Question 1

Hi, what are the ingredients in this product? Thanks View answer

Asked 1 ´year ago

Question 2

What is the main ingredient of this caulk? The only thing I could find on the MSDS is Amino Silane View answer

Asked 6 ´years ago

Question 3

Does this contain mildewcides and/or any isothiazolinones? Please confirm. View answer

Asked 4 ´years ago

Question 4

Hi! I'm working on a large art project utilizing around 300 dried roses. I would like to find a product that is able to seal and provide a little extra strength to the flowers. I have experimented with a few materials so far and liked to results that came from using a polymer resin but I did not like the glossy finish. Looking online, it is difficult to find any resins that will provide the same strength without high gloss (I am looking for a no-gloss, clear finish). Do you have any products available that you would suggest? I appreciate any input! Thank you! View answer

Asked 6 ´years ago

Question 5

I am a cabinet maker and looking for a lacquer substitute that is more environmentally friendly. This seems like a good fit. Is there a line/brand of stains that work well with this product or will any non oil based stain work? Going non oil based drastically reduces selection in stain/finish products but it's a move I'm looking to make for my business. Also. Is this available in 5gal? View answer

Asked 5 ´years ago

Question 6

Is it safe for cups and mugs? View answer

Asked 6 ´years ago

Question 7

We just put down Mohawk laminate flooring but it's not the H?�O type. We are worried we may spill or our puppy may have an accident on it. What product could I use on it to make it somewhat waterproof? View answer

Asked 5 ´years ago

Question 8

And, do recommend sanding the deck first, or scrub-clean? View answer

Asked 4 ´years ago

Question 9

Can this product be my finished coat as well? View answer

Asked 4 ´years ago

Question 10

What's the difference between a sheen and a gloss in your product? Which shines the wood more? View answer

Asked 5 ´years ago

Question 11

Can AFM SafeCoat, Polyureseal BP be used over modpodge ? View answer

Asked 5 ´years ago

Question 12

I have a heated concrete floor and am currently undergoing a kitchen remodel. After the cabinets are in, I'd like to spruce up the floor with something that will make the floor look great (it's been 12 years since anyone has done anything to it) but that is eco friendly. Is this the product for me? View answer

Asked 3 ´years ago

Question 13

I have a dining table that is butcher block. I would like to stain it darker but not sure what product would be good for a table that is food safe for my young kids. Can you suggest a stain for butcher block table? View answer

Asked 9 ´months ago

Question 14

Does this glaze have any UV inhibitors in it for exterior use? View answer

Asked 5 ´years ago

Question 15

Does this contain formaldehyde? View answer

Asked 3 ´years ago

Question 16

what is best method to apply to floor? View answer

Asked 3 ´years ago

Question 17

Is there a compatible stain to use under this product on hardwood floor? View answer

Asked 1 ´year ago

Question 18

Can this poly whey floor finish be used on outdoor deck floors? View answer

Asked 1 ´year ago

Question 19

what size is a "sample" of safecoat sealant? View answer

Asked 9 ´months ago

Question 20

Is there any vapor barrier that would work over safecoat concrete paint? View answer

Asked 10 ´months ago

Question 21

Must it be sanded between coats or can that part be left out??? View answer

Asked 2 ´years ago

Question 22

I've used the Rubio Monocoat Oil on my floors but an evening of I can use this? It's been a year since I last oiled and I'm looking for a more durable, lower maintenance finish. View answer

Asked 1 ´year ago

Question 23

What top coat would this product be compatible with (water based, oil based, etc.)? View answer

Asked 3 ´years ago

Question 24

Can this product be applied over engineered hardwood? View answer

Asked 2 ´years ago

Question 25

How do you remove brush strokes from the final coat? View answer

Asked 3 ´years ago

Question 26

Could you use this over a decoupaged floor over vinyl? I want to put tissue paper over existing vinyl with Mod Podge and then seal. Thank you. View answer

Asked 3 ´years ago

Question 27

I) I will use this for unfinished red oak. Are these steps correct? 1. 220 grit sanding 2. Apply first coat 3. 220 grit slightly sand again4. Apply second coat 5. Wait for over 24 hours 6. Apply third coat) How often do I have to coat again?III) How long can I keep the leftover?IV) Can I return the unopened gallon? View answer

Asked 10 ´months ago

Question 28

Can I use this over start railing that was stained with an oil-based stain several years ago? How long is this product good for once it's been opened? View answer

Asked 11 ´months ago

Question 29

Does this need a wood conditioner or water mist before applying to poplar cabinets? View answer

Asked 1 ´year ago

Question 30

We have a subfloor made up of mdf and plywood. Which product should I use to seal it if installing vinyl plank flooring over it? View answer

Asked 9 ´months ago

Question 31

Have a mobile home with mdf flooring throughout. Best sealer, mold resistant, waterproof, encapsulation, formaldehyde blocker? View answer

Asked 9 ´months ago

Question 32

Can one person walk on the floor two days after applied ? View answer

Asked 1 ´year ago

Question 33

how long before I can walk on it? View answer

Asked 3 ´years ago

Question 34

Maintenance data sheet did not indicate proper cleaning instructions. What type of cleaner is recommended and/or not advised?? View answer

Asked 2 ´years ago

Question 35

How do a get glue smears off of the marmoleum linoleum tile? View answer

Asked 2 ´years ago

Question 36

It should be allowed to dry before installing Marmoleum? View answer

Asked 11 ´months ago

Question 37

You state that the area must be climate controlled before, during and after installation. For an RV/Fifth Wheel would it not be sufficient to keep the interior AC running continuously to provide that temperature, or does the external side (bottom) of the vehicle floor also need to be at that temperature? I'm wondering why I would need to keep my RV in a climate controlled garage before/during/after the process. View answer

Asked 5 ´years ago

Question 38

What is the best way to clean off squeeze out residue? View answer

Asked 3 ´years ago

Question 39

It's put in wet correct? No set up time? View answer

Asked 4 ´years ago

Question 40

Can you use this adhesive to glue plywood to concrete? View answer

Asked 4 ´years ago

Question 41

I have a floor that is likely asbestos that I would like to cover. Some tiles are missing, and the black adhesive (cutback?) is exposed. Will your 1195 product adhere in this situation, and can it be used as a skim coat/leveler for the missing tiles? View answer

Asked 6 ´years ago

Question 42

Is there a way to get a sample of the glue to test it? I have MSC and I need to test the glue. A gallon is just so large. View answer

Asked 5 ´years ago

Question 43

Can this adhesive be used with store-bought LVT (Luxury Vinyl Tile) faux wood planks? I've already bought the planks, but I'd like to limit the indoor air toxicity in my home by using a non-toxic adhesive for it. Will this product be okay to use for LVT? Thanks. View answer

Asked 6 ´years ago

Question 44

Is this product tested on animals? View answer

Asked 6 ´years ago

Question 45

ECOS' website states the filler powder must be sealed with their filler sealer before priming and painting. Your description of the filler powder does not mention this. Does the filler powder need to be sealed with filler sealer before priming? View answer

Asked 4 ´years ago

Question 46

I still have a bucket of the DriTac 5800. As it's no longer the right choice for the Cork Wall Tile, what can I use it on? (I'm not seeing the DriTac 5800 online anymore) View answer

Asked 2 ´years ago

Question 47

Can this product be used to bond Advantech subflooring to floor materials? Advantech is impregnated with resin and paraffin wax, and says it can only be used with solvent or urethane-based adhesives. View answer

Asked 1 ´year ago

Question 48

Does this product contain Formaldehyde? View answer

Asked 2 ´years ago

Question 49

How is this adhesive chemically sensitive safe if it contains antimicrobials? What type of antimicrobial does it contain? View answer

Asked 2 ´years ago

Question 50

Does this product come in other sizes? View answer

Asked 4 ´years ago

Browse by Topic