Waterproof Click - Floating Q&A
Activity timeframe
cost for sheet 12' x 12' with a thin pad? View answer
Asked 11 ´months ago
Will professionally applied pesticides harm Marmoleum? View answer
Asked 2 ´years ago
I'm interested in this product but curious if you can install over existing sheet vinyl. We have original sheet vinyl over 3/4 inch plywood subfloor which has some deflection. Is it advisable to put down a thicker underlayment on top first? We actually had LVT installed over the sheet vinyl with grout but the grout started to crumble immediately. So we have to start over. I�d prefer this product since it�s also non toxic. But want to make sure it�ll hold up on our existing floors. Thank you! View answer
Asked 6 ´years ago
Is this renter-friendly? View answer
Asked 1 ´year ago
What is the delivery time for click lock in Los Angeles? View answer
Asked 2 ´years ago
Can I install this floor over existing porcelain tile? View answer
Asked 2 ´years ago
I want to use the Marmoleum on a three season porch that is up on Sonotubes. The current substrate is plywood over which an old indoor/outdoor carpet had been laid. We will rip up the carpet and use the plywood underneath. Is there a concern about the fact that the porch is three season and open underneath by about a foot or so? The room is enclosed with large sliding glass doors. View answer
Asked 4 ´years ago
can this marmoleum floor be damaged by dog nails and cat claws? View answer
Asked 3 ´years ago
Do all the natural linoleum flooring have a cork backing? View answer
Asked 2 ´years ago
Is this floor 100 percent waterproof? View answer
Asked 3 ´years ago
Can this tile be laid over ceramic floor? View answer
Asked 4 ´years ago
delays in shipping due to COVID? View answer
Asked 5 ´years ago
My wife and I are about ready to make the marmoleum click purchase, I think, haha...watched all the install videos, checked out images, etc etc...My question for today is, when you put the little spacer chips at the edges of walls in during the install-and lets fast fwd to the job being all done, do you REMOVE those spacers, and set in your baseboard/trim/bullnose/whatever you're finishing the edges with? or do those spacers need to stay in?? I ask because, with it being a FLOATING FLOOR, if I remove the spacers, could the floor shift? View answer
Asked 4 ´years ago
Can I seal the seams between the tiles? I purchased the 12x12 marmoleum click tiles for my powder room and have already had a small leak that soaked below the tiles. I had to pull them all out to dry. Is there a way to seal the seams between the tiles so water cannot get between them? Thanks! View answer
Asked 4 ´years ago
Where are you located? View answer
Asked 2 ´years ago
Can Marmoleum Click Loc Tile be installed in the bathroom? View answer
Asked 4 ´years ago
Do you have the oxidized copper cynch Lock in 12 x 12? View answer
Asked 4 ´years ago
Based on info on <a href="http://greenbuildingsupply.com," target="_blank">greenbuildingsupply.com,</a> the marmoleum click cinch loc product is probably the best format of Marmoleum for my 1918 house. I'm interested in trying a �harlequin� (checkerboard set on an angle) pattern. My potential installer says that this pattern might be difficult with the click cinch loc format. Is that true? View answer
Asked 6 ´months ago
To what extent do the colors change with exposure to light�and are the samples in the sample kit �mature� in this regard? I'm looking at a photo on this website of a checkerboard kitchen floor made from Caribbean and Barbados and I want exactly that look�but unlike that photo, the 1-1/2 inch samples in Forbo�s sample books show these as almost identical tones. View answer
Asked 6 ´months ago
Do you install floors for consumers? View answer
Asked 2 ´years ago
Can I install 12x12 click cinch lock on the diagonal? View answer
Asked 3 ´years ago
Does sunlight exposure affect flooring ? View answer
Asked 4 ´years ago
I am interested in the Marmoleum planks. I will be installing it over a wood subfloor. My question concerns the density of the planks. In the room will be two steel production tables on casters that weigh about 500 lbs each. Do I need to be concerned about these planks dimpling under the weight of these tables? Also, will the planks stay flat and in place after repeated moving of the tables over time? View answer
Asked 5 ´years ago
How long is the $25 credit that comes with the sample box good for? View answer
Asked 6 ´years ago
If I pick a pattern that is on your site, can you tell me the amount of tile I would need to do that pattern? We have a new house we are moving into, and it will have 18" tile floors throughout. I was told if we use the underlayment, and did the clic tile as a floating floor we could go over the existing tile if it was new. Can the clic tiles be used in bathrooms for flooring? View answer
Asked 5 ´years ago
Can I return unopened boxes if I order too much? View answer
Asked 2 ´years ago
Would this work for a home gym with heavy equipment? View answer
Asked 5 ´years ago
Can this be used for under exercise bike to protect hardwood floor? View answer
Asked 2 ´years ago
Can this be used in outdoor screened in patios? View answer
Asked 5 ´years ago
