Question 1

I already have Kahrs engineered flooring in my home, I want to do the floor in another room but think the flooring color may not be available. My previous flooring was, Oak Chene, silk matt lacquer. Do you know which product might be compatible to this? Thank you. View answer

Asked 3 ´years ago

Question 2

How would a beach house installation stand up, given people say the flooring scratches easily? Our floors get a lot of sand brought in, especially by the kids and dogs. View answer

Asked 1 ´year ago

Question 3

I'm not afraid of colour. My walls are mint green and gray on top. Any suggestions for colours of click flooring? View answer

Asked 1 ´year ago

Question 4

Hi! I read about the presence of 1-methyl 2-pyrrolidinone in the greenguard certification sheet which may cause reproductive harm. Is it present in the PET stain/finish in the wood cork flooring? Also, what are the ingredients of SRT finish? We will be installing cork floor by removing the old carpets. Do we need an underlayment? View answer

Asked 4 ´years ago

Question 5

I am planning on using this to seal my unfinished stone floors. Is there a product you recommend cleaning with before applying the sealer? View answer

Asked 4 ´years ago

Question 6

Can you use this paint on outdoor concrete? View answer

Asked 6 ´years ago

Question 7

I need 400 yards of carpet (Dolomite) and want to know how much Enertia padding I need? Thx View answer

Asked 1 ´year ago

Question 8

can this be used on food surfaces like a wood kitchen island top? View answer

Asked 3 ´years ago

Question 9

Hi- I usually buy only non toxic furniture but recently bought a small table made of mdf and veneer. I do chemical sensitivities so I can't do off gassing. What product in specific can I use to seal in the voc�s such as formaldehyde? One table I bought is white and the other is a mirrored glass table bottom (that probably has wood on the inside). I deal with chronic illness so the air quality is of utmost importance. Please let me know! View answer

Asked 6 ´years ago

Question 10

How soft is this rug? I have a crawling baby and really want something chemical free but also soft enough for bare skin. View answer

Asked 4 ´years ago

Question 11

I have old Marmoleum that mildewed in areas from water. Is the newer Marmoleum that sensitive? View answer

Asked 5 ´years ago

Question 12

Could this be used on a previously painted outdoor wooden (cedar) children's playhouse? I don't want to affect the color of the paint already on there. If not, what would you recommend instead? View answer

Asked 1 ´year ago

Question 13

I am looking for a similar product to seal an indoor desk. I want to make sure it's prop 65 safe. What would you recommend? View answer

Asked 5 ´years ago

Question 14

Hi, does this product help reseal linoleum? The surface of my linoleum floor got damaged from a too alkaline cleaning product, could this product (or any other) help reseal the surface to avoid the linoleum deteriorating and emitting VOCs. Thanks! Nicole View answer

Asked 2 ´years ago

Question 15

Hi, I'm wondering if this product could be used to protect from off-gassing from a linoleum floor? The finish has worn off due to faulty cleaning, and is now off-gassing. we'd prefer to not change the floor entirely. Would this or another product help seal the off-gassing, and could it be used on organic materials such as linoleum? (don't want to risk microbial growth). Thanks a lot! View answer

Asked 2 ´years ago

Question 16

Can I float this floor instead of glue down or nail down? View answer

Asked 2 ´years ago

Question 17

How do you clean this flooring? View answer

Asked 4 ´years ago

Question 18

Does Richlite make a matching jointing colour adhesive for all their colours? View answer

Asked 5 ´years ago

Question 19

Can this product be used on both already painted and non painted galvanized metal? I want to paint some galvanized metal pipes. some of the metal pieces are non-painted and some of them already have paint. Can I use this product to prime both the painted and non painted pieces before applying AFM Zero VOC paint? View answer

Asked 4 ´years ago

Question 20

Can the clear version of this product be tinted with pigment powder? I want to use a very specific color. View answer

Asked 5 ´years ago

Question 21

can you this product on outside siding ? View answer

Asked 2 ´years ago

Question 22

For unfinished hardwood floors do I need to use the bioshield penetrating oil sealer before using this wax or can I skip the sealer? Also, can i use a minwax stain prior to the wax? View answer

Asked 5 ´years ago

Question 23

I have a table that needs finished. It�s rough cut Douglas fir. It is an outdoor table and will always be outdoors. I don't want to change the color. I do not intend to sand the table. Can it be applied to the table as is or will some prep work need to be done? View answer

Asked 5 ´years ago

Question 24

I stained a wooden bowl with oil base stain. Can I use this product to make it food safe ? View answer

Asked 2 ´years ago

Question 25

I was told you no longer have Chemlink Durasil. Is this correct? What is the substitute? I want to caulk between the bathtub and the wall also. View answer

Asked 5 ´years ago

Question 26

I recently bought a board game organizer and it�s made of High Density Fibrewood (HDF). It has low amount of formaldehyde and I want to seal it for protection from that as well as a nice finish. I read the finish is sticky. Not sure that would be ideal. I want the finish product to be clear and hardened. But this is particle board the safe seal is my only choice? View answer

Asked 4 ´years ago

Question 27

Like Minwax or Varathane oil based polyurethane, does this gel up after storage, even in airtight paint cans? I am assuming not since it is in a jug with what appears to be an air tight cover. Is this water based? View answer

Asked 10 ´months ago

Question 28

Are the EcoStar Empire shake tiles similar to the Brava shake tiles? View answer

Asked 3 ´months ago

Question 29

what is the expected life of the caulk in place? View answer

Asked 4 ´years ago

Question 30

I want to paint the brick on the inside of my living room fireplace. It was suggested that I use a high heat type of paint. However, I don't want to use something that may give off toxic gasses if a future owner wants to use the fireplace. What SafeCoat solution would you suggest? View answer

Asked 5 ´years ago

Question 31

I'm searching for a non-toxic wallpaper adhesive - anyone know of a product? View answer

Asked 4 ´years ago

Question 32

What's the best wax for painted decks? View answer

Asked 5 ´years ago

Question 33

I have pantry shelves made of particle board that are painted with an oil based paint. They still offgas after 20 years. What can I do? View answer

Asked 1 ´year ago

Question 34

Can this adhesive be used on top of a concrete sealer? We would like to protect our newly poured concrete slab in the basement until we are ready to install linoleum in some rooms, which might be a couple years from now. View answer

Asked 6 ´years ago

Question 35

Can this be used on Kitchen counters? View answer

Asked 4 ´years ago

Question 36

Cork DekWall. Just so I get this right�they�re tiles? You have to buy adhesive? Are they difficult to remove/mar the wall if removed? View answer

Asked 1 ´year ago

Question 37

I make charcuterie boards, would this be ok to use as a sealant on top, it's will have different cheeses arranged on top of board? View answer

Asked 4 ´years ago

Question 38

Will I have to tape plastic over the driveway next to the garage to keep the cleaner from working on the newly poured asphalt when I rinse it off? If so, what kind of tape should I use that will not be harmed by the cleaner? View answer

Asked 6 ´years ago

Question 39

Can be used on painted concrete block? View answer

Asked 6 ´years ago

Question 40

Would this be suitable for use on a Cedar beehive? View answer

Asked 4 ´years ago

Question 41

I am looking to replace carpet with cork for my retail store ..we do have high traffic all year ...which specific one is best for commercial? View answer

Asked 5 ´years ago

Question 42

What would be the best product to seal the brick wall in my kitchen? My kitchen was just remodeled and the interior wall in the kitchen is now all brick with a dark grey mortar, and I am constantly wiping off the counters along with brick dust. I am not sure if it matters but it is thin brick 5/8" thick. View answer

Asked 5 ´years ago

Question 43

I have a hardwood ladder, totally unfinished/unstained. I want to finish or varnish it safely for indoor use, and am very chemically sensitive. Don't have a preference for discoloration or anything. Would this be the right product for this? View answer

Asked 5 ´years ago

Question 44

Can this be used on particle board? I'm installing cabinets in my home with portable board bottoms and sides will this waterproof it or should I use something else View answer

Asked 3 ´years ago

Question 45

Is there a grayish color available? View answer

Asked 1 ´year ago

Question 46

Okay here we go i want to make my own pattern on a vinyl floor! On every cut you make you always have a Cicero you can't use and up with a lot of scraps I want a glue to put pieces of scraps together that can handle foot traffic? View answer

Asked 5 ´years ago

Question 47

Can I use this product on Sauna Concrete floor that has a temperature close to 250F when Sauna is in use? View answer

Asked 5 ´years ago

Question 48

We are having our varnished solid wood cabinets sanded, primed and painted. I have previously oiled them. Our contractor said we need a high bond primer. Would any of the AFM Safecoat primers work? The paint will be water based, probably AFM Safecoat. Which paint would you recommend also? View answer

Asked 4 ´years ago

Question 49

How do you get wrinkles out of vapor shield? View answer

Asked 2 ´years ago

Question 50

If I would like a less stain look, what would I wipe the excess stain off with, water or mineral spirits? View answer

Asked 1 ´year ago

Browse by Topic