SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Question 1

Can polyureseal be used over raw pine doors to seal in the odor and toxins? Can those doors then be painted with AFM safe coat primer and paint at a later time? View answer

Asked 5 ´years ago

Question 2

I have primed & painted dining room chairs with a water based enamel. Will the safecoat protect the paint on the chairs? Thank you View answer

Asked 4 ´years ago

Question 3

Using on new wood can a single gloss coat do it? View answer

Asked 6 ´years ago

Question 4

Looking for a seal for wood baseboards, clear varnish, zero or minimal voc. Please advise? View answer

Asked 6 ´years ago

Question 5

Can I use this as a top coat over a painted dining table?or a dining table? View answer

Asked 6 ´years ago

Question 6

What can I put on painted concrete to seal the paint ? View answer

Asked 6 ´years ago

Question 7

My dark laminate floors show all my dogs footprints. It only stays clean and shiny about 5 minutes. Will this put a hard finish that's a little shiny that dirt won't stick too? View answer

Asked 5 ´years ago

Question 8

Can you use this to waterproof a laminate flooring? View answer

Asked 5 ´years ago

Question 9

Can I use this on coffee mugs and glassware being dishwasher and microwave safe? View answer

Asked 6 ´years ago

Question 10

Can this be used on bathroom hardwood floors to protect against water/moisture? View answer

Asked 5 ´years ago

Question 11

Can this product be used on outdoor aluminum furniture? View answer

Asked 7 ´years ago

Question 12

I'm painting my countertop, what is the best sealant or epoxy I can put over the paint to give it that ultra high gloss shine? View answer

Asked 5 ´years ago

Question 13

I am building a rock wall for my bearded dragon, using pond shield as a finish. Can I use this on grout to keep the odors in? Before applying the pond sealer? Or can I use this on the grout then the pond armor? View answer

Asked 5 ´years ago

Question 14

Can i use this product on backside of sheet vinyl in order to seal the sheet for moisture or mold bleeding through to exposed surface? View answer

Asked 5 ´years ago

Question 15

I'm interested in this product for my butcher block countertops I am about to install. How well does it hold up against moisture, especially around sink area? We won't be cutting on countertops directly and my children won't be chewing the edges..... View answer

Asked 6 ´years ago

Question 16

I installed sticky plank vinyl and would like to seal it. Would this be a good seal to use? View answer

Asked 6 ´years ago

Question 17

Can I use any of your products over a hard rubber gym floor to reduce or eliminate the VOCs it gives off? View answer

Asked 3 ´years ago

Question 18

if i put satin over flat paint will i get a satin look to the paint or should i use satin paint? View answer

Asked 6 ´years ago

Question 19

Can this be used on a kitchen counter? View answer

Asked 6 ´years ago

Question 20

Can this be used over shellac? View answer

Asked 4 ´years ago

Question 21

Would the Polyureseal help seal against off gassing from Engineered Acacia Wood flooring? It is glued down and there is about 1000 square feet of it. It has no sheen to it. It does have a UV baked on aluminum oxide finish. View answer

Asked 7 ´years ago

Question 22

Can Afm polyureseal be used on hardwood floor transitions stained with regular (not non-toxic) water-based wood stain such as Minwax? Will it change the color? Will it block vocs from that stain? View answer

Asked 7 ´years ago

Question 23

I have some gloss Acrylaq leftover from a furniture project. Now I want to do a floor with a matte or satin finish. Can I get away with using the Acrylaq as my gloss base coat, or do I need to purchase both gloss and satin SafeCoat for the floor? View answer

Asked 5 ´years ago

Question 24

Can AFM SafeCoat, Polyureseal BP be used to seal stone pebbles in hearth? View answer

Asked 4 ´years ago

Question 25

Is this food grade safe? View answer

Asked 5 ´years ago

Question 26

Does this work for formica countertops? View answer

Asked 6 ´years ago

Question 27

What do you recommend using to finish Purebond plywood cabinet carcasses? I bought SafeSeal and Polyureseal, and was planning a coat of each (more around sink and stove). Do you suggest the same finish for a bathroom vanity? View answer

Asked 5 ´years ago

Question 28

Can this be used on foam? Like styrofoam for building a reptile hide? View answer

Asked 3 ´years ago

Question 29

Hi! Can you use this directly over recently applied water based poly of another not so safe brand to help block the chemicals and off gassing of a kitchen table? View answer

Asked 6 ´years ago

Question 30

What is the maximum temperature of application? View answer

Asked 6 ´years ago

Question 31

I'm planning on laying down wood flooring as my countertops and then plan to seal it with this. Is this sealer good for countertops with heat, food, etc? View answer

Asked 7 ´years ago

Question 32

I will be setting a kitchen sink and a faucet into a butcher block countertop. I'm looking for a product that will keep the butcher block from getting that black mildew forming around the faucet and sink. Will this product do that for me? View answer

Asked 5 ´years ago

Question 33

Does this sand off easily if i applied it to the surface of a dresser drawer and want to start over? View answer

Asked 6 ´years ago

Question 34

i am going to refinish a dresser with a water-based stain (duro-tone). I already have a bottle of this but haven't used it on anything yet. can i use this over the stain on the dresser, or should i use acrylacq instead? what is the difference between this and acrylacq? View answer

Asked 6 ´years ago

Question 35

New hardwood floors were stained and sealed with water based polyurethane. 4 months later, I still smell things in our home. I believe it is coming from the flooring. Would this product be able to go right over the boards, and does it seal in whatever might be coming through? View answer

Asked 3 ´years ago

Question 36

Will the polyureseal BP adhere to either one of your concrete floor paints? I want to paint the concrete floor then put down an adhesive wall decal and then seal View answer

Asked 5 ´years ago

Question 37

Does this work well over Sherwin-Williams Emerald Urethane Interior-Exterior Trim Enamel? it's being pushed as the "best" kitchen paint now. View answer

Asked 2 ´years ago

Question 38

Is it possible to mix the gloss and satin together? I don't care about a clear finish. Thanks View answer

Asked 7 ´years ago

Question 39

Can I use on new linoleum floor to protect ? Thank you View answer

Asked 5 ´years ago

Question 40

We bought a matching desk and bookcase. The off gassing is terrible. Polyureseal BP seems like a great answer. But I have no way of knowing if the furniture is finished with an oil based or water based finish. Is there a way to determine which? View answer

Asked 3 ´years ago

Question 41

Our new wood desk and bookshelf furniture are off gassing worse than anything I've ever experienced before. Can the Polyureseal BP be applied directly over the existing surface of the wood or does it need to be sanded or prepared in some way? View answer

Asked 3 ´years ago

Question 42

Can I use this product on laminate flooring? View answer

Asked 6 ´years ago

Question 43

What is the best thing to use to apply on butcher block counters? View answer

Asked 1 ´year ago

Question 44

Can this be used on top of Ecos paints tinted varnish as an extra seal for T&G pine floors? View answer

Asked 4 ´years ago

Question 45

Can this be used on prefinished engineered hardwood flooring? View answer

Asked 5 ´years ago

Question 46

Can you use this over a laminate floor to seal it ? View answer

Asked 6 ´years ago

Question 47

Can you pour this on wooden table top to level the surface?!? View answer

Asked 6 ´years ago

Question 48

Can I paint this on a plywood subfloor before installing laminate? View answer

Asked 6 ´years ago

Question 49

Can you use the matte on butcher block to form a good seal that isn't shiny?? My wife doesn't want the shiny look but oils are not working for our countertop View answer

Asked 1 ´year ago

Question 50

What can I put on top of a paint can or a polyurethane open can o when I get to close till the next use so the skin n doesn't form over the top of the paint or s polyurethane can u help me please????? View answer

Asked 5 ´years ago

SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic