Question 1

I'm looking to use this to paint an intricate mailbox with multiple colors. In the interest of making it cost effective and to not be wasteful, is it possible to buy a gallon of the white non-tinted exterior paint and then just use a set of universal color tints to tint the ECOS paint myself? If so, is there a specific brand you'd recommend? Thanks. View answer

Asked 3 ´years ago

Question 2

Does this product come in a sample size? I don't see the option under 'size'. View answer

Asked 3 ´years ago

Question 3

Can this be used to stain a dining table? If so, would any other primers or sealants be needed with it? View answer

Asked 3 ´years ago

Question 4

Can this be safely used to seal in odors in a unfinished sugar glider cage? Was not sealed when made an I purchased it with that odor and to make it all worse from a smokers house. View answer

Asked 3 ´years ago

Question 5

Hi, can I use this oil on a piece of raw wood and apply the aqua resin over? Thank you View answer

Asked 3 ´years ago

Question 6

Does green building supply offer a safe, non toxic, natural floor wax for vinyl composite tile (VCT)? View answer

Asked 3 ´years ago

Question 7

Am concerned about water sitting on Marmoleum Click LOC Planks in small bathroom. Want extra waterproofing. Which moisture barrier should we get? Sub-floor is newly installed above grade plywood over diagonal redwood planks. View answer

Asked 3 ´years ago

Question 8

Will cat vomit damage this floor? View answer

Asked 3 ´years ago

Question 9

I have a large expanse of windows, is this product UV resistant? View answer

Asked 3 ´years ago

Question 10

What is the backing made of? View answer

Asked 3 ´years ago

Question 11

Does the back of that carpet contain Styrene Butadien? View answer

Asked 3 ´years ago

Question 12

What would be best to seal the outgassing from Kilz mold oil based paint? Kilz said it is fine to paint latex over their oil based paint. Would a couple of coats of Ecos purifying paint be better than AFM Safecoat paint? If not what AFM paint would you recommend? View answer

Asked 3 ´years ago

Question 13

Can you use this underlayment under floating cork floor? View answer

Asked 3 ´years ago

Question 14

Can AFM SafeCoat, Safe Seal be used on interior concrete floor? View answer

Asked 3 ´years ago

Question 15

Can this be used to prime raw wood that will be painted and become toys? View answer

Asked 3 ´years ago

Question 16

Hi!We are building a wooden bookshelf indoors and we need a product that gives some protection for the wood but it does not change the appearance of the wood. We would like to keep the untreated appearance of the wood (no yellowing, no shiny surface). Is it possible with this product? View answer

Asked 3 ´years ago

Question 17

How long is the sale on the Tres Avanti hardwood ? Guaranteed to have that price till a cut off date? View answer

Asked 3 ´years ago

Question 18

Can you guys ship to Pennsylvania? View answer

Asked 3 ´years ago

Question 19

I'm interested in sealing OSB subfloor (prevent/arrest off gassing), but the tackiness of SafeSeal will potentially/likely make installation of the Pergo click-lock flooring difficult. I'm looking at HardSeal and Polyureseal BP as other options. Any recommendations here? View answer

Asked 3 ´years ago

Question 20

I have a large expanse of windows, does the click cinch lock marmoleum have UV resistance? View answer

Asked 3 ´years ago

Question 21

I believe my slate tile in my bathroom had some type of sealer on it from the manufacturer. I do not know what kind. I want to add a further sealant to seal in whatever may have been used from the manufacturer, as well as to make my slate more water resistant. Would this be a good product for that? View answer

Asked 3 ´years ago

Question 22

Is there a plain white tile? View answer

Asked 3 ´years ago

Question 23

Does this possibly dry faster than standard carpet? For oceanside houses? View answer

Asked 3 ´years ago

Question 24

Hi, I'm trying to seal and protect a large ish old wood topped professional drafting table. Would you recommend I use the Safecoat clear natural penetrating oil, or the Safecoat Polyureseal BP? This will likely be a work table for drafting or making artwork. View answer

Asked 3 ´years ago

Question 25

Does this product block/encapsulate off-gassing (if used on particle board or plywood, for example)? View answer

Asked 3 ´years ago

Question 26

I would like to paint the concrete walls of my basement egresses white. They have some mildew I can't get off with the cleaners I have...what should I use as paint, and how should I prepare the walls? There is a bit of a plastic canopy over the egress, but not sealed. water and air gets in (I won't paint the floor of the egress). Thank you! View answer

Asked 3 ´years ago

Question 27

Can individual rolls be shipped? Is freight, which costs more than the product,the only option? View answer

Asked 3 ´years ago

Question 28

How many filters need replacing after 5 years? Where do I find the current cost of those filters? View answer

Asked 3 ´years ago

Question 29

Hi, I'm looking for a concrete sealer for a birdbath that will be covered with mosaic tiles. I will use thinset mortar to adhere the tiles then grout with an epoxy grout. Is there something you can recommend? View answer

Asked 3 ´years ago

Question 30

I find the specs to not be fully informative. For example--is there Permethrin in this carpet? If so, is Permethrin really needed in a wool carpet? Is there additive/chemical in it for stain resistance? it's very hard to get a simple, full "inventory" of just what is in any carpet. View answer

Asked 3 ´years ago

Question 31

Is this appropriate for a concrete garage floor? View answer

Asked 3 ´years ago

Question 32

Hi! Is this suitable for a gym flooring? View answer

Asked 3 ´years ago

Question 33

Is ChemLink Clear latex free? View answer

Asked 3 ´years ago

Question 34

Copy says the new locking mechanism is backwards compatible. Does this mean the tiles with the new mechanism can lock onto the old style? I need to replace some tiles that were purchased in 2008 with new ones. I don't want to replace the tiles over the entire floor. View answer

Asked 3 ´years ago

Question 35

I am installing Mannington Audra Max Apex 18" x 36" 8mm click floors in my kitchen and hallways. Do you recommend 1/8 or 1/4" underpayment? I would like to use 1/4" if possible. Thank you. View answer

Asked 3 ´years ago

Question 36

Once laid does this flooring smell of pine or have any noticeable odor? View answer

Asked 3 ´years ago

Question 37

Is this product safe for expensive, vegetable dyed oriental rugs? View answer

Asked 3 ´years ago

Question 38

Would marmoleum be a good choice throughout a home with plywood subfloor atop a crawl space, high summer humidity? View answer

Asked 3 ´years ago | SAMPLE - Forbo Marmoleum Fresco - Sheet, Marigold

Question 39

I see that application with a brush or roller is recommended; any experience applying this with a paint sprayer? Is the paint similar enough in it's viscosity to other paints (latex or oil) to use a paint sprayer? Thank you. View answer

Asked 3 ´years ago

Question 40

Would this be suitable for sealing the gaps between hardwood floor planks. Home was built around 1800 and still has the original floors? View answer

Asked 3 ´years ago

Question 41

What about condensation removal in a bathroom, with a tunnel sunlight, anyone have any ideas please? View answer

Asked 3 ´years ago

Question 42

What product could I use to add a fortifying topcoat to a newly laid floor made of prefinished oak parquet tiles? View answer

Asked 3 ´years ago

Question 43

Can ECOS exterior paints and primers be applied with professional spray equipment? View answer

Asked 3 ´years ago

Question 44

Can marmoleum be used over heated floors (hot water tubes)? + Will it allow heat to radiate into the room? View answer

Asked 3 ´years ago

Question 45

The sample we received looks different from samples we received from Kahrs directly. Do you finish your samples with oil or urethane prior to shipping? View answer

Asked 3 ´years ago

Question 46

Can you do a custom size? View answer

Asked 3 ´years ago

Question 47

Hello, I have one of these boards but recently found out the resin that was used is phenolic formaldehyde. Just the mention of anything formaldehyde gave me a scare so I searched the web for answers. The internet being like it is I found plenty of "organic mom" blogs saying the use of these boards is basically equivalent to poisoning your entire family. So I was very surprised to see you guys selling them. I am a customer of your paints and sealants and I trust you, so seeing this makes me feel better - but perhaps you can explain what makes these boards safe and nontoxic for food prep. I understand urea formaldehyde is the bad guy but why is the phenol variety ok? Is it possible it could leach into food during use? View answer

Asked 3 ´years ago

Question 48

Will this darken 100 year old white oak floors? View answer

Asked 3 ´years ago

Question 49

Is Marmoleum Click Waterproof? View answer

Asked 3 ´years ago

Question 50

How do you clean it? View answer

Asked 3 ´years ago

Browse by Topic