Question 1

Hi -- do I have to machine sand a raw (naked) oak floor before applying Natural Oils Wax Finish? View answer

Asked 4 ´years ago

Question 2

Want to paint plastic canisters. Needs too not leach though. Need for food storage. Soiry. Is there a safe paint??? View answer

Asked 4 ´years ago

Question 3

I would love to use marmoleum in my kitchen and laundry room. I'd like to know if it can be cut/laid in a traditional black and white diamond shaped pattern? View answer

Asked 5 ´years ago

Question 4

Are there qualified installers in Minnesota, I assume this has to be installed perfectly? View answer

Asked 5 ´years ago

Question 5

Can I use AFM Safecoat to apply glass to wood base? To be used outdoors. View answer

Asked 5 ´years ago

Question 6

We have a 1820 home and our bedroom has wide plank pine floor that 25 years ago were coated with a water based poly . Can we use this product on it? View answer

Asked 4 ´years ago

Question 7

Hi! I'm working on making my own candle containers out of a mix of plasters, would this work to seal the inside of the container to make it non-porous? is it heat resistant? how high of a temperature can resist? thanks! View answer

Asked 5 ´years ago

Question 8

I am looking to put down cork in my attic space that will serve as my yoga/meditation space and have a few questions:1) Is underlayment recommended if cork is going over plywood?2) Do you currently have the Wicanders Whim Go Cork in stock? I'd need about 500sf.3) I'm also looking at icork's 12mm natural cork floor (3mm top cork layer over 6mm hdf over 3mm cork underlayment). I like the Wicanders name but like the thicker product. Any comments on this? View answer

Asked 4 ´years ago

Question 9

What is the high temperature for storing if not being used right away? View answer

Asked 2 ´years ago

Question 10

Can this product be sprayed on like a catalyst product? View answer

Asked 5 ´years ago

Question 11

What type of wood is top layer? View answer

Asked 1 ´year ago

Question 12

we want to put it on our ceiling in 4 season room -480 sq. feet - can it be painted? we would like to put panels up and divided into 4'4' sq. with mahogany beams =? View answer

Asked 4 ´years ago

Question 13

Hi! I'm working on making coasters out of plaster, would this work to seal them? Is it heat/water-resistant? thanks! View answer

Asked 2 ´years ago

Question 14

Would any of your products be appropriate to adhere concrete blocks for an organic raised vegetable garden? View answer

Asked 7 ´months ago

Question 15

Is this suitable for sealing in lead based paint? If not, do you have a product recommendation? View answer

Asked 3 ´years ago

Question 16

Does Polyureseal contain aluminum? What does it use as a drier/hardener? View answer

Asked 4 ´years ago

Question 17

What is the difference between the pure and the natural Rubio Monocoat? View answer

Asked 3 ´years ago

Question 18

Can this be used on a wood dining table? View answer

Asked 5 ´years ago

Question 19

Do you have a definitive date in November of when this product will be in? Can it be used with granite counters to seal around the sink? Do you know if it will stain the granite or turn it yellow? View answer

Asked 4 ´years ago

Question 20

Can the almighty adhesive be used for stone (granite) countertop seams? View answer

Asked 4 ´years ago

Question 21

Can this be used as an adhesive for granite countertop seams? View answer

Asked 3 ´years ago

Question 22

Is this paint safe to use around pet birds? View answer

Asked 8 ´months ago

Question 23

Is there a natural or safe coat matte sealer for slate? Looking for the natural stone look with no gloss. View answer

Asked 6 ´years ago

Question 24

I want to use it for my island only and your smallest offered is 48" x 96" which is twice what I need. Is there any way to order a 48" x 60"? View answer

Asked 2 ´years ago

Question 25

I have a tile bathroom that has two coats of clear epoxy. It looks grungy and it is already yellowing. Will this product adhere to the epoxy? View answer

Asked 5 ´years ago

Question 26

I'm making cement candle vessels, is it safe to use this to seal the inside of my vessel to prevent seepage? View answer

Asked 4 ´years ago

Question 27

We have an old house with an outdoor patio with both terracotta and limestone tiles. Is there any single product you have that could be used to seal both? And if not, which for each? View answer

Asked 1 ´year ago

Question 28

Thinking of using Rubio Monocoat on raw ponderosa pine. I need to stain to match Knotty Alder doors that I finished with the penetrating oil with wax. Turned out beautiful but darker than expected. Does the pine need to be pre conditioned to control the grain and which color would best match? View answer

Asked 5 ´years ago

Question 29

I used Safecoat oil wax finish on my raw knotty alder doors that turned out beautiful but darker than expected. I want to oil additional raw ponderosa pine but the oil doesn't turn out dark enough. Is there any way to add some color to the oil to try to match the pine? I have tried samples of your other stains on the wood to try to match the doors, but nothing is the right color. Any ideas? The pine is really light color. View answer

Asked 5 ´years ago

Question 30

Is there a fire rating for this product? View answer

Asked 1 ´year ago

Question 31

Would this product be safe to use on a wooden house I will be setting outside for my feral cats? I am looking for no/low VOC;no harsh chemicals; UV protection; non toxic to wildlife View answer

Asked 6 ´years ago

Question 32

AFM SafeCoat, WaterShield Item #1016 - we want to seal an interior brick wall to prevent it from shedding dust from the mortar. Will this (or another product) perform this? View answer

Asked 4 ´years ago

Question 33

We used concrete paint for our basement floor, what can we put over it to seal it so that it doesn't scuff up? Afm poly bp says it's for wood and the concrete sealers I see on here are for the raw floor, not to be applied once painted. View answer

Asked 4 ´years ago

Question 34

Can this go over the afm concrete floor paint to help prevent water and scuffs? View answer

Asked 4 ´years ago

Question 35

I plan to sand some of the top finish from my dining room table (because of light scratches), what product could I use to put a new top layer of finish/gloss on since I do not know what was originally on it? I don't know if it was an oil or water based product that was originally on the table when I bought it 15 years ago. I see the warnings not to use a water based product if the top coat was originally oil based, but I have no way to tell what is on it, so what can I use in that situation? Thank you! View answer

Asked 4 ´years ago

Question 36

The product sheet says this will cure over a 2 week period. This means you can't walk on your floors for 2 weeks? I was considering refinishing my stairs, but don't have another staircase to use while this cures. Any suggestions? View answer

Asked 4 ´years ago

Question 37

Must the floor be dried after damp mop cleaning? View answer

Asked 4 ´years ago

Question 38

I am installing click loc Marmoleum flooring in a shed on slab construction. I have already installed 6 mil vapor barrier and an OSB subfloor to provide more cushion/insulation. I want an underlayment that doesn't have a vapor barrier that could trap any potential moisture between layers as the 6 mil is underneath. Is this the right product? View answer

Asked 2 ´years ago

Question 39

How long is it until you can put furniture on the waxed floor? (This will not be the floor�s first coat of wax, so it will be a thin layer and buffing with an electric buffer, if it makes a difference) View answer

Asked 5 ´years ago

Question 40

I realize a different product would be best for butcher block, but I already have this product and have no other use for it. Is it food safe? Can I use it on my counters? View answer

Asked 4 ´years ago

Question 41

How does this differ from the bioshield paste wax? (Besides, obviously, the consistency) View answer

Asked 5 ´years ago

Question 42

Hi There, I am considering repainting my existing laminate countertops. If I am not cutting on this product, is it okay to use it on countertops? I'm specifically wondering about scratches or durability, and heat resistance (i.e. setting a hot pan on the surface). Thank you! View answer

Asked 4 ´years ago

Question 43

Can the paint be used for windows? View answer

Asked 2 ´years ago

Question 44

Is this safe to use if my wife is pregnant? View answer

Asked 4 ´years ago

Question 45

I am looking to seal painted countertops that have a light acrylic coating on them now. Should I lightly sand and then use Polyureseal-gloss solo and/or add the acrylac on top? Thank you in advance! View answer

Asked 5 ´years ago

Question 46

Does this lacquer dry into a � clear � plastic � look like resins do? View answer

Asked 4 ´years ago

Question 47

Can these planks arranged in a diagonal or herringbone pattern? Will cutting the row-end pieces at a diagonal affect durability or integrity? View answer

Asked 3 ´years ago

Question 48

Does it need to be glued on? Moved into an apartment I wanted to put on top that can be easily removed when I go. it's for a yoga/dance room and was considering click tile or impact wood roll but love this if possible. Thanks :) View answer

Asked 6 ´years ago

Question 49

Can this be used to seal 3/8� stone tile and the grout? I have almost a full gallon leftover from another project and am hoping to use it here. Thank you. View answer

Asked 4 ´years ago

Question 50

Would this sealer need to be reapplied after a period of years, or is it essentially permanent? (Our application would be a vanity in a small, half bath - to stop off gassing from the mdf/ particle board.) Thx. View answer

Asked 5 ´years ago

Browse by Topic