SAMPLE - AFM SafeCoat, Naturals Oil Wax Finish Q&A

Question 1

I have applied this product to flooring in my home. I would like a bit more shine and protection. It there a poly type product I can apply over the top of this? View answer

Asked 1 ´year ago

Question 2

I'm building a dining table, coffee table, and desk. Is this a good option for all 3? Ideally the dining table would be food grade. View answer

Asked 1 ´year ago

Question 3

can AFM Naturals Oil Wax Finish be used on 2X6 clear redwood exterior decking ? View answer

Asked 1 ´year ago

Question 4

What should I use to seal pressure treated wood (outside) so the chemicals are sealed in? View answer

Asked 1 ´year ago

Question 5

I am hoping to find a cleaner that can be bought locally or made/ mixed by hand (like a vinegar/castille solution). Is there anything that could be purchased at a big box store or Ace Hardware that could be used on these floors? Thank you! Just wanting to reduce environmental impact! View answer

Asked 1 ´year ago

Question 6

What is it? And why do you say so much and yet nothing about what it is? What kind of oil and wax... ingredients please! View answer

Asked 1 ´year ago

Question 7

Hi- I've applied your oil wax finish to my bamboo end cut counter. Is it wise to reapply once a year? Do I use the same product?Thanks for your guidance.Kathy View answer

Asked 2 ´years ago

Question 8

Hi! Love your website. So helpful! Could I use this as a sealer on authentic milk painted cabinets? View answer

Asked 2 ´years ago

Question 9

We have an old hardwood floor and where a the original stain or coating has worn off considerably. It does not have any plastic coating. We were going to have it sanded, but told that it is too thin to sand. Could we apply this over the partial stain without sanding? View answer

Asked 2 ´years ago

Question 10

I bought a dresser with drawers stained with an oil-based stain. Even after 6 months, the drawers still emit an odor. Is this sealer an odor sealer? View answer

Asked 2 ´years ago

Question 11

I applied this to some cedar but don't like how it changed the color. The amber tone is too dark. Could I apply a Rubio monocoat stain over it or do I need to sand it down first? View answer

Asked 2 ´years ago

Question 12

What metals are used in the carboxylate metallic salts that are in the AFM SafeCoat, Naturals Oil Wax Finish? View answer

Asked 3 ´years ago

Question 13

can it be used on vct floor to isolate vinyl pollution? View answer

Asked 3 ´years ago

Question 14

I bought an antique oak store counter that I am using for my kitchen island. I want to make the top more water/stain resistant, but I am not going to prep food directly on the counter top. Are there any products I can use to do this without sanding off the current stain? View answer

Asked 3 ´years ago

Question 15

I would like list of the ingredients in AFM Safecoat Natural oil wax finish? I am looking for a product with no petroleum-based ingredients at all. View answer

Asked 3 ´years ago

Question 16

I have old pine boards that has shellac throughout my house. Can this product be applied over this. Shellac last out on over 15 years and beginning to peel. Don't want to use shellac? View answer

Asked 3 ´years ago

Question 17

I don't have access to a buffer. Is a buffer absolutely necessary to apply? Why apply a second coat while first coat is still wet? Then rub any excess off after 15 minutes? View answer

Asked 4 ´years ago

Question 18

We are looking to apply a natural penetrating oil to our floors. We're concerned with the application process involving a buffer. We have 2 x 120 sq ft areas, a smaller 60 sq ft area and 2 small hallways (6'x3'); we don't think that using a full size floor buffer will be very easy in small spaces. Is it advisable to use a orbital sander with a buffer pad? Is there any additional application resources we could reference outside of the pdf? View answer

Asked 4 ´years ago

Question 19

We want to lay unfinished southern pine floors in our Living room approx 950sq ft. Everyone has warned us not to. We also do not want a poly . We cannot decide between the Rubio Monocoat Pure or the Oil Wax Finish. Any suggestions ? View answer

Asked 4 ´years ago

Question 20

Hello, I was wondering if this could be used to seal concrete/cement crafts such as coasters or trays? View answer

Asked 4 ´years ago

Question 21

I have unfinished white pine flooring that I want to stain naturally (vinegar and steel wool). Can I apply this over that kind of stain? View answer

Asked 4 ´years ago

Question 22

Hello, can I use this product to seal pine plywood walls and cabinets? Looking for something low VOC but still provides moisture protection especially in areas like the bathroom. View answer

Asked 4 ´years ago

Question 23

What product would you recommend for waterproofing leather or leather type products that will absorb water otherwise? View answer

Asked 4 ´years ago

Question 24

I treated our oak counters with Bioshield wood counter finish. I'd like it to be more water resistant. Would you recommend doing more layers of Bioshield or AFM Safecoat Oil Wax Finish? View answer

Asked 4 ´years ago

Question 25

I used Watco Butcher Block Stain and Finish in hazelnut. I love the color. Can this product be used on it for maintenance? View answer

Asked 4 ´years ago

Question 26

Would 100-year old oak floors that have just been professionally sanded be considered weathered or relatively non-porous? I'm trying to figure out how much it will cost for 500-600 sq. feet assuming 2 coats will be sufficient View answer

Asked 4 ´years ago

Question 27

Hi. I read one of these answers wrong I think. I'm working on a butcher block countertop. I was planning on using this product. I already have now. But now I've decided I need to stain the countertop. Is it possible to use Rubio Monocoat 2C Oil stain on the wood and apply this on top for extra protection? TIA for your help. View answer

Asked 4 ´years ago

Question 28

We bought a piece of furniture with only a wood veneer and it is off gassing and the whole room stinks. Could this seal in the chemical scent? View answer

Asked 4 ´years ago

Question 29

Hello. How long does safecoat naturals oil wax need to dry before walking on it? View answer

Asked 4 ´years ago

Question 30

Going to use this on a luan floor installed on the early 1980's. Removed the nasty carpet on top of it and it's perfectly level with the floor. Lightly sand it then apply this product. Thoughts? View answer

Asked 4 ´years ago

Question 31

Would this product work on a bluestone fireplace slab? I am looking to enrich the stone (deeper color) and blend in the waxy stains from trying to use homemade fat wood. ( from soy and paraffin candle dregs) View answer

Asked 4 ´years ago

Question 32

Will this product work on waxed wood floors? View answer

Asked 4 ´years ago

Question 33

Can this be used for interiors? View answer

Asked 4 ´years ago

Question 34

I recently oiled my Eucalyptus patio furniture with Teak oil. Would this product be recommended to now be applied to the furniture? View answer

Asked 4 ´years ago

Question 35

What wood filler should I use with this topcoat? View answer

Asked 4 ´years ago

Question 36

Can this be put over resin to make a food grade surface? View answer

Asked 4 ´years ago

Question 37

How often does this finish have to be rewaxed if routine cleaning is vacuuming and mopping with damp cloth? View answer

Asked 4 ´years ago

Question 38

How well does this product work with cork floors? How does it hold up with expanding and contracting floors? Any tips for application? View answer

Asked 4 ´years ago

Question 39

When refinishing a Pine floor that was originally treated with Safe coat 3 years ago. Does the floor need to be sanded ? View answer

Asked 4 ´years ago

Question 40

I have 60 year old hardwood floors that have been covered with carpeting from previous owner and now they have been exposed for about 30 years and they have been only waxed with Johnson and Johnson hardwood floor wax which you can no longer get. Right now they are just worn with nothing at all on them and I need to find a wax that will bring them back to life. Will this wax do the job for my floors? View answer

Asked 5 ´years ago

Question 41

What finish would you classify this,matte, semi-gloss,gloss? View answer

Asked 5 ´years ago

Question 42

I am working on sanding and painting my baby crib , looking for a safe product to protect the sanded wood that I don't want to paint. Is this product safe for a refurbished baby crib ? View answer

Asked 5 ´years ago

Question 43

How would you go about spraying using an HVLP system? View answer

Asked 5 ´years ago

Question 44

Can polyurethane be applied over this product? View answer

Asked 5 ´years ago

Question 45

We have an old workbench that is now our kitchen island. It gives us slivers. Would this be a good solution that is safe with food? How long does it last? Thanks! View answer

Asked 5 ´years ago

Question 46

I applied 2 coats yesterday and then used rags to remove excess oil. It is still drying. Would it help to buff with orbital buffer? View answer

Asked 5 ´years ago

Question 47

Hi -- do I have to machine sand a raw (naked) oak floor before applying Natural Oils Wax Finish? View answer

Asked 5 ´years ago

Question 48

We just built a butcher block table out of an old piece of a bar top which has a strong paraffin odor. We have used mineral oil and a lavender essential oil to reduce the odor. It helped a little but not enough to enjoy the table in the house. Will this product keep that odor under wraps? View answer

Asked 5 ´years ago

Question 49

How to apply? View answer

Asked 5 ´years ago

Question 50

Can I use this on an unsealed wood floor? View answer

Asked 5 ´years ago

SAMPLE - AFM SafeCoat, Naturals Oil Wax Finish Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic