Question 1

Is this product food safe to spray terracotta pots to display produce? View answer

Asked 1 ´year ago

Question 2

can one mix two 2 stain colors to create a custom mix like "clear" and "charcoal?" View answer

Asked 5 ´years ago

Question 3

Is the container plastic? Not very Earth friendly. Wish you packaged in metal cans. View answer

Asked 7 ´years ago

Question 4

What's best to seal 3/4 plywood that got wet that's non toxic and will seal the subfloor before installing laminate flooring? View answer

Asked 1 ´year ago

Question 5

is this safe to spray a wooden bridge over water with wildlife ? View answer

Asked 5 ´years ago

Question 6

How well does this product work with cork floors? How does it hold up with expanding and contracting floors? Any tips for application? View answer

Asked 5 ´years ago

Question 7

We are using interior plywood as a temporary floor in our yurt. Do we need to seal both sides of the sheet? The interior plywood we will use as a temp floor sits on a platform of exterior plywood and will be covered with the interior plywood, do we need to seal the exterior plywood of the platform too? View answer

Asked 6 ´years ago

Question 8

Hi! I am Remodeling our tiled bathroom and I have already finished priming and painting all of the tile and I'm looking for an all natural water-based polyurethane (or whatever you can recommend) to clear coat the tile?Thank you! View answer

Asked 5 ´years ago

Question 9

Building new wood boat would this work on the inside? What would happen if submerged for awhile? View answer

Asked 5 ´years ago

Question 10

Hi There! I'm looking for a no/low VOC (preferably) water based product that has UV protection for wood that I color with aniline dye. I'm not sure if this product has UV resistant components in it's formula. If not, can you recommend a product that dries clear or transparent to let the color pop through? Thank you! View answer

Asked 7 ´years ago

Question 11

Is your product recommended for a butcher block countertop? View answer

Asked 6 ´years ago

Question 12

Can this be used over MDF furniture? View answer

Asked 4 ´years ago

Question 13

I have a teak veneered dining table that has a fresh coat of teak oil on it. The directions on the can say that I can finish over it after 72 hours drying time. Can I use your product or should I stick to an oil based urethane? View answer

Asked 3 ´years ago

Question 14

I need to seal in the off gassing from an IKEA particle board kitchen cabinet that's got melamine foil on the outside and plastic edging. Would this product be the best or would another product work better? It also needs to be durable and provide a waterproof barrier against atmospheric moisture (it's in an RV) and water spills from the sink that's above it. Mold and mildew protection in addition would be ideal. Thank you. View answer

Asked 3 ´years ago

Question 15

What is the process of re-treating the deck in approximately 4-6 years after applying Deck Revive the first time? Do you simply add another coat of Deck Revive or does the old need to be removed first? View answer

Asked 6 ´years ago

Question 16

Is this product effective in applying to paper mache? I am working on a sculptural mural and I'd like go know if this liquid will suffice or if it will harm the delicate paper mache surface. View answer

Asked 6 ´years ago

Question 17

Hi, I'm looking for a clear coat to go over my deck stained with Ben Moore water based Arborcoat. Will this work? View answer

Asked 4 ´years ago

Question 18

Hello. I'm painting 2 small plastic/resin deck boxes to match them and want to seal them. Would this product work or any suggestions? Thanks! View answer

Asked 6 ´years ago

Question 19

Can this be used on butcher block countertops or would you recommend another of your products? So far they have been sanded and the only products used are Howards butcher block conditioner and cutting board oil, which is just a food grade mineral oil. View answer

Asked 5 ´years ago

Question 20

How long will this last in an outside application before needing to be reapplied? View answer

Asked 7 ´years ago

Question 21

Can I use this ONLY on the outside of a raised cedar vegetable garden bed? The inside would remain raw cedar. Would there be issues with soil moisture being trapped in the cedar boards this way? View answer

Asked 6 ´years ago

Question 22

Hi! I'm working on a large art project utilizing around 300 dried roses. I would like to find a product that is able to seal and provide a little extra strength to the flowers. I have experimented with a few materials so far and liked to results that came from using a polymer resin but I did not like the glossy finish. Looking online, it is difficult to find any resins that will provide the same strength without high gloss (I am looking for a no-gloss, clear finish). Do you have any products available that you would suggest? I appreciate any input! Thank you! View answer

Asked 6 ´years ago

Question 23

I am a cabinet maker and looking for a lacquer substitute that is more environmentally friendly. This seems like a good fit. Is there a line/brand of stains that work well with this product or will any non oil based stain work? Going non oil based drastically reduces selection in stain/finish products but it's a move I'm looking to make for my business. Also. Is this available in 5gal? View answer

Asked 6 ´years ago

Question 24

Is it safe for cups and mugs? View answer

Asked 7 ´years ago

Question 25

We just put down Mohawk laminate flooring but it's not the H?�O type. We are worried we may spill or our puppy may have an accident on it. What product could I use on it to make it somewhat waterproof? View answer

Asked 5 ´years ago

Question 26

Can this product be my finished coat as well? View answer

Asked 5 ´years ago

Question 27

Can AFM SafeCoat, Polyureseal BP be used over modpodge ? View answer

Asked 5 ´years ago

Question 28

Can this be used for interiors? View answer

Asked 5 ´years ago

Question 29

I have a heated concrete floor and am currently undergoing a kitchen remodel. After the cabinets are in, I'd like to spruce up the floor with something that will make the floor look great (it's been 12 years since anyone has done anything to it) but that is eco friendly. Is this the product for me? View answer

Asked 4 ´years ago

Question 30

Does this have uv protection? View answer

Asked 4 ´years ago

Question 31

Does this glaze have any UV inhibitors in it for exterior use? View answer

Asked 5 ´years ago

Question 32

Can this product be applied over previously finished flooring? Engineered hardwood with some shine to it. View answer

Asked 3 ´years ago

Question 33

Does this product block/encapsulate off-gassing (if used on particle board or plywood, for example)? View answer

Asked 3 ´years ago

Question 34

Does this contain formaldehyde? View answer

Asked 3 ´years ago

Question 35

what is best method to apply to floor? View answer

Asked 3 ´years ago

Question 36

Will this darken 100 year old white oak floors? View answer

Asked 3 ´years ago

Question 37

I've used the Rubio Monocoat Oil on my floors but an evening of I can use this? It's been a year since I last oiled and I'm looking for a more durable, lower maintenance finish. View answer

Asked 2 ´years ago

Question 38

What top coat would this product be compatible with (water based, oil based, etc.)? View answer

Asked 3 ´years ago

Question 39

Can this product be applied over engineered hardwood? View answer

Asked 3 ´years ago

Question 40

How do you remove brush strokes from the final coat? View answer

Asked 3 ´years ago

Question 41

Could you use this over a decoupaged floor over vinyl? I want to put tissue paper over existing vinyl with Mod Podge and then seal. Thank you. View answer

Asked 3 ´years ago

Question 42

This comes as an 8 ounce sample? How many square feet does that cover? And are all your liquid samples 8 ounces? View answer

Asked 4 ´years ago

Question 43

how long before I can walk on it? View answer

Asked 3 ´years ago

Question 44

You state that the area must be climate controlled before, during and after installation. For an RV/Fifth Wheel would it not be sufficient to keep the interior AC running continuously to provide that temperature, or does the external side (bottom) of the vehicle floor also need to be at that temperature? I'm wondering why I would need to keep my RV in a climate controlled garage before/during/after the process. View answer

Asked 6 ´years ago

Question 45

Can this go over sheet vinyl? View answer

Asked 4 ´years ago

Question 46

Can you use this adhesive to glue plywood to concrete? View answer

Asked 4 ´years ago

Question 47

I have a floor that is likely asbestos that I would like to cover. Some tiles are missing, and the black adhesive (cutback?) is exposed. Will your 1195 product adhere in this situation, and can it be used as a skim coat/leveler for the missing tiles? View answer

Asked 6 ´years ago

Question 48

Can this adhesive be used with store-bought LVT (Luxury Vinyl Tile) faux wood planks? I've already bought the planks, but I'd like to limit the indoor air toxicity in my home by using a non-toxic adhesive for it. Will this product be okay to use for LVT? Thanks. View answer

Asked 7 ´years ago

Question 49

Is this product tested on animals? View answer

Asked 6 ´years ago

Question 50

ECOS' website states the filler powder must be sealed with their filler sealer before priming and painting. Your description of the filler powder does not mention this. Does the filler powder need to be sealed with filler sealer before priming? View answer

Asked 5 ´years ago

Browse by Topic