Question 1

I recently purchased a custom camper-van conversion. It has lots of wooden cabinets that were built with plywood and then finished with paint. There is also a wooden ceiling and wooden countertops that were stained. All the products used were water based but it has a strong toxic odor. Would this be the right product to use to abate the off gassing? View answer

Asked 6 ´years ago

Question 2

I'm looking for a waterproof and sealant for my kids' wooden play structure. It gets hit by sprinklers and is in full sun most of the day. Which product would you recommend? View answer

Asked 5 ´years ago

Question 3

Can this caulk (AFM SafeCoat Caulking Compound) be used to adhere a quartz vanity top to a wooden base? View answer

Asked 4 ´months ago

Question 4

Is AFM SafeCoat Safe Seal suitable for use over painted surfaces? View answer

Asked 4 ´months ago | AFM SafeCoat, Safe Seal

Question 5

What works well in a bedroom with the weight of dressers and bed? I was thinking plank but not sure View answer

Asked 3 ´years ago

Question 6

I'm thinking of using this product to finish coat a canvas covered boat. The boat bottom will be submerged for up to 6 hours at a time... then taken out of the water... can this finish handle that kind of use? View answer

Asked 5 ´years ago

Question 7

Is the new Sandy Chalk color the same as the discontinued White Cliffs? View answer

Asked 2 ´years ago

Question 8

We are a design build firm looking to move away from PVC based LVT flooring. Is there any kind of display showing the samples of the Marmoleum Cinch lock flooring that we could order to keep in our showroom permanently? View answer

Asked 3 ´years ago

Question 9

What is the R value of your 6mm cork underlayment? Thanks! View answer

Asked 5 ´months ago | US Floors, Natural Cork Underlayment Roll

Question 10

How does the Earth Weave Nature-Loc non toxic rug pad smell? View answer

Asked 5 ´months ago | Earth Weave Nature-Loc Wool Non-Slip Area Rug Pad

Question 11

Can I paint over Hard Seal, with water based paint? View answer

Asked 5 ´years ago

Question 12

I'm trying to choose between using the sheet or the click for a residential art room. I see that the click is water resistant. Would the click be problematic if a bowl of water was spilled but cleaned immediately. Also, the room would have a large heavy solid wood table in the middle. Would the clicks buckle from weight? View answer

Asked 6 ´years ago

Question 13

Can I use this on my cast stone fireplace The cast stone gets very hot closest to wood burning insert Is this product heat resistant if so to what temperature? View answer

Asked 5 ´years ago

Question 14

IS this product warrantied over radiant heat? View answer

Asked 6 ´years ago

Question 15

What happens if an item is out of stock? View answer

Asked 5 ´months ago

Question 16

Is AFM SAFECOAT the correct product for protecting "raw" steel table legs from rust? Table will be for indoor use only. View answer

Asked 2 ´years ago

Question 17

Is the product concentrated, do i need to add water to the product? if not, would you have anything like that? View answer

Asked 4 ´years ago

Question 18

Does unit need regular re-Calibration? View answer

Asked 4 ´years ago

Question 19

will this product help with paper/waste buildup in old cast iron waste pipe with bellies? (goes to town sewer not septic) View answer

Asked 5 ´years ago

Question 20

Can this be used on a concrete floor with radiant heat? Could the warmth from the floor make the wax finish soft? View answer

Asked 4 ´years ago

Question 21

Can I use this to seal a bird bath that's coated iron? some of that coated paint is coming off in the water View answer

Asked 4 ´years ago

Question 22

I'm curious about the recommended two coats. I intend to use the primer on all my surfaces mostly drywall that's been painted or ceilings which have been done with drywall and a skim coat. I have done some filling of holes and sanding as prep. Finally my question: if all my surfaces are primed with ECOS, do you still recommend two coats of paint, or will one coat on a primed surface suffice? Thanks, Danny F View answer

Asked 2 ´years ago

Question 23

Can this be used on engineered wood flooring? To trap the VOCs? View answer

Asked 3 ´years ago

Question 24

I am looking for a wax product to polish a concrete wall, do you have one? View answer

Asked 6 ´years ago

Question 25

I am considering placing an order for 4 boxes on MCT-793. What is the difference between the MCT and Modular tiles, other than the size of the tile? What is the product warranty for these tiles? View answer

Asked 6 ´years ago

Question 26

Is this safe for a baby crib ? View answer

Asked 4 ´years ago

Question 27

If the black mold can NOT be removed & the wall/ wood floor is inundated with it. Will this product still kill the mold and stop it from reproducing? (we would clean best we can) View answer

Asked 4 ´years ago

Question 28

Hi, I had a question and also feedback on our great experience with Marmoleum click installed back in Spring 2021. We did a kitchen, bathroom, laundry room at our cabin in Marmoleum click and it's great and we would recommend. My current question is whether click or MCT would be the best option for the kitchen in our home. My concerns are that we have painted plywood in our kitchen/laundry/bathroom and we would need to have appliances on the Marmoleum. Also, we used Barbados and Black in our cabin which was a great combo with old pine walls but not great with our yellow and white kitchen. Thinking that White Marble in MCT might be better (white is Swiss Coffee). Can we put MCT down if the floor has been painted and has some rough areas? View answer

Asked 2 ´years ago

Question 29

Can these be installed on a metal standing seam roof? View answer

Asked 6 ´years ago

Question 30

Are there antimicrobials in safe coat paints? View answer

Asked 3 ´years ago

Question 31

Do you have a way to identify what size units work for certain size rooms? View answer

Asked 6 ´years ago

Question 32

Hello,I was just curious if this was waterproof.Thinking about building an wood enclosure for a snake I have an didn't want the wood to get damaged due to humidity,etc? View answer

Asked 6 ´years ago

Question 33

DO THESE TUBES REQUIRE USING AMPERAGE FROM AN ELECTRICAL BOX? IS THIS PRODUCT AVAILABLE IN 16" size? Both are questions. View answer

Asked 5 ´years ago

Question 34

Is the potential for heat loss and is there something in place to prevent heat loss? View answer

Asked 5 ´years ago

Question 35

Hello, I plan to stain furniture for a chemically sensitive family. Can I use just the oil without applying the drying agent? Will it take longer, but dry anyway? View answer

Asked 2 ´years ago

Question 36

What about condensation removal in a bathroom, with a tunnel sunlight, anyone have any ideas please? View answer

Asked 3 ´years ago

Question 37

Hi! Can you recommend installers for mct tile in Portland, Oregon? View answer

Asked 3 ´years ago

Question 38

Im looking to seal art made up of many different types of materials (wood, paper, paint, metal, everything...) - I'm looking for it to be crystal clear and not have much in way of harmful chemicals. I realize this product isn't it since it looks like it's for mainly wood - any suggestions on an all purpose clear sealant that's also archival? Thanks in advance! View answer

Asked 5 ´years ago

Question 39

WILL THIS WORK for a fabric wallcovering sealer ? I need a clear non yellowing sealer.. View answer

Asked 4 ´years ago

Question 40

I have a Marmoleum to carpet and Marmoleum to bare concrete transition. What do you recommend for transition strips? View answer

Asked 4 ´years ago

Question 41

I have melamine faced mdf which type of AFM seal can I use. Do I need to sand it? View answer

Asked 5 ´years ago

Question 42

I have hpl faced blockboard kitchen Caracas..which type of AFM seal can I use?do I need to sand it? How to apply? Kitchen is one year old View answer

Asked 5 ´years ago

Question 43

I was told that no one makes luxury vinyl flooring/planks in the United States. I find that hard to believe. I don't want to buy from China for many reasons. What do you carry/sell that would be sturdy, dependable and made in the United States? We are looking for something that looks like wood. We have pets in the house, so thinking luxury planks would be best for us. View answer

Asked 7 ´years ago

Question 44

Do you have an installation manual for this product that can be provided as a pdf? View answer

Asked 3 ´years ago

Question 45

Can you paint a bathtub? View answer

Asked 5 ´years ago

Question 46

Hi, I have dogs and I am concerned that any of the carpets which have loops may get snagged by their nails. Can you confirm whether these carpets are high enough quality that I shouldn't be concerned about this? I have two styles in mind, Item #105586 Model #2018, and another which is not a loop design, but a cut pile. I prefer the looped design of the two. View answer

Asked 1 ´year ago

Question 47

We want to seal / finish steel staircases. It is all flat bar cold rolled so we have mill marks we want to keep. We can spray or brush. What is the best product to use? View answer

Asked 5 ´years ago

Question 48

Is this similar to Kreidezeit hard oil? I'm considering using it on a Japanese soaking tub I just made out of yellow Alaskan cedar. View answer

Asked 9 ´months ago

Question 49

I own a L shaped home that's 1,700 SF under roof. Would I need two 12W solar roof vent units, one for each side of the roof or 1 30W centrally located on the roofs center? Which would be more efficient? View answer

Asked 5 ´years ago

Question 50

Do you know if Safecoat has a color close to Behr's Polar Bear? View answer

Asked 1 ´year ago

Browse by Topic