Question 1

Can this product be used as an adhesive for Formica? View answer

Asked 5 ´years ago

Question 2

Do you have the oxidized copper cynch Lock in 12 x 12? View answer

Asked 4 ´years ago

Question 3

You have any pictures of the cotton white on pine? View answer

Asked 4 ´years ago

Question 4

I want to restore some old, neglected garden stick tools (shovels, rakes etc.) I plan to thoroughly de-rust the metal with an electrolysis tank and a Scotch-Brite scrub. I would then like to recoat with rust-inhibiting, abrasion resistant products that won't contaminate my soil when they inevitably do wear off. Does this product fit my needs? What about a top coat recommendation? View answer

Asked 4 ´years ago

Question 5

How much does a 200 ft roll off silicone vapor shield weigh? View answer

Asked 2 ´years ago

Question 6

I'm using M-1 adhesive to attach heat cable clips to asphalt shingles. Our daytime temps are 40-50F. Night temps are 15-30F. We have rain/snow in the forecast. Can I apply M-1 during the day when 40-50F if the temps will be below freezing at night and with rain/snow expected in the following day or two? View answer

Asked 10 ´months ago

Question 7

We just installed kahrs, oak sand, matte lacquer woodlock 5g, can I use this cleaner on our new hardwood flooring? View answer

Asked 3 ´months ago

Question 8

I am wanting to purchase some hardwood flooring from kahrs, im looking at a few that are on sale. Are you able to confirm with me before we make our final decision and order the hardwood we like, if we can order all the floor base trim and transition pieces ? I am currently ordering samples and should come to a decision within a day or 2 once the samples are delivered.. thanks Renee View answer

Asked 1 ´year ago

Question 9

Is your Linseed Oil Boiled or Cold Pressed/Raw? View answer

Asked 5 ´years ago

Question 10

Would this work to adhere a few inches of linoleum flooring that is curling up? View answer

Asked 5 ´years ago

Question 11

I am looking to seal an area around a HVAC vent where asbestos (possibly) tiles have cracked. The tiles have been covered with plywood and laminate flooring, but since the cracked tiles are around the floor vent opening, I want to seal the edges. Will this product work for that? View answer

Asked 5 ´years ago

Question 12

I am looking for an alternative to Sculpt or Coat. I am a professional fine artist who sculpts with paper. I need something to make paper durable, stiff or somewhat stiff. And ?not yellow.? View answer

Asked 4 ´years ago

Question 13

If the black mold can NOT be removed & the wall/ wood floor is inundated with it. Will this product still kill the mold and stop it from reproducing? (we would clean best we can) View answer

Asked 4 ´years ago

Question 14

Can this be used on T1 11 wood? View answer

Asked 5 ´years ago

Question 15

I was just wondering if this product would work for sealing crackle tile? it's supposed to be sealed before grouting so the grout doesn't get into the cracks and discolor the tile. I have to be sure it's not going to allow that to happen. View answer

Asked 6 ´years ago

Question 16

I ordered samples and love this carpet. When I showed my installer he said it would not work on stairs (I think he said it was due to the thick backing). Can this be installed on stairs? Is there any special consideration for stair application? I can find another installer if needed. Thanks! View answer

Asked 5 ´years ago

Question 17

Hi. I'm looking an adhesive for hand-tufted wool carpet, zero voc. Can you recommend any? View answer

Asked 4 ´years ago

Question 18

Hello, I am interested in this product. Like many people here, I've recently refinished some rooms in my house with an oil based poly and the smell still isn't gone. I'd like to finish the rest with this product, but I'm worried about it not matching the rest of the floors. I have 100- year-old red oak that's being sanded and refinished. Will this finish give the floors a similar look in terms of color, to a classic poly finish? Thank you! View answer

Asked 6 ´years ago

Question 19

I have a porch roof that is a radius on the corners ( think a quarter of a turret). Are the panels solid material or webbed on the back as we would need to cut the panes to taper towards the top? View answer

Asked 2 ´years ago

Question 20

What coloration process is used for the Earth Weave wool ? View answer

Asked 5 ´years ago

Question 21

Can I apply this on the stovetop cutting board I made ? View answer

Asked 5 ´years ago

Question 22

Can I use this on a concrete cutting board? If not what can I use instead ? View answer

Asked 5 ´years ago

Question 23

hello, tom with Siena cabinets here� in las Vegas, NV.�re: acrylacq:1st we spray gloss coat, then we wait 4 hrs. then we� we��then sand like a sanding sealer with 320 grit?� �then top coat�with satin and let dry for 4 more hrs. or overnight and this is complete? View answer

Asked 3 ´months ago

Question 24

Based on info on <a href="http://greenbuildingsupply.com," target="_blank">greenbuildingsupply.com,</a> the marmoleum click cinch loc product is probably the best format of Marmoleum for my 1918 house. I'm interested in trying a �harlequin� (checkerboard set on an angle) pattern. My potential installer says that this pattern might be difficult with the click cinch loc format. Is that true? View answer

Asked 6 ´months ago

Question 25

To what extent do the colors change with exposure to light�and are the samples in the sample kit �mature� in this regard? I'm looking at a photo on this website of a checkerboard kitchen floor made from Caribbean and Barbados and I want exactly that look�but unlike that photo, the 1-1/2 inch samples in Forbo�s sample books show these as almost identical tones. View answer

Asked 6 ´months ago

Question 26

I see that Click Marmo is now waterproof. Is that also true of sheet fresco? (Please say �yes.� Pretty pleeeease) View answer

Asked 6 ´months ago

Question 27

What is the difference between Item #12758, Forbo Marmoleum Fresco-Sheet, and Item #133868, Forbo Marmoleum Composite Sheet? They seem to have the same colors. View answer

Asked 5 ´months ago

Question 28

Could you compare BioShield Herbal Oil and AFM Safecoat Naturals Clear Penetrating Oil�why might I prefer one over the other? And does one of them �amber� the wood more than the other? I'm considering something for a new butcher block countertop which will have food on it�but I would like to tone down the appearance if possible. View answer

Asked 6 ´months ago

Question 29

I'm looking to lay the Waterproof Cork flooring in a basement that is currently not leveled. I'm assuming that the floor will need to be leveled. Are there best options for leveling for the flooring that I am considering? View answer

Asked 5 ´years ago

Question 30

How is the wood look achieved on the waterproof cork tiles? Is this screen printed? If yes, then is it durable? View answer

Asked 5 ´years ago

Question 31

I have T111 in my basement and want to seal it? Do any of your products prevent the off gassing from T111 and pressure treated 2 x 4s? View answer

Asked 4 ´years ago

Question 32

Can I use this as a sound barrier between the insulation and plywood in my walls and ceiling? I can't find another non-toxic option. View answer

Asked 2 ´years ago

Question 33

Can I use this as an adhesive to glue wood paneling on my ceiling? I'm looking for something that can glue and be great sound-dampening View answer

Asked 2 ´years ago

Question 34

Can I use this on furniture? I don't like any of the colors offered for the furniture Linoleum, would it be possible to use the flooring one instead on top of a desk? View answer

Asked 2 ´years ago

Question 35

Will this change the color on new wood? View answer

Asked 5 ´years ago

Question 36

What type of maintenance and cleaning products do you recommend after this product is applied? View answer

Asked 5 ´years ago

Question 37

I want to design art craft table for kids�I was wondering if this seal would safe and hold up to toddler messes and daily cleaning? Also would this be safe over hand made toy blocks for toddlers that may put part of block in mouth from time to time? View answer

Asked 3 ´years ago

Question 38

Can I use this primer as a substitute for paint? I would like to repaint my white ceilings. It doesn't seem economical to use primer and then use white paint. Which one do I need and which can I do without? View answer

Asked 4 ´years ago

Question 39

Can deck revive be used on railings and spindles? View answer

Asked 5 ´years ago

Question 40

My standard poodle sleeps at our heads and stretches in her sleep, which causes scratches on our wall paint since we don't have a headboard. Would this prevent scratches and chipping of our wall? View answer

Asked 4 ´years ago

Question 41

What is the safest product for sealing birdhouses, Vermont Natural Coatings or ARM Safecoat? View answer

Asked 7 ´months ago

Question 42

Does this require transition seams at a certain expanse? View answer

Asked 5 ´years ago

Question 43

Can the ECOS Exterior Satin paint be used with this product? View answer

Asked 5 ´years ago

Question 44

For sealing granite, I see you don't carry Aqua Mix Sealer's Choice Gold as they use microban which is an antimicrobial. Would you recommend this product as an alternative as I see they don't use microbes (Aqua Mix Penetrating Sealer-non VOC formula). Would this work for sealing granite countertops in a kitchen? View answer

Asked 6 ´years ago

Question 45

Hi! I am looking for safe wood colored stain f(gray or brown) or my raised bed garden made of pine. Can you help? View answer

Asked 4 ´years ago

Question 46

I purchased this product to apply over LifeProof Rigid Core Liguria flooring. The product doesn't seem to be adhering. Any thoughts? View answer

Asked 2 ´years ago

Question 47

I am looking for something safer than epoxy to seal tumbler cups, would this be an option? View answer

Asked 6 ´years ago

Question 48

Can Almighty Adhesive be used like Phenoseal to close a gap in a formica countertop? View answer

Asked 3 ´years ago

Question 49

How would I apply this on stairs, including also skirt board, mantle shoe mold and bannister? If I don't have a buffer, what process and what tools would I need? View answer

Asked 3 ´years ago

Question 50

does one roll cover 136 square feet for the price listed? View answer

Asked 3 ´years ago

Browse by Topic