Question 1

We are not sure if the previous floor finish on our hardwood floors was oil-based. If the floor is sanded first can we then use AFM SafeCoat, Acrylacq Item #1035 ? View answer

Answer posted 6 years ago

Question 2

Do you sell exterior glossy paint ? View answer

Answer posted 6 years ago

Question 3

Does it work for bathroom ceilings? View answer

Answer posted 6 years ago

Question 4

Would this product work on an exterior cedar deck? I've cleaned it with a Sherwin-Williams Cleaner & their Revive enhancer? View answer

Answer posted 6 years ago

Question 5

Could it be install over carpet? View answer

Answer posted 6 years ago | Bamboo Flooring

Question 6

Is this material appropriate for use in a bathroom? View answer

Answer posted 6 years ago | Cork Flooring

Question 7

Can I use this product to paint an outdoor cement slab for a basketball court? View answer

Answer posted 6 years ago

Question 8

Is there any combination of Rubio Monocoat colors that will yield an antique European french white oak style? View answer

Answer posted 6 years ago

Question 9

What type of maintenance and cleaning products do you recommend after this product is applied? View answer

Answer posted 6 years ago

Question 10

Would AFM SafeCoat Hard Seal be the right product to use on a new mirror that's painted frame I suspect is made on MDF? View answer

Answer posted 6 years ago

Question 11

can this be used on metal in a shower? Is it waterproof? View answer

Answer posted 6 years ago

Question 12

Can this product be used on concrete floor to turn to use as a shower floor? View answer

Answer posted 6 years ago

Question 13

We have two wine barrel end tables we would like to keep the color but preserve the wood. We use them outside but store they for fall/winter. What would be the best product to use? View answer

Answer posted 6 years ago

Question 14

I want to change the colour of our bar stools which are very light to a honey golden colour. What do you recommend? View answer

Answer posted 6 years ago

Question 15

can Marmoleum products be used for countertops? If not do you have a product suitable for that ? View answer

Answer posted 6 years ago | Forbo Marmoleum Splash - Sheet

Question 16

is it good for a pressure treated exterior deck and how long does first coat last? View answer

Answer posted 6 years ago

Question 17

What is the installation process ? View answer

Answer posted 6 years ago

Question 18

Is this tape White? View answer

Answer posted 6 years ago

Question 19

Is the penetrating water proofer paintable? View answer

Answer posted 6 years ago

Question 20

if i put satin over flat paint will i get a satin look to the paint or should i use satin paint? View answer

Answer posted 6 years ago

Question 21

I don't see steel as a compatible metal. Is steel compatible with this primer? View answer

Answer posted 6 years ago

Question 22

Can you apply another type of paint on top? View answer

Answer posted 6 years ago | Paints & Primers

Question 23

What adhesive is used? View answer

Answer posted 6 years ago | SAMPLE - Forbo Marmoleum Striato - Sheet, Desert Sand

Question 24

Does this product dry with a natural finish? In other words is there any gloss to it? View answer

Answer posted 6 years ago

Question 25

I am removing old vinyl tile flooring from the 1980's that was glued down with a black adhesive that has an incredibly strong chemical odor. It doesn't contain asbestos, we had it tested. The subfloor is plywood. The smell is definitely coming from the adhesive because there is no smell at all until the flooring comes up. Can we apply the Hard Seal over the adhesive that's stuck to the subfloor to encapsulate the chemical off-gassing before installing the new wood floor? The last thing I want is for some horrible chemical reaction between this product and the adhesive. (Unfortunately we do have to remove the vinyl flooring rather than lay the new wood flooring over it because it's so uneven.) View answer

Answer posted 6 years ago

Question 26

What is the process of re-treating the deck in approximately 4-6 years after applying Deck Revive the first time? Do you simply add another coat of Deck Revive or does the old need to be removed first? View answer

Answer posted 6 years ago

Question 27

How do you install it? View answer

Answer posted 6 years ago | Cork Flooring

Question 28

I have particle board in upstairs halls I want to smooth the surface can have a little texture. Would this be safe to use under chalk paint or kilz paint. Must be nontoxic and animal safe? View answer

Answer posted 6 years ago

Question 29

How hard is cork flooring compared to porcelain tile? View answer

Answer posted 6 years ago | Cork Flooring

Question 30

I am wondering does it have shine like polyurethane??? View answer

Answer posted 6 years ago

Question 31

can this product be used to lay 300x300 cm ceramic floor tiles ? View answer

Answer posted 6 years ago

Question 32

Hi, I am looking to repaint an old fence that had weathered quite a bit and hit by moss and lichen. I had cleaned it and sanded it down but looking to restore and protect it but also have a choice of colors to choose from. What would be my best bet with an environmentally responsible primer/paint/sealant? I was thinking a Safecoat transitional primer followed by their exterior paint satin but not sure? Thank you,Yaniv View answer

Answer posted 6 years ago

Question 33

Hi! Can you use this directly over recently applied water based poly of another not so safe brand to help block the chemicals and off gassing of a kitchen table? View answer

Answer posted 6 years ago

Question 34

I am interested in the Marmoleum planks. I will be installing it over a wood subfloor. My question concerns the density of the planks. In the room will be two steel production tables on casters that weigh about 500 lbs each. Do I need to be concerned about these planks dimpling under the weight of these tables? Also, will the planks stay flat and in place after repeated moving of the tables over time? View answer

Answer posted 6 years ago

Question 35

Would any of your products be food safe and non-toxic for an elevated 2ft up garden? View answer

Answer posted 6 years ago

Question 36

Would this work to re-affix a couple of spots of a linoleum floor where corners are curling up a couple inches? View answer

Answer posted 6 years ago

Question 37

What is the difference between this product and Vermont Natural Coatings, Exterior, Penetrating Water Proofer other than the fact that this one is a stain too? I have 2 uses: (1) Raised bed box made out of cedar and (2) pressure treated lumber that will frame lattice. Thanks View answer

Answer posted 6 years ago

Question 38

Should we wax the floor? View answer

Answer posted 6 years ago

Question 39

I have excess moisture in my living room and dining room concrete floor approximately 600 sq feet.I installed pergo gold underlayment with 10xmoisture protection barrier. And laminate flooring But after a couple months months im having major mold mildew odor coming from my floor.What to do!!?!??? View answer

Answer posted 6 years ago

Question 40

Would this work well to protect a child's spruce sandbox inside and out from UV and water damage? The sand will occasionally be wet, but the sandbox only has four sides, not a bottom, so it wouldn't really be submerged. It needs to be non-toxic. View answer

Answer posted 6 years ago

Question 41

Can I apply this over painted MDF paneling? View answer

Answer posted 6 years ago

Question 42

We have an exterior door that is about 70 years old with traces of original paint. We have sanded the rough spots but would like to preserve it in its current state from peeling further. Will this product work on it as a clear sealant? If not, can you recommend something else? View answer

Answer posted 6 years ago

Question 43

Is this a good product for Armstrong vinyl flooring? Don't know if it is "luxury" or not. View answer

Answer posted 6 years ago

Question 44

can you apply this product over 100% acrylic paint? View answer

Answer posted 6 years ago

Question 45

Does this product come in an undyed/uncolored option for those who like the natural color of cork? View answer

Answer posted 6 years ago

Question 46

You say pressure treated wood should sit for 6 months. Sit inside in dry environment? Outside? What is the problem if I don't wait 6 months? View answer

Answer posted 6 years ago

Question 47

Would this product be appropriate for a chicken coop? View answer

Answer posted 6 years ago

Question 48

Can you use your product to remove glue residue from the bottom of a fiberglass boat? View answer

Answer posted 6 years ago

Question 49

Would this work to adhere a few inches of linoleum flooring that is curling up? View answer

Answer posted 6 years ago

Question 50

Painting kitchen floor tiles with a bonding primer then patio and floor paint. Is your sealer ok to cover and protect the job? No yellowing? View answer

Answer posted 6 years ago

Browse by Topic