Question 1

Someone recommended this to put over painted plywood walls instead of Hard Seal. What's the difference? Is this correct? I'm having bad VOC reactions to wood under the pain or the paint itself (or combo) and need to be able to seal everything that is painted already. View answer

Answer posted 5 years ago

Question 2

Would this work on terrazzo tile from the 70s that they put in bathrooms and entryways in older homes? View answer

Answer posted 5 years ago

Question 3

Can I use this to paint a crib? View answer

Answer posted 5 years ago

Question 4

The product that is used around the edges of roof is an ice dam protection - This product allows a nail to be pounded through the product and into the plywood - the product them condenses around the nail forming a seal Does roofing felt product do the same? View answer

Answer posted 5 years ago

Question 5

If caulk gets on my skin does it come off easily? View answer

Answer posted 5 years ago

Question 6

Can I use this on non waterproof Laminate flooring? View answer

Answer posted 5 years ago

Question 7

Is AFM Safecoat paint good for bathrooms? Or is one of the Ecos or Bioshield paints better for bathrooms? View answer

Answer posted 5 years ago

Question 8

What is the application process? View answer

Answer posted 5 years ago

Question 9

How many SQ ft does one box cover? View answer

Answer posted 5 years ago

Question 10

Would this be suitable for caulking metal roofing seams on an RV. How long would I expect it to last in this situation and how easy is it to scrape off and replace? View answer

Answer posted 5 years ago

Question 11

I have already installed a grout that does not contain Portland cement. What no or low VOC sealer do you recommend? I prefer no VOC. View answer

Answer posted 5 years ago

Question 12

Is there a single product food grade that both stain and seals for butcher block? View answer

Answer posted 5 years ago

Question 13

I have creaking wood floors that pop. Would this oil help to moisturize the wood that's already sealed? View answer

Answer posted 5 years ago

Question 14

What is the Janka hardness scale for the oak and maple options? View answer

Answer posted 5 years ago

Question 15

Hi there! We run a concrete pot business and were curious about how much 1 or 5 gallons would last? Does a little go a long way? View answer

Answer posted 5 years ago

Question 16

Can this product be used on wooden countertops? View answer

Answer posted 5 years ago

Question 17

Hi,I am chemically sensitive, and have use M1 a lot throughout the last few years, I love it. Looking for probably M1 would work the best I am thinking. For sealing around the bottom of my new HVAC Air Handler that is mounted on a return wood box. So it would be painted medal to Hardwood Plywood. Could I use Nova link 35 this time instead? Or, another eco friendly preferably No VOC? Thanks, Dale View answer

Answer posted 5 years ago

Question 18

Can this be used on the exterior of a concrete silo ? View answer

Answer posted 5 years ago

Question 19

What carriers do you use for delivery of the samples? View answer

Answer posted 5 years ago

Question 20

Can this also be used with 2in hook & loop sandpaper? I have a similar one that does, just looking for a few more. Thx. Jenn. Velcro Backer Pad Driver for Drill View answer

Answer posted 5 years ago

Question 21

Are your Bioshield Clay Paints available in white? View answer

Answer posted 5 years ago

Question 22

Does it need to be glued or nailed down? Or it can be installed like laminate..? View answer

Answer posted 5 years ago

Question 23

I was going to put on this paint today since it will be about 65, but it's going to be really dry out (20% humidity). Should I wait? View answer

Answer posted 5 years ago

Question 24

I want to paint an old fireplace hearth. Is this product opaque enough to fully block old deep set stains or do I need to first use a primer? View answer

Answer posted 5 years ago

Question 25

How long would I have to return this for a full refund? View answer

Answer posted 5 years ago

Question 26

Does the tint of the stain make the wood look painted? I have weathered cedar pickets--some are very grey. About 25 years ago, when I applied boiled linseed oil to aged-grey pickets, it brought out the natural grains without a painted look. However, I am opposed to using a toxic product. I am trying to figure out if I should use the PolyWhey in a brownish color or the waterproofer; the challenge is I don't want a painted look, but I also want to revive the aged-grey pickets and restore some natural color. Any suggestions? View answer

Answer posted 5 years ago

Question 27

If I use on a chair will it make clothing oily ? View answer

Answer posted 5 years ago

Question 28

Will this paint stripper be safe for fiberglass? View answer

Answer posted 5 years ago

Question 29

Hi would this be enough to cover a 12x24 foot deck? View answer

Answer posted 5 years ago

Question 30

Is this sticky? I read many reviews that this leaves your particle board very sticky. View answer

Answer posted 5 years ago

Question 31

We are converting our garage into an apartment. We need to seal the concrete floor with a sealer that is safe and durable. The apartment will have rabbits in it? Is this a good sealer for that? View answer

Answer posted 5 years ago

Question 32

Can this urinal be used with a septic system? View answer

Answer posted 5 years ago

Question 33

Is this your best product to remove paint from an outdoor deck? View answer

Answer posted 5 years ago

Question 34

I need to seal a painted crib, which product should I use to seal if we want a semi gloss or satin finished look? View answer

Answer posted 5 years ago

Question 35

We will leave our concrete slab exposed in our new home until we are ready to tile it in coming months. If we apply WaterShield or WaterStop now, will that adversely affect our ability to lay tile later? View answer

Answer posted 5 years ago

Question 36

I applied 2 coats yesterday and then used rags to remove excess oil. It is still drying. Would it help to buff with orbital buffer? View answer

Answer posted 5 years ago

Question 37

Can I apply this product on an unheated slab (inside)? Ambient and product temperature can be brought up to 70, but instant read thermometer shows 50 on the concrete itself. (Boiler for radiant heat is not yet installed). View answer

Answer posted 5 years ago

Question 38

do you add stain colors to your product. New Build tongue and groove yellow pine horse stalls? View answer

Answer posted 5 years ago

Question 39

Can this be used on ipe wood on deck? View answer

Answer posted 5 years ago

Question 40

Can I use it on a stone bench on the garden? View answer

Answer posted 5 years ago

Question 41

Does this product provide UV protection? View answer

Answer posted 5 years ago

Question 42

My cabinets are golden, raw plywood material, can I stain in white color? I don't want to paint them View answer

Answer posted 5 years ago

Question 43

Hi -- do I have to machine sand a raw (naked) oak floor before applying Natural Oils Wax Finish? View answer

Answer posted 5 years ago

Question 44

Can this be used on a concrete birdbath? View answer

Answer posted 5 years ago

Question 45

Easy to use? View answer

Answer posted 5 years ago

Question 46

I have a ledge made of lava stone (Cantera) which connects the waterfall to a Koi pond. Since the lava stone is porous, I was planning on using AFM SafeCoat on the lava stone. Would it be a safe choice considering it is carrying water into the koi pond? View answer

Answer posted 5 years ago

Question 47

I make flower boxes and garden planters and am looking for something that can coat like polyurethane but is safe to grow herbs and vegetables out of. Will this product help? View answer

Answer posted 5 years ago

Question 48

Wanted to use on brand new pressure treated lumber deck ...is ok? View answer

Answer posted 5 years ago

Question 49

Will this product work on multiple layers of acrylic base deck stain? View answer

Answer posted 5 years ago

Question 50

Can it be tinted? View answer

Answer posted 5 years ago

Browse by Topic