SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Question 1

I'm installing a garden cabin with bare pine plank floors. Can this be applied directly to protect the floors? Is matte the best to hide scratches? View answer

Asked 6 ´years ago

Question 2

Once a can of AFM Safecoat Polyureseal BP is opened, how long may I store it for future use? What can I do to maximize its shelf life? View answer

Asked 5 ´years ago

Question 3

Can this be used over a wood surface that's painted in water based acrylic paint?Do you have any products that can be used over water based enamel paint or acrylic paint?Thank you View answer

Asked 5 ´years ago

Question 4

Can this sealer be used on an interior wood shower wall that has been sanded? Does it provide a waterproof finish? View answer

Asked 6 ´years ago

Question 5

I'm doing a project where i would like to do this in stages of .. 1) Seal with beeswax/tung oil mix. 2) Paint an image. 3) seal with your product. Is this possible? View answer

Asked 6 ´years ago

Question 6

I have a painted countertop and it has gotten very dull. Would like to apply a poly or something to brighten it, what is an easy solution? View answer

Asked 5 ´years ago

Question 7

Can I use this on wooden utensils? View answer

Asked 2 ´years ago

Question 8

Will this safely seal a wooden cabinet that is covered in a scene painted with acrylic paints? View answer

Asked 6 ´years ago

Question 9

Is there any cleaners that should NOT be used on Polyureseal BP Matte, when mopping? View answer

Asked 3 ´years ago

Question 10

Can the polyureseal BP be used on a vintage cabinet that has been stained and sealed? We don't know if the stain/seal was oil based or not. View answer

Asked 4 ´years ago

Question 11

I painted my oak dining room chairs with 2 coats of RUST-OLEUM Milk Paint in black. Would this be suitable for sealing them? View answer

Asked 5 ´years ago

Question 12

What would you recommend for sealing the inside of a wooden reptile enclosure? View answer

Asked 5 ´years ago

Question 13

I need to seal 120 year old interior brick and mortar chimneys so they won't shed dust all over. What product would be best? I'd prefer matte finish so the brick looks original as though nothing has been applied. Thanks! View answer

Asked 7 ´years ago

Question 14

Will it work on concrete bird bath? View answer

Asked 6 ´years ago

Question 15

What's the drying time on AFM SafeCoat, Polyureseal BP? I have to do the oak, tongue and groove floor in largish sections, but we also have a dog and need something that dries quickly. View answer

Asked 2 ´years ago

Question 16

Hello, I am interested in this product. Like many people here, I've recently refinished some rooms in my house with an oil based poly and the smell still isn't gone. I'd like to finish the rest with this product, but I'm worried about it not matching the rest of the floors. I have 100- year-old red oak that's being sanded and refinished. Will this finish give the floors a similar look in terms of color, to a classic poly finish? Thank you! View answer

Asked 7 ´years ago

Question 17

Looking for a lasting matte finish on a dining table we built . The finish is going to a dark brown black . What do you recommend out of your products and why apply a gloss then matte over finish? Thank you View answer

Asked 5 ´years ago

Question 18

I have a new oak floor with an aluminum oxide finish and it's a matte finish that xxxx up dirt. Can I apply AFM Safecoat Polyureseal BP Satin finish on this surface without sanding? View answer

Asked 7 ´years ago

Question 19

I have an old township road bridge plank that I am wanting to refinish and make interior shelving. The plank has a tar odor emitting. I am looking for a clear odor blocking sealer, and would LIKE to be able to keep the rustic look, but have nicely finished. Product advice? View answer

Asked 10 ´years ago

Question 20

Can you pour this product on a countertop like a self-leveling how thick Can you pour each coat? View answer

Asked 5 ´years ago

Question 21

I have stained butcher block countertops, can I use this to make them food safe? View answer

Asked 6 ´years ago

Question 22

I painted my laminate formica countertops with a paint kit. it's holding up well, but the glossy finish is showing wear and scuffs. I'd like to take it to a matte or satin finish, but the paint kit company only offers gloss. If I sand with a fine grit and dull the surface, can I use this to reseal? How durable is it? View answer

Asked 6 ´years ago

Question 23

How long does it take to dry? View answer

Asked 7 ´years ago

Question 24

Ha how long does it take for safecoat polyseal BP to dry? View answer

Asked 6 ´years ago

Question 25

does it seal concrete safe for fish ponds/submerged in water? View answer

Asked 6 ´years ago

Question 26

Im installing laminate floor what would i use to seal it & how much would i need for 1500 sq ft ? Ty View answer

Asked 5 ´years ago

Question 27

Which is the best for a kitchen concrete countertop-Polyureseal BP or the Acrylacq? View answer

Asked 5 ´years ago

Question 28

Hello, I have 1 gallon of the SafeCoat Polyureseal in matte and 1 gallon in satin. I will likely need to use 2 gallons for my project, 1 initial coat and then a second on top. Is it possible to mix the two gallons together and then proceed with my project, or should I use the matte first and then follow it up with the satin? View answer

Asked 5 ´years ago

Question 29

I discovered oak floors in my kitchen after pulling up layers of vinyl flooring. I want to sand the floor and protect with a non-toxic product that will stand up to a kitchen, My concern is to protect a floor susceptible to water food splashes etc. I can't leave the home and am sensitive to toxic fumes. What product would you recommend? View answer

Asked 5 ´years ago

Question 30

What is the difference between this product and the Vermeister zero-VOC polyurethane product? I need a clear matte finish for old hardwood floors that I am refinishing. They have already been sanded and I am keeping the bare color and need a sealant. View answer

Asked 6 ´years ago

Question 31

Hi, will this product keep wood from graying over time? (for newly installed pine ceiling matt finish) View answer

Asked 2 ´years ago

Question 32

I was wanting to use this to encapsulate oil based stain, but read it is not too be used on oil based product. Is there another product like this that will work? View answer

Asked 6 ´years ago

Question 33

We are using interior plywood as a temporary floor in our yurt. Do we need to seal both sides of the sheet? The interior plywood we will use as a temp floor sits on a platform of exterior plywood and will be covered with the interior plywood, do we need to seal the exterior plywood of the platform too? View answer

Asked 6 ´years ago

Question 34

Will this work to seal chemicals in T1-11 boards that have been used inside? Also, can it be painted over with regular water-based paint? View answer

Asked 5 ´years ago

Question 35

Would this help seal the inside of kitchen cabinets that smell even after being cleaned? Would it seal off those odors. I believe it's pine wood cabinets. View answer

Asked 2 ´years ago

Question 36

Can I combine AFM Polyureseal BP with AFM Safecoat Durostain Pro for one combined application use to spray on unfinished wooden cabinet shelves? What ratio is recommended? View answer

Asked 1 ´year ago

Question 37

Hi! I am Remodeling our tiled bathroom and I have already finished priming and painting all of the tile and I'm looking for an all natural water-based polyurethane (or whatever you can recommend) to clear coat the tile?Thank you! View answer

Asked 5 ´years ago

Question 38

I am going to paint my laminate countertops and am looking for something to seal them with. Will this work or do I need to look for something else? View answer

Asked 3 ´years ago

Question 39

Is your product recommended for a butcher block countertop? View answer

Asked 6 ´years ago

Question 40

Can this be used over MDF furniture? View answer

Asked 4 ´years ago

Question 41

I need to seal in the off gassing from an IKEA particle board kitchen cabinet that's got melamine foil on the outside and plastic edging. Would this product be the best or would another product work better? It also needs to be durable and provide a waterproof barrier against atmospheric moisture (it's in an RV) and water spills from the sink that's above it. Mold and mildew protection in addition would be ideal. Thank you. View answer

Asked 3 ´years ago

Question 42

What is a green substitute for Superior Pearl EHC Knife Grade (Epoxy for sealing seams for countertop installation)? View answer

Asked 4 ´years ago

Question 43

Can i use the AFM SafeCoat, Polyureseal BP, or your other products, over pressure treated exterior plywood? View answer

Asked 6 ´years ago

Question 44

I have a 20' shipping container with a wood floor that I'm told was treated with a pesticide. I'm turning it into a workshop space. Can your product seal the floor so there is no risk from the pesticide treatment? View answer

Asked 6 ´years ago

Question 45

we want to seal raw, wood floors that have been hidden under plywood their whole 30 yr life. Our goal is the best protection from high traffic & pets. Would you recommend Safecoat, Zero VOC polyurethane, or ___ ??? View answer

Asked 4 ´years ago

Question 46

I'm using this to protect unstained SPF indoor stairs in a cabin. These are 2 x 10's. Do I need to coat the underside? I don't think they should warp as they have heavy iron brackets across the ends. View answer

Asked 6 ´years ago

Question 47

Hi! Frequent shopper from your inventory. I have a new dresser in solid parawood to build for my son. I discovered that the back panels and bases to the drawers are plywood/particle board. I want to use the maple stain but which sealer is the best for sealing out any off gassing, that is also the safest for his clothing to touch? View answer

Asked 5 ´years ago

Question 48

We have just installed a heavy-duty vinyl glue down flooring over concrete with an underlayment and it looks fabulous! The problem is it seems to absorb anything it did not come with directions so I'm wondering if this product would work to seal the vinyl? View answer

Asked 5 ´years ago

Question 49

Can this product be cut with mineral spirits? I want to get a really smooth finish and have read about people cutting traditional polyurethane with mineral spirits to have more time to work with it on the surface. View answer

Asked 5 ´years ago

Question 50

Can this product provide a similar finish to epoxy? I like the idea/look of painted laminate countertops finished with epoxy but without the fumes and with an easier application. View answer

Asked 5 ´years ago

SAMPLE - AFM SafeCoat, Polyureseal BP, Matte Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic