is it removable without damage to the existing surface? View answer
Asked 2 ´years ago
can this be used on honed travertine tile? View answer
Asked 2 ´years ago
Does your cork come in square tiles? View answer
Asked 2 ´years ago | Cork Flooring
Can I use this under hardwood floors? View answer
Asked 2 ´years ago
Is there a minimum order size for your wool wall to wall carpets? View answer
Asked 2 ´years ago
I have MCS and we are having no-VOC cabinets fabricated for our laundry room, which will be painted using AFM Safecoat. Should the PureBond plywood and solid wood be primed before painting with Safecoat? Would semi-gloss be best for laundry room cabinets? I have been buying safe products from Green Building Supply for years. I can't thank you enough for selling safe, no-VOC products. They are a real life-saver. Keep up the great work! View answer
Asked 2 ´years ago
The installation guide indicates the countertop will expand and contract, possibly up to 1/2 inch. Does that mean we should leave a gap between the edge of the countertop and a rigid structure such as a fixed wall? For a 36"x72" slab, would it expand in both directions equally or might it be less in say the long direction vs the short? Would the 1.5" thickness be prone to significant expansion as well? View answer
Asked 2 ´years ago | Cabinets & Countertops
Is there a way to see the color choices? View answer
Asked 2 ´years ago
Can this rubber gripper be use under the sisal carpet? View answer
Asked 2 ´years ago
is forbo adhesive L910W GOOD FOR FORBO TACBOARD ? View answer
Asked 2 ´years ago
Loving this product so far. However, I'm confused on what's the best protocol for sanding. I've heard that before applying oils/sealers, it's best to sand a little, as it 'roughs up' the surface a bit to allow for better oil penetration. Is this true? Also, on the official "Technical Information and Application" PDF for this product, it states "For best absorbency, all surfaces should be sanded NO FINER than #100". But this leaves the surface fairly rough - can I not sand it more finely, creating a smoother wood surface? Thanks a bunch! View answer
Asked 2 ´years ago
If I just want to preserve the appearance of the exterior of my redwood garden boxes and not concern myself with preserving the interior, could I just use this product and not need to put the AFM Safecoat Dynoseal on the interior? Do I need to be concerned with this product leaching any chemicals into the soil without the interior coating? View answer
Asked 2 ´years ago
Can I keep the brochures from the sample box? View answer
Asked 2 ´years ago
Are you able to keep brochures from the sample box? View answer
Asked 2 ´years ago
Will this work on Terra cotta planter pots to seal them ? View answer
Asked 2 ´years ago
Can woodwise be used on laminate flooring? View answer
Asked 2 ´years ago
Do you have a thickness more than 1" or panels wider? View answer
Asked 2 ´years ago
How would you apply this to the full length of existing ductwork? View answer
Asked 2 ´years ago
how much extra tile should you order? View answer
Asked 2 ´years ago
Delivery weight of 10x12 wool area rug? View answer
Asked 2 ´years ago
Do I have to use an underlayment on top of a concrete floor ? View answer
Asked 2 ´years ago
Is New Wallboard Primecoat suitable as a base layer for primer? View answer
Asked 2 ´years ago
Can this be used in a graywater system? View answer
Asked 2 ´years ago
Can this be used in a graywater system? View answer
Asked 2 ´years ago
Can these cork tiles be used to cover a painted brick fireplace? View answer
Asked 2 ´years ago
Must it be sanded between coats or can that part be left out??? View answer
Asked 2 ´years ago
Can this be installed in a bathroom for flooring? View answer
Asked 2 ´years ago
Can this cork wall tile be used on ceilings? View answer
Asked 2 ´years ago
can i use this to glue laminate flooring stairs? View answer
Asked 2 ´years ago
