I use this product over top of my fathead sticker on my epoxy floor? View answer

Asked 5 ´years ago

Question 13

Is this product recommend for laminate flooring? View answer

Asked 5 ´years ago

Question 14

Can I use this on non waterproof Laminate flooring? View answer

Asked 5 ´years ago

Question 15

I want to use this on a island in kitchen were I prepare food, will this work? View answer

Asked 6 ´years ago

Question 16

Is this a good product to seal a butcher block countertop in my kitchen? View answer

Asked 5 ´years ago

Question 17

Can I use this directly on a raw oak door? I need the door to be moisture resistant since it is in a bathroom. View answer

Asked 3 ´years ago

Question 18

Since this is a low VOC product and not VOC free, doesn't it also emit at least low levels of VOCs into the air and if so, is there a timeline for it to stop? I would like to use this product over a "low VOC" finish on the interior of a buffet cabinet that is still off-gassing (the exterior is not), even after sitting in an open-air screened in porch for 8 months. it's lacquer finish is supposedly a low VOC product. View answer

Asked 5 ´years ago

Question 19

I just re roofing my house with prefinished hardwood floor. Which product I have to use to seal the gas off? View answer

Asked 5 ´years ago

Question 20

Can you use polyureseal for exterior applications? Specifically a covered ceiling that would not get wet but fully exposed to outside. View answer

Asked 5 ´years ago

Question 21

What is best sealer for sealing in off gassing from a new vinyl floor? View answer

Asked 7 ´years ago

Question 22

Can I use this product on wood that has been stained with Rubio Monocoat Oil Plus 2C? View answer

Asked 6 ´years ago

Question 23

Do you need to sand between coats? View answer

Asked 6 ´years ago

Question 24

Is this OK for engineered wood floors? View answer

Asked 5 ´years ago

Question 25

I am looking for a very Low VOC polyurethane like wood sealant to use on unfinished wood that will become a countertop in a high water area. Does not need to have stain. Interior. What do you recommend? View answer

Asked 2 ´years ago

Question 26

Hard Seal is also not recommended for hardwood floors because Polyureseal BP is a more durable product. View answer

Asked 6 ´years ago

Question 27

We used Mixwax Fast-Drying Polyurethane Satin on raw cherry hardwood flooring in one room. We've done 3 layers already. The off-gassing has been horrible! We plan to use another product in the remaining rooms. Would you recommend using this product. AFM SafeCoat, Polyureseal BP, as a 4th layer to seal it in order to prevent more off-gassing? Would 1 layer be enough? View answer

Asked 4 ´years ago

Question 28

Can this be used on wallpaper in a bathroom? View answer

Asked 6 ´years ago

Question 29

We bought a kids picnic table that is stained but not weather-proofed. What would be a safe product to use to do this? Is there anything food grade I could use on stained wood? View answer

Asked 5 ´years ago

Question 30

Looking at buying a home with knotty pine paneling, flooring, and cabinets. The previous owner smoked and the smell is lingering throughout the home. We suspect they were stained with an oil based product, along with an oil based polyurethane finish. Is there anything we can do to encapsulate the smell? View answer

Asked 3 ´years ago

Question 31

Can this product be used to seal wood bowls for holding hot contents like mexican salsas? Hot as in temperature. View answer

Asked 5 ´years ago

Question 32

AFM SafeCoat to seal wood wall panels in bathroom? View answer

Asked 3 ´months ago

Question 33

I've dresser drawers with an unpleasant smell when they are opened. These are solid wood for the sides and plywood for the bottom. I can't distinguish whether the smell is from the wood, or from the plywood. I want to seal it to eliminate off-gassing. I am considering various AFM Safecoat products.1. Can Polyureseal BP be used on unpainted solid wood directly? Can it be used on unpainted plywood?2. Can Hard Seal be used on unpainted solid wood directly? Can it be used on unpainted plywood?3. Can Safe Seal be applied on solid wood?I am inclined to use Polyureseal BP because the data shows that it offers better protection against off-gassing of formaldehyde, but I am not sure whether it can be applied on unfinished wood and plywood surfaces. View answer

Asked 7 ´years ago

Question 34

I inherited an old house with damaged cork tile with lots of cat urine (smelly). Some of the cork tiles are ruined, soaked with urine. To add to the problem, a lot of the cats are still here; most behave, but a few don't (they are indoor cats, I plan to rehome them soon). Enzymatic odor removers work well (should work...forever? - things like Angry Orange, Rocco & Roxie Professional Strength Stain & Odor Eliminator). Can I use the Enzymatic odor remover, then apply AFM SafeCoat Polyureseal BP or other AFM sealing product (please advise which) to seal the old cork tile, and then put your waterproof cork (floating) over it. I don't want to lay your waterproof cork flooring and then smell urine. Please advise? -Beverly View answer

Asked 5 ´years ago

Question 35

I have a new oak floor with an aluminum oxide finish and it's a matte finish that xxxx up dirt. Can I apply AFM Safecoat Polyureseal BP Satin finish on this surface without sanding? View answer

Asked 7 ´years ago

Question 36

I installed some wood flooring about 1.5 years ago in a rental. Used low-grade plywood that I cut into planks and installed for a rustic look. The tenants have been complaining about urethane smell - and I started looking for a solution and found you guys. However, after more thinking/research I don't think it's the oil-based urethane that's the problem but possible off gassing of formaldehyde. I already have oil-based polyurethane on the floors - so I'm not sure which product you think might work best to seal over what's there and help protect against more off gassing. View answer

Asked 10 ´years ago

Question 37

Can this product be used for a vinyl plank floor ? View answer

Asked 5 ´years ago

Question 38

I am looking for a seal coat for my water based countertop paint? View answer

Asked 6 ´years ago

Question 39

What about anti scratch, does this have the anti scratch in this product? View answer

Asked 5 ´years ago

Question 40

Which product is recommended for Concrete countertops? View answer

Asked 4 ´years ago

Question 41

Is this food grade safe? View answer

Asked 6 ´years ago

Question 42

Can this be used on formica countertops? View answer

Asked 5 ´years ago

Question 43

I painted a play kitchen for my granddaughter with exterior paint (not realizing it has a higher VOC). Can I seal it with Poly BP to make it safer for her to play with and for us to keep in the house? View answer

Asked 4 ´years ago

Question 44

Is there a product that can be put on polyurethane wood floors to protect you from off gassing? View answer

Asked 5 ´years ago

Question 45

Is this good for kitchen chairs? View answer

Asked 6 ´years ago

Question 46

After the final coat, can you buff/polish with 3M ultra fine finishing pads? View answer

Asked 6 ´years ago

Question 47

Is it safe to use as a finish on a baby crib? View answer

Asked 6 ´years ago

Question 48

Can this be used on pergo? View answer

Asked 5 ´years ago

Question 49

Can I use this on engineered hardwood floor? View answer

Asked 5 ´years ago

Question 50

Will this seal fake wood laminate? View answer

Asked 5 ´years ago

SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic