SAMPLE - AFM SafeCoat, Naturals Oil Wax Finish Q&A

Question 1

Hello, I was wondering if this could be used to seal concrete/cement crafts such as coasters or trays? View answer

Asked 4 ´years ago

Question 2

I have trim that is stained with minwax oil based stain and we were in a hurry and installed it without finish, can this go over that? View answer

Asked 5 ´years ago

Question 3

What's the difference between a sheen and a gloss in your product? Which shines the wood more? View answer

Asked 6 ´years ago

Question 4

Is this suitable for mango wood? Can you apply it on top of a stain? View answer

Asked 7 ´years ago

Question 5

I just used polyurethane but want something stronger for my dog. Can I apply over the polyurethane? View answer

Asked 6 ´years ago

Question 6

Does this need to be buffed like a wax finish? View answer

Asked 5 ´years ago

Question 7

Does the color look odd on Walnut Hardwood Flooring? What is the maximum number of coats applied to flooring? I am interested in using more than 3 coats on a kitchen floor because of high traffic. View answer

Asked 7 ´years ago

Question 8

Our home is 175 years old. We sanded and used gym seal on many of the pine floors about 35 years ago. Needless to say, they're looking dry and sad. Must we sand before using AFM Naturals Oil Wax finish? How long must we wait to replace rugs and furniture? Also, I don't understand on the pdf of instructions about "buffing" with sandpaper. View answer

Asked 5 ´years ago

Question 9

I have 60 year old hardwood floors that have been covered with carpeting from previous owner and now they have been exposed for about 30 years and they have been only waxed with Johnson and Johnson hardwood floor wax which you can no longer get. Right now they are just worn with nothing at all on them and I need to find a wax that will bring them back to life. Will this wax do the job for my floors? View answer

Asked 5 ´years ago

Question 10

I own a pine Glimakra loom. It feels very dry. What product will preserve the wood as is? View answer

Asked 6 ´years ago

Question 11

I will be sanding wood floors but do not want to finish with stain or polyurethane as I do have to live here what do you suggest? View answer

Asked 6 ´years ago

Question 12

Is Safecoat suitable (no differential color change) for hardwood over hydronic radiant floor? Tube spacing about 12 inches with aluminum heat diffusers. View answer

Asked 6 ´years ago

Question 13

We have an old hardwood floor and where a the original stain or coating has worn off considerably. It does not have any plastic coating. We were going to have it sanded, but told that it is too thin to sand. Could we apply this over the partial stain without sanding? View answer

Asked 3 ´years ago

Question 14

Is this recommended for shiplap walls? View answer

Asked 6 ´years ago

Question 15

How often does this finish have to be rewaxed if routine cleaning is vacuuming and mopping with damp cloth? View answer

Asked 5 ´years ago

Question 16

Can this be put over resin to make a food grade surface? View answer

Asked 5 ´years ago

Question 17

Will this work on Baltic birch that will be exposed to high temperatures, as well as sub freezing temperatures? Looking to seal the interior of a teardrop trailer that will be stored outdoors in Nevada. I'm steering away from the polyureseal as blushing from condensation is a possibility. View answer

Asked 5 ´years ago

Question 18

What is the best finish for an oak kitchen table? I want to prevent white cloudy marks from water and heat. It also has to be durable and washed daily. View answer

Asked 6 ´years ago

Question 19

I am building a children's bed out of Yellow Pine for a friend and she is very conscious of VOCs and harmful chemicals. Even Tung Oil is not up to her standards. Is this a product you would recommend for this type of item? Or is there another product you would suggest? View answer

Asked 7 ´years ago

Question 20

I want to use this product on pine floors after a coat of pickling (1 part Floetrol, 1 part water, 2 part latex paint). Will this product work and be durable with two coats? View answer

Asked 7 ´years ago

Question 21

Can this be applied over tung oil on floors? View answer

Asked 5 ´years ago

Question 22

Can this be used over chalk or clay based paint? I'm vegan and most furniture waxes have beeswax in them. View answer

Asked 6 ´years ago

Question 23

Can i use this over a tung oil finish? View answer

Asked 6 ´years ago

Question 24

Hi there! We are looking to purchase this to use on our oak hardwood floors in our kitchen. I see that the drying time is 24 hours, but the cure time is 2-3 weeks. Should we wait 2-3 weeks before reinstalling base cabinets and appliances? Thank you! View answer

Asked 6 ´years ago

Question 25

Hello, can I use this product to seal pine plywood walls and cabinets? Looking for something low VOC but still provides moisture protection especially in areas like the bathroom. View answer

Asked 4 ´years ago

Question 26

Can this be used after staining the wood? View answer

Asked 7 ´years ago

Question 27

How frequently do you reapply the oil wax finish in a wood flooring application? Especially in the more trafficked areas like entry hallways? View answer

Asked 7 ´years ago

Question 28

I bought a mid century modern three drawer dresser that is solid wood. I planned to use it as the sink vanity for my guest bathroom. Can I use this to protect the wood from the humidity of showers? View answer

Asked 6 ´years ago

Question 29

I have old pine boards that has shellac throughout my house. Can this product be applied over this. Shellac last out on over 15 years and beginning to peel. Don't want to use shellac? View answer

Asked 4 ´years ago

Question 30

Is it bathtub safe? View answer

Asked 6 ´years ago

Question 31

I applied 2 coats yesterday and then used rags to remove excess oil. It is still drying. Would it help to buff with orbital buffer? View answer

Asked 5 ´years ago

Question 32

Hello. I have LEED Certified oiled wood flooring in my condo. It is stained dark walnut. Currently I clean it with Bona floor cleaner and a mop. , and vacuum in between. There are small areas or wear near kitchen sink and a few nicks but it is otherwise beautiful. Will this product revive these areas as well as protect the floor from more scratches and nicks? How do you apply it to a large area? View answer

Asked 5 ´years ago

Question 33

Hi -- do I have to machine sand a raw (naked) oak floor before applying Natural Oils Wax Finish? View answer

Asked 5 ´years ago

Question 34

can AFM Naturals Oil Wax Finish be used on 2X6 clear redwood exterior decking ? View answer

Asked 1 ´year ago

Question 35

How much would be needed to seal approximately 1200 sq ft of newly installed bamboo flooring? View answer

Asked 7 ´years ago

Question 36

What do you recommend buffing this with to ensure the grain of the wood is laid down? Despite sanding well, a white buffing pad caught the wood and raised some rough spots and I'd like a smooth floor after spending so much time on this seal. View answer

Asked 5 ´years ago

Question 37

We recently had a live edge walnut table made for us and the builder finished it with Watco Danish Oil. We have three small children and don't feel the finish is hardy enough for us and we want something that is safe for our kids to eat off of and will be water repellant. There are a couple knots in the wood and small gaps in the board seams that need to be filled as well to prevent crumbs and liquid from entering - will I be able to use this product for this purpose as well or do you have another one you might recommend? View answer

Asked 7 ´years ago

Question 38

I have unfinished white pine flooring that I want to stain naturally (vinegar and steel wool). Can I apply this over that kind of stain? View answer

Asked 4 ´years ago

Question 39

Hi there. I wanted to ask if your product stands up to heat? I want to make some of my own wooden trivets for hot dishes I put out to serve. Wondering if this product would work for this type of project? View answer

Asked 5 ´years ago

Question 40

Would this product work on a bluestone fireplace slab? I am looking to enrich the stone (deeper color) and blend in the waxy stains from trying to use homemade fat wood. ( from soy and paraffin candle dregs) View answer

Asked 5 ´years ago

Question 41

How to apply? View answer

Asked 5 ´years ago

Question 42

We have a 1820 home and our bedroom has wide plank pine floor that 25 years ago were coated with a water based poly . Can we use this product on it? View answer

Asked 5 ´years ago

Question 43

I have natural antique pine floors that were installed in the new construction of our home. We are builders. There are a lot of furniture dents in the dining room and kitchen floors. Will this product act as an floating self leveling surface treatment. Or will I have to re sand the floors? View answer

Asked 6 ´years ago

Question 44

I treated our oak counters with Bioshield wood counter finish. I'd like it to be more water resistant. Would you recommend doing more layers of Bioshield or AFM Safecoat Oil Wax Finish? View answer

Asked 5 ´years ago

Question 45

We have an old workbench that is now our kitchen island. It gives us slivers. Would this be a good solution that is safe with food? How long does it last? Thanks! View answer

Asked 5 ´years ago

Question 46

I have some stained pine tables that I have used old English oil on as well as sc Johnson paste wax- my concern is water stains. It's not great furniture, but I want something to really seal the wood. Would I use this? View answer

Asked 5 ´years ago

Question 47

Can this product be sprayed on like a catalyst product? View answer

Asked 6 ´years ago

Question 48

We bought a piece of furniture with only a wood veneer and it is off gassing and the whole room stinks. Could this seal in the chemical scent? View answer

Asked 5 ´years ago

Question 49

I would like list of the ingredients in AFM Safecoat Natural oil wax finish? I am looking for a product with no petroleum-based ingredients at all. View answer

Asked 4 ´years ago

Question 50

Can i use this outside for a porch? View answer

Asked 6 ´years ago

SAMPLE - AFM SafeCoat, Naturals Oil Wax Finish Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic