SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Question 1

can this be used on plywood that has a polywhey stain? View answer

Asked 1 ´year ago

Question 2

My client is asking for a non voc clear coat. Is this product considered low voc? View answer

Asked 1 ´year ago

Question 3

Can I combine AFM Polyureseal BP with AFM Safecoat Durostain Pro for one combined application use to spray on unfinished wooden cabinet shelves? What ratio is recommended? View answer

Asked 1 ´year ago

Question 4

I have oak that was previously treated( unsure with what it was treated with but it does seem like polyurethane) what is best course of action for refinishing oak? This project is in the bathroom in a high moisture area. Thank you View answer

Asked 1 ´year ago

Question 5

Like Minwax or Varathane oil based polyurethane, does this gel up after storage, even in airtight paint cans? I am assuming not since it is in a jug with what appears to be an air tight cover. Is this water based? View answer

Asked 1 ´year ago

Question 6

Can this be used on old linoleum flooring? View answer

Asked 1 ´year ago

Question 7

What is the best thing to use to apply on butcher block counters? View answer

Asked 1 ´year ago

Question 8

Can you use the matte on butcher block to form a good seal that isn't shiny?? My wife doesn't want the shiny look but oils are not working for our countertop View answer

Asked 1 ´year ago

Question 9

Could this be used on a laminate countertop? View answer

Asked 1 ´year ago

Question 10

Will this AFM SafeCoat Polyureseal BP *prevent yellowing* if applied to new, sanded Hoop Pine Plywood (similar to Baltic Birch Plywood) over time? I want to preserve the light, natural color of the wood, so prefer not to use any stain. And will it be successful in repelling moisture, or is there another product to finish/seal with? I plan to install the plywood on the walls and ceiling of my tiny house. View answer

Asked 1 ´year ago

Question 11

What's the drying time on AFM SafeCoat, Polyureseal BP? I have to do the oak, tongue and groove floor in largish sections, but we also have a dog and need something that dries quickly. View answer

Asked 1 ´year ago

Question 12

Can I use this on wooden utensils? View answer

Asked 2 ´years ago

Question 13

Can this product be applied after application of AFM SafeCoat, Concrete Floor Paint? And if so, how soon after the floor paint can we apply the polyureseal? And do we need to sand the painted concrete first? View answer

Asked 2 ´years ago

Question 14

Hi, will this product keep wood from graying over time? (for newly installed pine ceiling matt finish) View answer

Asked 2 ´years ago

Question 15

I used 3 coats over Milk paint painted over primed, ( ECOS PRIMER ) solid wood and it's still getting water stains. Can this not be used over milk paint? View answer

Asked 2 ´years ago

Question 16

Will this product off gas if heated up to 120 F ? I have a raw unfinished Wood sauna I would like to seal. The wood smell bothers me. View answer

Asked 2 ´years ago

Question 17

Does this work well over Sherwin-Williams Emerald Urethane Interior-Exterior Trim Enamel? it's being pushed as the "best" kitchen paint now. View answer

Asked 2 ´years ago

Question 18

Would this help seal the inside of kitchen cabinets that smell even after being cleaned? Would it seal off those odors. I believe it's pine wood cabinets. View answer

Asked 2 ´years ago

Question 19

I am looking for a very Low VOC polyurethane like wood sealant to use on unfinished wood that will become a countertop in a high water area. Does not need to have stain. Interior. What do you recommend? View answer

Asked 2 ´years ago

Question 20

Can I use the AFM safecoat polyureseal bp on regular water based satin paint painted floors? View answer

Asked 2 ´years ago

Question 21

Looking at buying a home with knotty pine paneling, flooring, and cabinets. The previous owner smoked and the smell is lingering throughout the home. We suspect they were stained with an oil based product, along with an oil based polyurethane finish. Is there anything we can do to encapsulate the smell? View answer

Asked 2 ´years ago

Question 22

Hi, I'm wondering if this product could be used to protect from off-gassing from a linoleum floor? The finish has worn off due to faulty cleaning, and is now off-gassing. we'd prefer to not change the floor entirely. Would this or another product help seal the off-gassing, and could it be used on organic materials such as linoleum? (don't want to risk microbial growth). Thanks a lot! View answer

Asked 2 ´years ago

Question 23

We have a mildew/ dirt odor coming from cracks in our concrete foundation. What would you recommend? Ithe cracks have been sealed but we want to prevent further odor intrusion View answer

Asked 2 ´years ago

Question 24

Hello,we are considering an exposed cement concrete flooring and are wondering how to seal it. I do have very severe chemical sensitivities (MCS). Is the polyureseal suitable for this kind of application? Are there better options?Any help would be much appreciated.Kind greetings Lenny View answer

Asked 2 ´years ago

Question 25

I am going to paint my laminate countertops and am looking for something to seal them with. Will this work or do I need to look for something else? View answer

Asked 2 ´years ago

Question 26

Can I use this directly on a raw oak door? I need the door to be moisture resistant since it is in a bathroom. View answer

Asked 2 ´years ago

Question 27

How large is the sample? View answer

Asked 2 ´years ago

Question 28

I need to seal in the off gassing from an IKEA particle board kitchen cabinet that's got melamine foil on the outside and plastic edging. Would this product be the best or would another product work better? It also needs to be durable and provide a waterproof barrier against atmospheric moisture (it's in an RV) and water spills from the sink that's above it. Mold and mildew protection in addition would be ideal. Thank you. View answer

Asked 2 ´years ago

Question 29

Can I use any of your products over a hard rubber gym floor to reduce or eliminate the VOCs it gives off? View answer

Asked 2 ´years ago

Question 30

Can this be used on slate for charcuterie boards? View answer

Asked 2 ´years ago

Question 31

Can it be used over polyurea flooring? View answer

Asked 3 ´years ago

Question 32

Can the Safecoat Polyureseal be used as a top coat over Safecoat eggshell paint (painted on wood furniture)? View answer

Asked 3 ´years ago

Question 33

does the Polyureseal BP have cancer causing chemicals in it? View answer

Asked 3 ´years ago

Question 34

Can this be used on foam? Like styrofoam for building a reptile hide? View answer

Asked 3 ´years ago

Question 35

Is there any cleaners that should NOT be used on Polyureseal BP Matte, when mopping? View answer

Asked 3 ´years ago

Question 36

Our new wood desk and bookshelf furniture are off gassing worse than anything I've ever experienced before. Can the Polyureseal BP be applied directly over the existing surface of the wood or does it need to be sanded or prepared in some way? View answer

Asked 3 ´years ago

Question 37

We bought a matching desk and bookcase. The off gassing is terrible. Polyureseal BP seems like a great answer. But I have no way of knowing if the furniture is finished with an oil based or water based finish. Is there a way to determine which? View answer

Asked 3 ´years ago

Question 38

How much voc per liter ? View answer

Asked 3 ´years ago

Question 39

New hardwood floors were stained and sealed with water based polyurethane. 4 months later, I still smell things in our home. I believe it is coming from the flooring. Would this product be able to go right over the boards, and does it seal in whatever might be coming through? View answer

Asked 3 ´years ago

Question 40

Will any of these products seal in the smell of creosote. I bought a moving container and it smells of creosote so badly I cannot use it. Any suggestions? Thank you in advance View answer

Asked 3 ´years ago

Question 41

Should I use this Polyureseal or SafeSeal to paint plywood slats that go underneath my mattress on a bed frame? View answer

Asked 3 ´years ago

Question 42

Can I use this product in the interior floor of a wooden sauna? View answer

Asked 3 ´years ago

Question 43

Can the polyureseal BP be used on a vintage cabinet that has been stained and sealed? We don't know if the stain/seal was oil based or not. View answer

Asked 3 ´years ago

Question 44

I painted a play kitchen for my granddaughter with exterior paint (not realizing it has a higher VOC). Can I seal it with Poly BP to make it safer for her to play with and for us to keep in the house? View answer

Asked 3 ´years ago

Question 45

Can this be used over shellac? View answer

Asked 3 ´years ago

Question 46

I'm paintings floor cloth for my kitchen and it's made of cotton canvas and usually painted with water based paints and sealed with 3 coats of polyurethane. I want something safe for a crawling baby. Would this work? View answer

Asked 3 ´years ago

Question 47

we want to seal raw, wood floors that have been hidden under plywood their whole 30 yr life. Our goal is the best protection from high traffic & pets. Would you recommend Safecoat, Zero VOC polyurethane, or ___ ??? View answer

Asked 3 ´years ago

Question 48

Can this be used on laminate countertops once painted? View answer

Asked 4 ´years ago

Question 49

Can AFM SafeCoat, Polyureseal BP be used to seal stone pebbles in hearth? View answer

Asked 4 ´years ago

Question 50

Which product is recommended for Concrete countertops? View answer

Asked 4 ´years ago

SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic