Question 1

Hello can your clay paint be used in furniture? View answer

Answer posted 4 years ago

Question 2

is this mineral spirits? View answer

Answer posted 4 years ago

Question 3

From which country is the bamboo sourced? View answer

Answer posted 4 years ago

Question 4

I live in Arizona and my solid oak parquet floor has shrunk a little bit leaving small spaces between the 1x6 inch slats. The wood is finished with polyurethane. Can I use Hard Oil #9 or which products do you suggest to help seal these spaces? View answer

Answer posted 4 years ago

Question 5

How do you claim "no animal testing ever" in your brochure while your SDS states your LD50 Dermal and Oral were tested on rabbits and rats respectively? View answer

Answer posted 4 years ago

Question 6

Can this be sanded? View answer

Answer posted 4 years ago

Question 7

Can I use this on primed drywall? View answer

Answer posted 4 years ago

Question 8

I'm looking for a non toxic product that would produce a wet look to sculptured stone. For decorative purposes only. What do you recommend? View answer

Answer posted 4 years ago

Question 9

If I'm applying this outdoors, what amount of time should pass before any rain can fall onto the surface? View answer

Answer posted 4 years ago

Question 10

Is this particular color (Kyoto) in stock for 60 sq ft? View answer

Answer posted 4 years ago | SAMPLE - Forbo Marmoleum Real - Sheet, Golden Saffron

Question 11

Can you do a floating installation under a refrigerator and range? View answer

Answer posted 4 years ago

Question 12

Is AFM Safecoat Almighty suitable for installing a sheet of linoleum flooring in a breezeway? View answer

Answer posted 4 years ago

Question 13

Can I install a cork floor over laminate or vinyl? How would I do this? Thanks! View answer

Answer posted 4 years ago

Question 14

Hi there. I am a massage therapist and wondering if my massage table legs would damage these floors? Thank you. View answer

Answer posted 4 years ago

Question 15

Do you ship to Canada? I have lead paint on my basement concrete and the workers used Blue Bear Mastic cleaner which I thought was the wrong product and then Klean Strip in some spots and then Blue Bear Coating Remover which was what I thought they were using initially and worked the best by far. They used water wash in between the different products. It still smells very bad after a week even with negative air pressure machine. I'm very sensitive. Help? I think they need a degreaser to properly clean View answer

Answer posted 4 years ago

Question 16

I wish to seal the existing paint on an old door, I don't know what kind of paint is on it, what should I use? View answer

Answer posted 4 years ago

Question 17

Can I use this in a kitchen countertop? View answer

Answer posted 4 years ago

Question 18

I have a coat polyurethane over an accent wall... The "clear" polyurethane turned my walls yellow... Will this remove just the polyurethane or will it also ruined my paint job? View answer

Answer posted 4 years ago

Question 19

can I add this to Hemp Oil ? On the outside of wood structure? View answer

Answer posted 4 years ago

Question 20

Can you clean it with mop & bucket of cleaner with water? View answer

Answer posted 4 years ago

Question 21

I see that for a matte finish, the first coats should be gloss Acrylacq, followed by matte Acrylacq. Would it be okay to use gloss Acrylacq as the first coats, followed by a matte water based top coat of a different brand (General Finishes)? View answer

Answer posted 4 years ago

Question 22

Can this be used over ceramic tile flooring? View answer

Answer posted 4 years ago

Question 23

Is it all right to use AFM SafeCoat in the shower were it will get wet everyday? View answer

Answer posted 4 years ago

Question 24

I have latex stain on deck and want to apply oil stain. Would this work? View answer

Answer posted 4 years ago

Question 25

Can I purchase in a custom size as a runner? View answer

Answer posted 4 years ago

Question 26

Hello, I am looking for 12x12 tiles. All of them I see have a marbled look but I would rather flat colors. Does that exist?Thank you,Zephyr View answer

Answer posted 4 years ago

Question 27

What color is the primer? View answer

Answer posted 4 years ago

Question 28

can I use this on a faux tin tile ceiling? It is some kind of plastic, white with a fairly matte surface. View answer

Answer posted 4 years ago

Question 29

What does "changed on a daily basis" mean? When do the numbers change? View answer

Answer posted 4 years ago

Question 30

I am putting in a western red cedar tongue and groove ceiling in our campervan: approximately 6' wide and 10'long. How much might I need (wondering if I should get smaller cans vs. The larger ones) and is this the best product to use for this application? It will encounter moisture from cooking (although we do have fans) Thanks! View answer

Answer posted 4 years ago

Question 31

Comparing this product to American Clay. I love the look of American Clay but this seems a lot more affordable and simple to work with as as a DIYer. Is there a method to apply this that would look more like natural plaster? View answer

Answer posted 4 years ago

Question 32

Is it nsf approved? View answer

Answer posted 4 years ago

Question 33

I'm wanting to paint our kitchen hutch which was previously painted white with paint that was not non-toxic. What could I use to put a fresh coat of white over it? View answer

Answer posted 4 years ago

Question 34

We have minor damage to a small portion of drywall (some paper is missing). What Green Building supplies can I use for the repair? View answer

Answer posted 4 years ago

Question 35

Would this be safe for a birdcage? View answer

Answer posted 4 years ago

Question 36

I was advised to use oil-based Rustoleum to seal indoor wicker furniture. The fumes were horrific. Two months later there is still a toxic smell. Is there a SafeCoat or other non-toxic clear sealer I can spray over the Rustoleum coat to eliminate lock in the fumes and lock in the wicker material so it doesn't deteriorate? Thanks for your help, Vivian 07-07-21 View answer

Answer posted 4 years ago

Question 37

Would this product work on raw reclaimed lumber that will go in a shower/ laundry room. I want the wood sealed from moisture but don't want it shiny like poly would do. As long as it doesn't get moldy? View answer

Answer posted 4 years ago

Question 38

Can this be used on bathroom hardwood floors to protect against water/moisture? View answer

Answer posted 4 years ago

Question 39

I love, love, love this waterproof cork. Unfortunately someone dropped something really sharp on it and there is a tiny gouge in the surface--not even a divot, just a tiny bit of the surface was shaved off. What's the best product or method for repairing this? Color is Fashionable Grafite. If it were dark black I'd use a Sharpie, but this is a dark, soft gray. View answer

Answer posted 4 years ago

Question 40

Can I use AcriGlaze for sealing wood car siding for interior walls? View answer

Answer posted 4 years ago

Question 41

Hi - This seems to have a very high VOC content; is there anything about the Kahrs brand that makes it safer than alternatives? Is there any info on off gassing after it cures? View answer

Answer posted 4 years ago

Question 42

How do I order the Unique Carpets Somerset Sea Breeze? Also my room measures 15FT length and 9'5"width, what size do I order? View answer

Answer posted 4 years ago

Question 43

Can use this on painted milk jugs made into skulls? View answer

Answer posted 4 years ago

Question 44

What would you recommend for sealing the inside of a wooden reptile enclosure? View answer

Answer posted 4 years ago

Question 45

If the black mold can NOT be removed & the wall/ wood floor is inundated with it. Will this product still kill the mold and stop it from reproducing? (we would clean best we can) View answer

Answer posted 4 years ago

Question 46

Can you install this or the Click over linoleum? View answer

Answer posted 4 years ago

Question 47

I am building a campervan and I am planning on putting the foam and foil insulation (Smart Shield from Amazon) on the ceiling (aluminum). The insulation is the thin and flexible stuff that comes rolled, I need something that will instantly be able to hold it up or I don't know how I will get it to closely and evenly bond with the ceiling so that it prevents condensation forming and deadens sound from the metal vibrating. Will this work or what do you recommend? View answer

Answer posted 4 years ago

Question 48

Does this pro series also contain the hardwood cleaner? View answer

Answer posted 4 years ago

Question 49

Wool this wool rug pad prevent �??rug creeping' between my large wool rug & my nylon wall-to-wall carpeting? View answer

Answer posted 4 years ago

Question 50

How long is the average wait time from order to delivery? I plan to purchase Marmoleum and Bamboo flooring. View answer

Answer posted 4 years ago | SAMPLE - Forbo Marmoleum Striato - Sheet, Desert Sand

Browse by Topic