Question 1

I'm looking to get the toxic smell out of my kitchen cabinets, which are brand new. I'm not really looking to paint them since they are white and I love the color. Which products would be best to use with this process? I'm reading about the Polyureseal (satin and gloss). I believe the cabinets made from wood. View answer

Asked 6 ´years ago

Question 2

I'd like to redo the surface of my dining table because the paint is coming off. What product would I use if I sand the surface and then want an easily wipeable, non-toxic surface for toddlers to eat off of? View answer

Asked 6 ´years ago

Question 3

I am looking for a Safecoat stain to do a piece of furniture in cherry and they don't have cherry color. What do you think would work for that? View answer

Asked 6 ´years ago

Question 4

Where can I buy your environmentally-responsible Marmoleum cleaning products and wax? Have the products or ingredients been tested on animals? View answer

Asked 6 ´years ago

Question 5

What product is best for pressed wood or particle board that the edges gives splinters? View answer

Asked 4 ´years ago

Question 6

I want to seal my new laminate floors because I'm afraid of water spills might damage the floor. Will this product do the job? View answer

Asked 4 ´years ago

Question 7

Can this sealer be used on an interior wood shower wall that has been sanded? Does it provide a waterproof finish? View answer

Asked 5 ´years ago

Question 8

Can this product be used on sanded cedar walls inside a shower? Will it hold up when exposed to routine wetness and moisture? View answer

Asked 5 ´years ago

Question 9

I'm doing a project where i would like to do this in stages of .. 1) Seal with beeswax/tung oil mix. 2) Paint an image. 3) seal with your product. Is this possible? View answer

Asked 5 ´years ago

Question 10

I am wanting to use the bamboo product but have a farm sink and will need to cut into the product for the farm sink. Is the middle of the bamboo sheet solid? How do I seal it? Thank you. View answer

Asked 9 ´years ago

Question 11

Can I use it over vinyl flooring? View answer

Asked 5 ´years ago

Question 12

My client is asking for a non voc clear coat. Is this product considered low voc? View answer

Asked 7 ´months ago

Question 13

How does this work on laminate flooring? View answer

Asked 4 ´years ago

Question 14

Do you carry any products that block terpene emissions (i.e. the smell of pine, the smell of cedar)? View answer

Asked 5 ´years ago

Question 15

Can you use on laminate flooring? View answer

Asked 5 ´years ago

Question 16

What is the difference between AFM Polyureseal BP and AFM Safecoat Acrylacq? Which is better for using over Durotone stain for indoor furniture? View answer

Asked 4 ´years ago

Question 17

Can the SafeCoat Polyureseal BP be applied over a water-based urethane modified alkyd paint with the look and feel of an alkyd/oil finish? This is a hybrid type paint trying to intermix the benefits of oil and water-based products. Specifically, I am using Sherwin Williams Emerald Urethane Trim Enamel paint on bedroom furniture. It is water-based, but they explained to me that it is water encapsulating an oil to allow for easier application and clean-up, but what remains is the oil. So I'm wondering if I can use the Polyureseal BP over it? Thanks. View answer

Asked 4 ´years ago

Question 18

According to your website, the SafeCoat Polyureseal BP cannot be applied over oil-based polyurethanes or oil-based products. Does this include oil-based stain, such as Minwax? Wood Finish? 250 VOC Compliant, a penetrating oil-based wood stain? If so, are there stains that you would recommend instead? View answer

Asked 9 ´years ago

Question 19

I recently purchased SafeCoat wood stain and am very happy with it! However, when I went to apply the SafeCoat Polyureseal BP (satin finish) to the dining room table I have stained, on reading the directions it said that I HAD to use 1 or 2 coats of glossy finish Polyureseal first if I wanted to get a matte finish? Do I really need to order a glossy quart now, as well, in order to achieve a matte finish? What happens if I just use 2 to 3 coats of the satin finish? View answer

Asked 9 ´years ago

Question 20

I am installing T&G Douglas Fir flooring in a small (200 sq ft) hermitage. The cabin is located in an organic garden so I certainly want to use an environmentally friendly product. The cabin will not get a lot of foot traffic (200 sq ft doesn't allow for a lot of feet). I am trying to keep the cost down. Which of your products would you recommend? View answer

Asked 9 ´years ago

Question 21

Use On Material: Confusing. Can it be used on Bamboo and wood furniture? or **Do Not**? View answer

Asked 5 ´years ago

Question 22

Can I use this to seal newly painted cabinets? View answer

Asked 5 ´years ago

Question 23

Will this work on laminate flooring? View answer

Asked 4 ´years ago

Question 24

When you seal a butcher block counter with this product what should you use to clean it? View answer

Asked 5 ´years ago

Question 25

What's the drying time on AFM SafeCoat, Polyureseal BP? I have to do the oak, tongue and groove floor in largish sections, but we also have a dog and need something that dries quickly. View answer

Asked 1 ´year ago

Question 26

Painting kitchen floor tiles with a bonding primer then patio and floor paint. Is your sealer ok to cover and protect the job? No yellowing? View answer

Asked 5 ´years ago

Question 27

Can this product be sprayed? View answer

Asked 5 ´years ago

Question 28

Can I mix this with rubio monocoat quick wood filler? View answer

Asked 5 ´years ago

Question 29

can you apply this product over 100% acrylic paint? View answer

Asked 5 ´years ago

Question 30

Do you sell a product I can put over a new laminate type floor throughout my home to protect from dog urine. Im looking for a coating, not a cleaner? View answer

Asked 4 ´years ago

Question 31

Since this product can't be used on oil based poly, what should I use to seal the off gassing of the floors in my apartment? They were sealed with oil based poly 3 months ago. View answer

Asked 6 ´years ago

Question 32

I have willow sculptures (wooden branches) which are used as space separator. And I have to work next to them all day. By the end of the day I feel like I was eating them ) So would this finish help to seal everything (smell) coming from the branches? I do not want any smell from the seal itself , It should be really eco and safe. So do you think this polish would work for me? View answer

Asked 6 ´years ago

Question 33

Will this seal fake wood laminate? View answer

Asked 4 ´years ago

Question 34

Can I use this on engineered hardwood floor? View answer

Asked 4 ´years ago

Question 35

Can this be used on pergo? View answer

Asked 4 ´years ago

Question 36

Is it safe to use as a finish on a baby crib? View answer

Asked 5 ´years ago

Question 37

After the final coat, can you buff/polish with 3M ultra fine finishing pads? View answer

Asked 5 ´years ago

Question 38

Is this good for kitchen chairs? View answer

Asked 5 ´years ago

Question 39

Is there a product that can be put on polyurethane wood floors to protect you from off gassing? View answer

Asked 4 ´years ago

Question 40

I painted a play kitchen for my granddaughter with exterior paint (not realizing it has a higher VOC). Can I seal it with Poly BP to make it safer for her to play with and for us to keep in the house? View answer

Asked 3 ´years ago

Question 41

Can this be used on formica countertops? View answer

Asked 4 ´years ago

Question 42

Is this food grade safe? View answer

Asked 5 ´years ago

Question 43

Which product is recommended for Concrete countertops? View answer

Asked 3 ´years ago

Question 44

What about anti scratch, does this have the anti scratch in this product? View answer

Asked 4 ´years ago

Question 45

I am looking for a seal coat for my water based countertop paint? View answer

Asked 5 ´years ago

Question 46

Can this product be used for a vinyl plank floor ? View answer

Asked 4 ´years ago

Question 47

I installed some wood flooring about 1.5 years ago in a rental. Used low-grade plywood that I cut into planks and installed for a rustic look. The tenants have been complaining about urethane smell - and I started looking for a solution and found you guys. However, after more thinking/research I don't think it's the oil-based urethane that's the problem but possible off gassing of formaldehyde. I already have oil-based polyurethane on the floors - so I'm not sure which product you think might work best to seal over what's there and help protect against more off gassing. View answer

Asked 9 ´years ago

Question 48

Why can't I use this over Sherwin Williams paint? View answer

Asked 1 ´year ago

Question 49

Which is a higher gloss, pearl or eggshell? View answer

Asked 5 ´years ago

Question 50

hello would this paint be safe for changing the color of a bird cage? View answer

Asked 5 ´years ago

Browse by Topic