Question 1

I am a printmaking student, and we use linoleum as our block to carve. Is all of the flooring sheets the same material that we can use to carve? View answer

Asked 5 ´years ago | Marmoleum Flooring

Question 2

What is the sponge made of that comes with the cleaner? View answer

Asked 5 ´years ago

Question 3

Does this tolerate heat? I would like to caulk the gap between our gas fireplace surround and the firebox. The caulk will not be exposed to any flames as it will be outside of the firebox, but the outside of the firebox metal can get quite hot. Will this caulk tolerate heat if it is bordering/touching this hot metal? Thanks View answer

Asked 5 ´years ago

Question 4

I use 1.5" rigid (styrofoam) foam insulation boards in the window wells of our passive solar home to keep the sun out in the summer. However the styrofoam sheds and makes a mess on the floor. I'm looking for something to seal the boards so that they will not shed. Will the SafeCoat Safe Seal product be the best choice. I do not want something that will remain sticky as I take them on and off periodically. Please advise? View answer

Asked 5 ´years ago

Question 5

Would this be appropriate for dining table? View answer

Asked 5 ´years ago

Question 6

Is this Kahrs product acrylic-infused? I see that the finish is described as acrylic. View answer

Asked 5 ´years ago | Hardwood Flooring

Question 7

Can I use this on contact paper on the counter top? View answer

Asked 5 ´years ago

Question 8

Can ChemLink M-1 be used to securely attach an undermount stainless steel sink to a granite countertop? Thanks. View answer

Asked 5 ´years ago

Question 9

Can this be used as a sealer for floorcloths? View answer

Asked 5 ´years ago

Question 10

How is this product sold, by the square, by the pcs, what is the cost per sq., what is the time frame for ordering? View answer

Asked 5 ´years ago | Roofing

Question 11

Would Caliwell be an appropriate material on new construction of cedar foundation base boards of a greenhouse ? The Cedar will be attached to a concrete slab. Or would you recommend another product from your catalog . Such as vermont Natural coating penetrating waterproofer? Thank you View answer

Asked 5 ´years ago | Paints & Primers

Question 12

Country of origin? Where was this carpet made? View answer

Asked 5 ´years ago

Question 13

I am turning a carpeted bedroom into a workspace and would like to cover the entire room -350 square feet. Can I lay the Marmoleum over the carpet without glueing in case it needs to be turned back into a bedroom? The carpeting is very low wool. View answer

Asked 5 ´years ago | Marmoleum Flooring

Question 14

I'm in the process of using lead encapsulation paint to cover my antique window frames, however the paint I need to use is very matte similar to primer, so I'm looking for something to put on top of this lead encapsulation paint that has a gloss. What products would work? Could I use just Ecos gloss paint or would a gloss top coat like the Safecoat hardseal be better? View answer

Asked 5 ´years ago

Question 15

Should I use Safecoat Safe Seal or Safecoat Hard Seal to stop off-gassing from the inside of my kitchen and bathroom cabinets and under sinks built with plywood? Thanks View answer

Asked 5 ´years ago

Question 16

It recommends "Rug Gripper" for use with area rugs. I can't find the "Rug Gripper" on your website. Where is it? View answer

Asked 5 ´years ago

Question 17

I'm applying a Marmorino water-resistant Venetian plaster on my backsplash and I'm wondering about the feasibility of using it behind the stove as well. I need a sealer that is water, grease, and heat resistant. Would this product be recommended for that? More specifically, if it would stand up to the heat that it would be exposed to being behind a decently high-powered gas range stove. Thank you! View answer

Asked 5 ´years ago

Question 18

Will this work to install aluminum windows? View answer

Asked 5 ´years ago

Question 19

We are looking for flooring for the main room at our beach cottage (kitchen/dining/living combines) and are wondering whether we should choose Marmoleum or waterproof cork. We noted that the waterproof cork guarantee doesn't apply to sand damage, but think the Marmoleum may be similarly vulnerable. Any thoughts on the best option? View answer

Asked 5 ´years ago

Question 20

Can it be used on paneling? View answer

Asked 5 ´years ago

Question 21

Hello, I have 1 gallon of the SafeCoat Polyureseal in matte and 1 gallon in satin. I will likely need to use 2 gallons for my project, 1 initial coat and then a second on top. Is it possible to mix the two gallons together and then proceed with my project, or should I use the matte first and then follow it up with the satin? View answer

Asked 5 ´years ago

Question 22

Will this product completely seal off gassing of plywood or ?should I apply a separate seal before the acrylicq gloss View answer

Asked 5 ´years ago

Question 23

I am refinishing a set of 1940s steel cabinets. Two of the base cabinets have what I believe to be linoleum countertops. They are surrounded by stainless steel edging. There is a curve where the flat countertop and the short backsplash meet. Will your product be able to make that curve (perhaps with heat)? The widths of the cabinets are 18" and 30" so there would not be a long section needing to handle the curve. View answer

Asked 5 ´years ago

Question 24

I am looking for products to seal floor and joints of tortoise habitat constructed of wood? View answer

Asked 5 ´years ago

Question 25

Can I use this to seal a very high porosity 1/4in cork floor? Will it fill the small pores in the surface while staying slightly cushy? View answer

Asked 5 ´years ago

Question 26

Can I order a transition piece for this option? View answer

Asked 5 ´years ago | Cork Flooring

Question 27

The ingredients list linseed oil, then there is reference to this product being flax oil. Which is it? And is there risk of self combustion if left on rags? I believe linseed can combust if not disposed of properly. View answer

Asked 5 ´years ago

Question 28

Would 100-year old oak floors that have just been professionally sanded be considered weathered or relatively non-porous? I'm trying to figure out how much it will cost for 500-600 sq. feet assuming 2 coats will be sufficient View answer

Asked 5 ´years ago

Question 29

Is this waterproof and food safe? View answer

Asked 5 ´years ago

Question 30

Hi. I read one of these answers wrong I think. I'm working on a butcher block countertop. I was planning on using this product. I already have now. But now I've decided I need to stain the countertop. Is it possible to use Rubio Monocoat 2C Oil stain on the wood and apply this on top for extra protection? TIA for your help. View answer

Asked 5 ´years ago

Question 31

Would this be good for an aggregate driveway? And if so, roughly how long does it last? View answer

Asked 5 ´years ago

Question 32

What is R-Value of Forbo Marmoleum Click flooring? View answer

Asked 5 ´years ago

Question 33

Can you use regular floor wax on Marmoleum? View answer

Asked 5 ´years ago

Question 34

do you make these in 12' x 12'? View answer

Asked 5 ´years ago

Question 35

Is this appropriate for a walkout basement (so part on-grade and part below) where summer/fall humidity is often 70 - 80+% and the windows are open? View answer

Asked 5 ´years ago | Cork Flooring

Question 36

Can the primer be used on an already painted white desk? And can the paint be used after this primer? Or can the paint itself be used without the primer? View answer

Asked 5 ´years ago

Question 37

Is it pest proof? View answer

Asked 5 ´years ago

Question 38

What 100% acrylic colored gloss paint do you sell that would work with this? View answer

Asked 5 ´years ago

Question 39

Can you please explain how it is carbon negative? View answer

Asked 5 ´years ago | Cork Flooring

Question 40

Is this product used to remove overall odor from a wool carpet? View answer

Asked 5 ´years ago | Floor Cleaners

Question 41

Can water be added to this to thin it for a HVLP sprayer? I looked at the installation guidelines. It doesn't say if thinning the product with water is ok. View answer

Asked 5 ´years ago

Question 42

Will this work for sealing a wooden hot tub? I need a sealer that can be used to seal a fir hot tub I am building. It will be a small single person tub that is drained and filled after each use. I need a sealer that can be submerged in water up to 105 degrees F and not leach chemicals too much. View answer

Asked 5 ´years ago

Question 43

Hello, used 2 coats on teak and mahogany bench swing...love the product, the way it goes on, no awful smell all great. Question: I noticed after several weeks the wood grain was raised considerably and felt dry. We tested with water and it does bead up. Is it typical for the grain to raise after application? View answer

Asked 5 ´years ago

Question 44

Can this be used to seal cork wall tile? View answer

Asked 5 ´years ago

Question 45

Would this sealer be safe to coat the interior of a concrete candle vessel ? View answer

Asked 5 ´years ago

Question 46

Can I use this solution on a prefinished floor? View answer

Asked 5 ´years ago

Question 47

Can you paint over older paint I have a blue color and want to change to white? View answer

Asked 5 ´years ago

Question 48

Does your paint contain PFAS? View answer

Asked 5 ´years ago

Question 49

Will it hold up to wet conditions? View answer

Asked 5 ´years ago

Question 50

What shade would this oil be on pine? View answer

Asked 5 ´years ago

Browse by Topic