SAMPLE - AFM Safecoat, EXT Exterior Polyureseal Clear, Satin Q&A

Question 1

Hi, I'm looking for a clear coat to go over my deck stained with Ben Moore water based Arborcoat. Will this work? View answer

Asked 4 ´years ago

Question 2

What do I use to seal pressure treated wood on my deck? View answer

Asked 6 ´years ago

Question 3

I am looking for a low-voc sealer to use on a swing set that is prestained cedar - would this work? Is there a better option? View answer

Asked 5 ´years ago

Question 4

I have indoor wooden planters that I'm going to sand and want to stain and seal so watering the herbs doesn't rot the wood. What's the best product for this? View answer

Asked 3 ´years ago

Question 5

Is this the Best Safecoat Product to seal an Indoor Concrete Floor Slab to protect against Moisture Intrusion via the Concrete Floor Slab before applying a Vinyl sheet & then installing new Cork Floor Panels? Or is there a better Safecoat Product for protecting Moisture Intrusion underneath a Vinyl Liner beneath new Cork Flooring Tiles that will be installed 'Floating' & NOT Glued. View answer

Asked 2 ´years ago

Question 6

How many ounces is a sample size? And just to be sure, can this be used over painted wood? View answer

Asked 2 ´years ago

Question 7

Can safecoat ext be applied over west systems epoxy? View answer

Asked 6 ´years ago

Question 8

If I am coating a set of indoor steps (SPF lumber, 2 inch thick), do I need to coat the underside as well to prevent warping? Seasonal cabin, unheated in winter. View answer

Asked 5 ´years ago

Question 9

Is this safe to use on my veggie garden bed wood boxes to help seal out moisture and dirt? Thanks! View answer

Asked 3 ´years ago

Question 10

How long does each coat take to dry on outdoor porches? Gloss finish View answer

Asked 3 ´years ago

Question 11

Hi, I'm making concrete candle jars and I'm wondering if this product is safe to use for sealing the inside of the jar where the candle will be burning?Thank you View answer

Asked 4 ´years ago

Question 12

will it work over real milk paint products? View answer

Asked 2 ´years ago

Question 13

Hello! I purchased a sample of this in satin and I love it but it's too shiny for a project I'm working on. Could you recommend another product that will seal wood (outdoors) that has a matte/flat finish? View answer

Asked 4 ´years ago

Question 14

Can I use this for interior? The casement window I want to finish is both interior and exterior when opened. View answer

Asked 6 ´years ago

Question 15

Would this work on a rabbit hutch made of Cypress Fir that is already lightly painted? View answer

Asked 5 ´years ago

Question 16

Would this protect homemade fishing lures made of abs plastic with a fish scale texture and painted with acrylic paints? I need a thick outer shell that will be waterproof and hold up to rocks and fish strikes. View answer

Asked 5 ´years ago

Question 17

Do you have any stores in central Wisconsin that sells your products ? View answer

Asked 4 ´years ago

Question 18

Would this work on air drying clay pots as a sealer? The clay pots can't get wet when they dry, So would this make them waterproof? View answer

Asked 6 ´years ago

Question 19

I purchased the Bioshield Stain Finish in Indigo for my cypress porch swing, I am done with staining it and it turned out absolutely beautiful by the way. I want to add sealant on this, since it is outside. I do not want it real shiny or slick, just a coat to protect mostly keep my stain beautiful. Do I go with the safecoat EXT Satin only or use the safecoat EXT gloss first then the satin? Thank you in advance. View answer

Asked 5 ´years ago

Question 20

Can this product be sprayed on? Or do you have to apply it by hand? View answer

Asked 5 ´years ago

Question 21

Can this be applied on a porch over your all purpose exterior satin paint? View answer

Asked 2 ´years ago

Question 22

I just received a stone top outdoor dining table that needs to be sealed. Would this product work well for that purpose? View answer

Asked 4 ´years ago

Question 23

Under the "Features and Benefits" for the Ext. Polyureseal, it says that to get the satin finish you have to apply the gloss finish as a first coat, then the satin finish for a final satin finish. Is this correct? I need to buy both finishes? View answer

Asked 2 ´years ago

Question 24

Hello. will this product penetrate outdoor hardwood (Philippine mahogany- Meranti wood)? View answer

Asked 6 ´years ago

Question 25

The best clear finish for a the interior of a wood window that's in a shower. it's up high, and will be protected with a curtain but still need a durable waterproof finish. I'm assuming exterior Polyureseal might be the choice. Will that work or does anyone have a better recommendation? View answer

Asked 2 ´years ago

Question 26

Can this be used to seal an outdoor wooden fence? View answer

Asked 5 ´years ago

Question 27

Hi! I'm wondering if I can use this with cement vessels. Is it safe when heated? Does it give off any fumes or chemicals when in contact with heat/flame? View answer

Asked 4 ´years ago

Question 28

What is the products cured heat tolerance? Can it be within an inch of a candle flame? View answer

Asked 4 ´years ago

Question 29

My cedar siding was treated with an oil based/rosin based product called Penofin. I did not realize how toxic it is. We've cleaned the siding according to that product makers suggestion and I would like to seal it now to stop any residual off gassing of the Penofin and stop the strong cedar smell from my siding. Sounds like I would have to strip the Penofin completely before I use this product? Do you sell an exterior sealer that I could use on top of the remaining Penofin? View answer

Asked 2 ´years ago

Question 30

Can i use this to seal concrete candle jars? If so how meaning do i mix this with water?id like to roll it in a bucket or do i need to paint on and not dilute? Is this safe to use with wax that will get hot once melted. Thanks. View answer

Asked 3 ´years ago

Question 31

After how many years should I expect to have to re-apply to a deck in Austin, Texas? View answer

Asked 5 ´years ago

Question 32

Is this product tested on animals or does it contain animal or insect products? View answer

Asked 5 ´years ago

Question 33

I have a wooden table that I use outside on my balcony. I recently painted it with a relatively thick coat of acrylic paint and covered it with Rustoleum Triple Thick Gloss, then realized that is not really safe for a table. Would this work well to go over that top coat on a table that lives outside to protect from weather and be safe enough to eat off of (using plates, of course)? View answer

Asked 5 ´years ago

Question 34

Can I use this seal over chalk paint? View answer

Asked 6 ´years ago

Question 35

Is it flammable? View answer

Asked 5 ´years ago

Question 36

Will this darken concrete? View answer

Asked 4 ´years ago

Question 37

Ok, I understand this is out of design, But, I want to use this over the top of adhesive floor tiles that are asbestos or the glue under them are. I will be covering it all with vinyl plank flooring.. will this work to seal these in? View answer

Asked 5 ´years ago

Question 38

Good Afternoon, Mr. Goj, I want to paint the interior of a terracotta pot to seal it with the AFM Safecoat DynoSeal (dark color). After decoupaging the exterior of the pot, I want to seal it with the AFM Polyureseal EXT Satin (clear color). Is there a certain temperature range, they should be applied? And a level of humidity? I was going to apply indoors, if it was safe. it's been raining and a little cooler, outdoors. I purchased the samples, and will probably be buying the regular size at some point. I thank you so much for your time. Have a Merry Christmas and a Happy and Blessed New Year. View answer

Asked 4 ´years ago

Question 39

Does AFM Polyureseal EXT Satin have to be applied in a well ventilated area? View answer

Asked 4 ´years ago

Question 40

I'm thinking of using this product to finish coat a canvas covered boat. The boat bottom will be submerged for up to 6 hours at a time... then taken out of the water... can this finish handle that kind of use? View answer

Asked 5 ´years ago

Question 41

Is there a product that is recommended to either paint or seal pine wood being used to make a cover for a cast iron radiator? Something that will withstand the heat from the radiator and keep the wood from warping ? View answer

Asked 5 ´years ago

Question 42

Would this product be good for old barn beams that will be used for outside benches? View answer

Asked 6 ´years ago

Question 43

Can this product be used over wood treated with linseed or tung oil? View answer

Asked 3 ´years ago

Question 44

What is the best product for sealing MDO panels so VOCs are reduced/not released into a chicken coop? View answer

Asked 5 ´years ago

Question 45

Hi! I'm building 2 raised self watering cedar garden beds and would like to know if this product would be good for sealing it? I'm looking for something that will dry clear and be food safe. Thanks! View answer

Asked 6 ´years ago

Question 46

Would this be useable on a bonded stone statue to be placed outside year-round? We get some rain/snow but not torrents (in MD). View answer

Asked 5 ´years ago

Question 47

I sealed my house 2 years ago with the AFM Safe Coat Natural Penetrating Oil; now that most of that oil is weathered away, could I use this product & expect a longer lasting finish? View answer

Asked 6 ´years ago

Question 48

can this be used for sealing aquariums/ vivariums (plywood) and to seal painted foam (backgrounds)? View answer

Asked 6 ´years ago

Question 49

Is this product tested to be free of PFAS? View answer

Asked 3 ´years ago

Question 50

Does this product have off gassing during the curing process? Is it safe near animals? View answer

Asked 5 ´years ago

SAMPLE - AFM Safecoat, EXT Exterior Polyureseal Clear, Satin Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic