Question 1

have you used this product on yellow cedar and what were the results???? View answer

Answer posted 5 years ago

Question 2

Can I put this over the basement walls that already been painted with drylock? View answer

Answer posted 5 years ago

Question 3

I realize a different product would be best for butcher block, but I already have this product and have no other use for it. Is it food safe? Can I use it on my counters? View answer

Answer posted 5 years ago

Question 4

I'm debating between Cork Go, Cork Essence and CorkWISE. A big reason I'd like to try cork is that I deal with chronic lower leg and foot pain. Are there differences in how soft to the foot one of these is compared to the others? For example, does the waterproof-ness of the WISE make it harder to stand on than Go? Is Essence harder than Go or about the same? Will Go last as long as the others? Thank you! View answer

Answer posted 5 years ago

Question 5

does it have harmful chemicals like arsenic and other chemicals in treated wood? View answer

Answer posted 5 years ago

Question 6

Do you have MSDS for your products? I need it for interior design research. View answer

Answer posted 5 years ago

Question 7

My wife and I are about ready to make the marmoleum click purchase, I think, haha...watched all the install videos, checked out images, etc etc...My question for today is, when you put the little spacer chips at the edges of walls in during the install-and lets fast fwd to the job being all done, do you REMOVE those spacers, and set in your baseboard/trim/bullnose/whatever you're finishing the edges with? or do those spacers need to stay in?? I ask because, with it being a FLOATING FLOOR, if I remove the spacers, could the floor shift? View answer

Answer posted 5 years ago

Question 8

After how many years should I expect to have to re-apply to a deck in Austin, Texas? View answer

Answer posted 5 years ago

Question 9

how to switch Fahrenheit? View answer

Answer posted 5 years ago

Question 10

We are looking to seal our outdoor patio that seems to be eroding in spots. Is this as simple as applying with a roller brush, or do we need to do any prep before? View answer

Answer posted 5 years ago

Question 11

I am not sure how to use the BioShield Floor Milk. Do you mix with water to use as a cleaner or straight from the bottle as a floor finish? I have Marmoleum flooring that is more than 15 years old and looks like it could use a little restoration. View answer

Answer posted 5 years ago

Question 12

Do you no longer carry this in the blue with yellow? View answer

Answer posted 5 years ago

Question 13

Can this be a substitute for 3M 2084? View answer

Answer posted 5 years ago

Question 14

Are you able to make this an area carpet by binding the edges? View answer

Answer posted 5 years ago

Question 15

Hi! Can this be applied on terracotta clay pots? Not painted View answer

Answer posted 5 years ago

Question 16

Can your coating be used on 2x4 studs (pine, non-pressure treated) in a basement remodeling project to protect against dampness and water? View answer

Answer posted 5 years ago

Question 17

Do you sell a product I can put over a new laminate type floor throughout my home to protect from dog urine. Im looking for a coating, not a cleaner? View answer

Answer posted 5 years ago

Question 18

I believe I have to first make sure the water vapor is not high before using this product. Can I do this test with plastic with tape? Or do I need to do a more professional testing? View answer

Answer posted 5 years ago

Question 19

Which sealer would work best to seal a slate tile bathroom floor? View answer

Answer posted 5 years ago

Question 20

How big is your sample product? I would like to test before buying for my bar counter. View answer

Answer posted 5 years ago

Question 21

I have a latex allergy. Do you carry any rugs without it? View answer

Answer posted 5 years ago

Question 22

I have a wooden table that I use outside on my balcony. I recently painted it with a relatively thick coat of acrylic paint and covered it with Rustoleum Triple Thick Gloss, then realized that is not really safe for a table. Would this work well to go over that top coat on a table that lives outside to protect from weather and be safe enough to eat off of (using plates, of course)? View answer

Answer posted 5 years ago

Question 23

Will this product bond corian pieces together? View answer

Answer posted 5 years ago

Question 24

The installation guide recommends a glue-down installation in high-moisture situations and areas that get direct sunlight. I'm hoping to install this in a kitchen with a skylight, however there's already a glue down cork floor in the room (solid, fairly level, but surface is beyond repair). Can I install this cork floor as a glue-down on top of the existing cork floor? Or is it ok to float? If yes to gluing, what adhesive is best? Thanks! View answer

Answer posted 5 years ago

Question 25

Could this be installed in a checker pattern? View answer

Answer posted 5 years ago

Question 26

How wide are the planks and how many planks appear to be in a plank? View answer

Answer posted 5 years ago

Question 27

Can I get the free shipping on 185 ft2 to P7A 5Z7 Thunder Bay, Ontario Canada? Please LMK. Thx View answer

Answer posted 5 years ago | SAMPLE - Forbo Marmoleum Fresco - Sheet, Marigold

Question 28

Hi, can I use this as wallpaper adhesive for a non-woven paper based wallpaper and a wall with builder grade flat paint? Thank you! View answer

Answer posted 5 years ago

Question 29

Can I use this to glue pvc wall panel on bathroom ceiling? Panels are 3D so it is not flat. View answer

Answer posted 5 years ago

Question 30

Will this product work in basements with a seeping leak? View answer

Answer posted 5 years ago

Question 31

How do you clean this flooring? View answer

Answer posted 5 years ago

Question 32

Is this able to be used on a buffet table made of engineered wood and painted? View answer

Answer posted 5 years ago

Question 33

How will the elasticity and adhesion perform, as opposed to urethane such as Sikaflex1A when being used to air seal exterior stud bays prior to batt insulation? View answer

Answer posted 5 years ago

Question 34

how much does the 1.25X30X144 slab weigh? View answer

Answer posted 5 years ago

Question 35

What finish would you classify this,matte, semi-gloss,gloss? View answer

Answer posted 5 years ago

Question 36

How many ounces (or liters) is the sample size? View answer

Answer posted 5 years ago

Question 37

I live in Minnesota. What does it mean, Freeze/Thaw safe - No.AFM SafeCoat, DynoSeal Are you saying I can't coat the inside of my raised garden bed because it freezes really hard in MN. Think -20F? View answer

Answer posted 5 years ago

Question 38

Will this work on Ipe? View answer

Answer posted 5 years ago

Question 39

What are the ingredients? View answer

Answer posted 5 years ago

Question 40

How does this mix on plastic , will it do anything to plastic? View answer

Answer posted 5 years ago

Question 41

There was an unexpected rainstorm about 12 hours after applying the second coat, and now there are some water marks sealed into the finish. Would you recommend sanding it again and re-applying another coat? View answer

Answer posted 5 years ago

Question 42

Will it cover a painted wood outside table ? View answer

Answer posted 5 years ago

Question 43

Does this come in just clear for the outside of a raised cedar bed? View answer

Answer posted 5 years ago

Question 44

Will the paint stick to a metal fence? View answer

Answer posted 5 years ago

Question 45

Are any of your products safe to use on wood used to build a raised bed vegetable garden? View answer

Answer posted 5 years ago

Question 46

Can this adhesive be used for installation of rubber pavers to an outdoor concrete patio? View answer

Answer posted 5 years ago

Question 47

Is there an image on the site that shows how abrasive the on slip paint is? View answer

Answer posted 5 years ago

Question 48

Can this product be used on a 30 year old deck that has been stripped and sanded? View answer

Answer posted 5 years ago

Question 49

Replacing deck . Some joists are rotten on top up to 2 or 3 inches. Will this product fill rotten wood areas ? View answer

Answer posted 5 years ago

Question 50

can i apply to floor with a foam brush? View answer

Answer posted 5 years ago

Browse by Topic