Concrete & Masonry Sealers Q&A
Activity timeframe
What is the sample size of this product? View answer
Asked 6 ´years ago
Can we use on concrete floor then put wood flooring or rug on it? View answer
Asked 5 ´years ago
Is this sealer Food safe? View answer
Asked 5 ´years ago
Can be used on painted concrete block? View answer
Asked 6 ´years ago
What would be the best product to seal the brick wall in my kitchen? My kitchen was just remodeled and the interior wall in the kitchen is now all brick with a dark grey mortar, and I am constantly wiping off the counters along with brick dust. I am not sure if it matters but it is thin brick 5/8" thick. View answer
Asked 5 ´years ago
I am considering putting down DynoSeal on a concrete slab, and then Quiet Walk, and then floating hardwood floors. I believe that DynoSeal is still tacky when cured. Will Quiet Walk work over the DynoSeal for this application? Secondly, will it be a problem if the concrete slab is quite cold, but the ambient temperature in the room is over 60 degrees? View answer
Asked 6 ´years ago
Would this work for polished white thassos marble kitchen backsplash? View answer
Asked 5 ´years ago
Can this product be used to seal exterior Belgard concrete pavers? View answer
Asked 5 ´years ago
Can this be rolled on? My tiler is planning to use a roller. View answer
Asked 2 ´years ago
Is this safe to use on my counters? I need a food safe sealant. View answer
Asked 5 ´years ago
Hi, we applied both the glossy sealers and the concrete sealer about 2 weeks ago. I just checked and clearly the glossy version worked when I poured water on it and pearls of water were forming. But the sealer did not look glossy at all. What could be the reasons, it was not glossy?The water on the penetrating version did not pearl. What could be the reasons the water did not pearl? Please advise Note: I was planning to use the concrete sealer in my garage and the glossy sealer in my artist studio. View answer
Asked 5 ´years ago
Is Mexeseal suitable for a garage floor? View answer
Asked 3 ´years ago
Hello, can this be used on plastic? I want to recycle some plastic planters I found and use them for my organic herbs and vegetables, but I'd like to coat the inside of the pots with this product so that none of the plastic chemicals leach into my soil. Can this product be used for that purpose? Thank you! View answer
Asked 5 ´years ago
can you use this product on an exposed aggregate concrete driveway? Also, will it darken the driveway? We notice when it rains and the water soaks in, the driveway appears a little browner which matches well with our stucco home. Once this soaks in, will it dry a little deeper? View answer
Asked 5 ´years ago
How soon after application can you buff? View answer
Asked 6 ´years ago
Can you use the sealer on existing sealed grout? View answer
Asked 5 ´years ago
can this be used on honed travertine tile? View answer
Asked 2 ´years ago
I bought a 1936 concrete home in Miami Florida in January in the dry season. The town has no storm drainage system( which I didn't know) and the property is in a flood zone. We are elevating the ground 18 inches with soil around the entire foundation, and grading a slow slope down away from the house. I want to waterproof the concrete foundation before we push the soil up against the house. What is the best material to use? I was told that an epoxy liquid would be good to coat on the foundation, but I have no idea if that's good. Thanks for any help you can provide. We don't have a basement, only a crawl space. View answer
Asked 5 ´years ago
What would you recommend for waterproofing below-grade concrete on a 1936 house in Florida? property floods about a foot. We are raising the soil 18" at house level, and slowly grading down away from the house. The concrete foundation is stucco and painted, so I don't know if Safecoat Dynoseal will work. Most materials seem to work on raw concrete only. Thanks for any help you can give. View answer
Asked 5 ´years ago
Can I find this locally in Port St Lucie, FL? View answer
Asked 4 ´years ago
Can it work on bathroom tiled? View answer
Asked 2 ´years ago
I have a concrete basement floor that has recently been painted with No Nonsense trade floor paint (I'm in the UK) - specs say it's solvent based satin and comes with all sorts of warnings re. carcinogens etc. Is there anything I can use to seal the floor to prevent off-gassing? View answer
Asked 2 ´years ago
I'd like to use this on untreated 4x4 pine posts that will have ground contact (maybe a few inches into the ground). The upper parts will be painted with white linseed oil paint. Can I use Safeguard Roof Coat to cover the black color of the Dynoseal at the bottom to help it match the white paint? View answer
Asked 2 ´years ago
Can I use this on a cement surface where I park my car? View answer
Asked 6 ´years ago
I have concrete block walls in my basement that have some sort of old dry loc type product on the block that's flaking off. Can this product be used as a sealer on the walls on top of the existing painted on dry loc that's flaking? Can I paint over this? I want to seal the block but also want something that won't hurt my birds or dogs on the floor above my basement. Or is there another product that would work better. View answer
Asked 4 ´years ago
Which sealer would work best to seal a slate tile bathroom floor? View answer
Asked 5 ´years ago
Our basement had mold in it, we have since corrected the problem and had the mold cleaned up. It was recommended that we seal the basement floor and walls to prevent excess water from entering the basement (exterior underground walls are already sealed). We have a home gym in the basement so are very concerned with respiratory health. What indoor concrete sealer would you recommend? and also plan on adding rubber flooring panels in the gym area. View answer
Asked 1 ´year ago
