SAMPLE - AFM SafeCoat, Naturals Clear Penetrating Oil Q&A
Activity timeframe
Can this product (AFM SafeCoat, Naturals Clear Penetrating Oil) be used to reapply over wood that was previously treated with a penetrating oil stain applied three-four years ago? (It would be applied to an outdoor shed that the previous owner had treated, approximately 280 sq feet total surface area.) View answer
Asked 5 ´years ago
I just finished paneling a 10' x 14' room with knotty pine boards. I will be storing hunting clothes in the room so I don't want chemical smells tainting them. Which product would you most recommend and how many gallons do you think I'll need to cover all four walls (8' floor to ceiling)? Thank you. View answer
Asked 5 ´years ago
Would this work to seal a ceramic plate ? View answer
Asked 5 ´years ago
Hello , do you have anything to seal wood stain (non toxic )? View answer
Asked 4 ´years ago
Can this product be used on the inside of a wood raised bed garden? View answer
Asked 6 ´years ago
If I've been using mineral oil on my butcher block, would I need to deeply sand it for this to adhere? Or a light sanding? Would I need to use anything to dissolve the mineral oil? Would you recommend this or Bioshield Wood Counter finish in terms of longevity and having the oiliness not transfer to everything set on the counter (which is my problem now. Thanks! View answer
Asked 5 ´years ago
How long from application to use on a deck? View answer
Asked 6 ´years ago
Can this be used on a pressure treated wood (CCA) deck? View answer
Asked 4 ´years ago
Does this product change the color of the wood? View answer
Asked 6 ´years ago
We have a White Oak outdoor dining table that we just finished and are struggling with how to finish it. The person who built it suggested polyurethane for spar varnish. Our concerns are weather durability for hot sun and rain, food and drink spills, And we prefer a flat finish if possible. We live in California or the sun is hot! And we don't want to stress about water rings on the table... Would this be a good alternative to the options above? View answer
Asked 5 ´years ago
How long does a solid coat last outdoors? View answer
Asked 4 ´years ago
Does it get rid of termites? View answer
Asked 4 ´years ago
Is this the same type of oil in the Kahrs Satin Oil? View answer
Asked 5 ´years ago
Can this be used on already painted wood ? View answer
Asked 4 ´years ago
Is the finish shiny or matte? View answer
Asked 5 ´years ago
can this be used on either the walls or benches in a sauna? View answer
Asked 6 ´years ago
How heat resistant is this product? View answer
Asked 6 ´years ago
Does this work on stained wood? View answer
Asked 5 ´years ago
will this product be good for interior log home application? View answer
Asked 5 ´years ago
Last year we bought a finch pine picnic table with a clear coat finish. Since the table lives outdoors, we want to keep it well-protected by applying a fresh coat every spring. Is this the best product of yours to protect an exterior finch pine picnic table? Thank you. View answer
Asked 4 ´years ago
It says that it can only be frozen up to three times. I am wanting something like this product, but here is my project. I am converting a van into a camper, and so I am building wooden walls inside of it. I am wanting to seal it the wood, but there will be times when the van is parked in freezing temperatures. Since this product can only sustain 3 freezes, what is the best product for my van conversion project? It also must be mold resistant. THANK YOU! View answer
Asked 5 ´years ago
is this safe to spray a wooden bridge over water with wildlife ? View answer
Asked 5 ´years ago
