Question 1

I have particle board kitchen cabinets in a place built over 30 years ago. Only surfaces visible when the cabinets are closed have a laminate veneer. The insides and presumably the bottoms and and backs are uncoated particle board. I want to seal the surfaces I can reach - the insides. I have a full leftover container of AFM Hard Seal from another project. I noticed Polyureseal BP did best at blocking formaldehyde in the tests on your website. Would you recommend Hard Seal, Acrylacq, or Polyureseal BP? View answer

Asked 6 ´years ago

Question 2

The question is can I use this product as a safe top coat for glass plates to eat on? View answer

Asked 5 ´years ago

Question 3

I'm wondering how "semi-transparent" this product is... I need to restain/seal my backyard fence that is older and has different colors to it based on where previous shrubs blocked water from hitting the fence. I am not sure how a clear would look in this situation, but I also don't want my fence to look like I painted it brown; I like seeing the natural grain of the wood. I'm debating between the Caspian Clear and the Acorn Brown. Do you have any suggestions? Thank you! View answer

Asked 6 ´years ago

Question 4

Are any of your products heat resistant ? Can it be used to seal concrete pots for candles? View answer

Asked 5 ´years ago

Question 5

Can any of your products be used to seal concrete planters? View answer

Asked 5 ´years ago

Question 6

I don't see a clear option. I see in the Q&A a comment about "pure" but don't see it offered. This is for exterior redwood siding that is old (50 years) but still a natural wood color. ? View answer

Asked 5 ´years ago

Question 7

Is this product suitable for the inside of a chicken coop? Or are there other products that would be better? - also, what product would you recommend for the exterior of the chicken coop? Thank you! View answer

Asked 5 ´years ago

Question 8

Can this be used on plastic or something spray painted? View answer

Asked 5 ´years ago

Question 9

Will this adhere over clear epoxy resin table top? View answer

Asked 7 ´years ago

Question 10

I used Watco Butcher Block Stain and Finish in hazelnut. I love the color. Can this product be used on it for maintenance? View answer

Asked 5 ´years ago

Question 11

Will this work on a pine and aspen? View answer

Asked 6 ´years ago

Question 12

What kind of gloves should you wear while applying? View answer

Asked 5 ´years ago

Question 13

What metals are used in the carboxylate metallic salts that are in the AFM SafeCoat, Naturals Oil Wax Finish? View answer

Asked 3 ´years ago

Question 14

Can this be used indoors in a bathroom? View answer

Asked 6 ´years ago

Question 15

I bought two loft beds for my kids that are phase 2 compliant but still smell and it scares me, what's the best product to use so there is no formaldehyde emitting from the beds? View answer

Asked 6 ´years ago

Question 16

I have latex stain on deck and want to apply oil stain. Would this work? View answer

Asked 5 ´years ago

Question 17

I don't have access to a buffer. Is a buffer absolutely necessary to apply? Why apply a second coat while first coat is still wet? Then rub any excess off after 15 minutes? View answer

Asked 4 ´years ago

Question 18

My husband and I are planning a kitchen remodel and are considering putting in butcher block or wood countertops. We've never had wood countertops before and in doing some research found out that there can be a lot of upkeep with oiling monthly. We are also concerned about water damage to the wood around the sink area, or from someone leave a glass of water on the counter that may have some water on the bottom of the glass. Do you have a food-safe product that is also powerful enough for kitchen countertops to handle water and liquids? We may be good at trying to quickly wipe up water from the counter, but kids are another story! Also, how often would it need to be reapplied in the future after the initial application? View answer

Asked 6 ´years ago

Question 19

I'm looking to seal kiln dried pine and cedar for exterior use as a garden greenhouse, with the goal of the final product being white wood. Can I use this product over white paint to seal in the chemicals (like other products advertise) while also expelling water? View answer

Asked 4 ´years ago

Question 20

We recently installed wood railing around our deck outside and painted it white, but rain seems to stick and leave spots. Will this work for us? View answer

Asked 5 ´years ago

Question 21

can this be used over a door stained with minwax product? View answer

Asked 6 ´years ago

Question 22

will it work over real milk paint products? View answer

Asked 2 ´years ago

Question 23

What do you recommend for cleaning the deck before application Vermont Natural Coatings PolyWhey, Exterior, Penetrating Stain? View answer

Asked 5 ´years ago

Question 24

I've applied 2 coats and realize it is going to be an outdoor piece. Can I apply a waterproof seal on top of the safecoat matte? View answer

Asked 5 ´years ago

Question 25

I'm wanting to adhere decorative napkins to a glass plate and seal it for food use. Can you recommend a product? View answer

Asked 6 ´years ago

Question 26

I have marmoleum click tiles with slight surface scratches. Can this be used to buff them out? View answer

Asked 4 ´years ago

Question 27

Can it be applied to packed dirt subfloor? View answer

Asked 7 ´years ago

Question 28

I am trying to prevent off gassing in a box truck with a wooden floor. The truck was used as an automotive service vehicle, so oil spillage and potentially other automotive chemicals spilled on the wooden floor of the box. Will this product be sufficient to protect me if I treat the floors with it? I would be inside for hours at a time (I'm a technician and this truck would be my mobile workshop). View answer

Asked 6 ´years ago

Question 29

Will this work on a resin fountain? Is it safe for birds View answer

Asked 5 ´years ago

Question 30

Which of your products is best for use on Masonite MDF hollow core interior doors? View answer

Asked 6 ´years ago

Question 31

Can this product be used over painted brick? Also, what would you recommend for sealing a natural wood bar top? View answer

Asked 2 ´years ago

Question 32

I have an old bottle of AFM safe seal. Any chance it's still good? I have a new bottle on the way, but I was thinking of trying the old one on the problem furniture while I wait. It's about 10 years old, though! View answer

Asked 2 ´years ago

Question 33

Are there any limitations on what cleaners I can use on this finish? I used this finish on original pine floors from 1850.Thank you! View answer

Asked 3 ´years ago

Question 34

Hi! I bought a kitchen table that is a black weathered wood. When I wipe down the table there are little black slivers of wood coming off. I want to seal it, would this work? View answer

Asked 5 ´years ago

Question 35

How big is the sample size? I want to test on a few different materials with the proper number of coats to determine which finish works best for which surface. View answer

Asked 3 ´years ago

Question 36

Is this safe to use to seal glass, for example water tobacco pipes? View answer

Asked 5 ´years ago

Question 37

Hello! I purchased a sample of this in satin and I love it but it's too shiny for a project I'm working on. Could you recommend another product that will seal wood (outdoors) that has a matte/flat finish? View answer

Asked 4 ´years ago

Question 38

Hello! Would this work for outdoor art and wood signs if the wood is untreated and the designs are painted with water-based acrylic? Also, is this non-yellowing? View answer

Asked 4 ´years ago

Question 39

Can this be used to seal cement candle holders? View answer

Asked 4 ´years ago

Question 40

1) I am wondering if this can be used over a bookshelf finished in a shiny "grey painted lacquer". (I am not sure if it is made out of oil-based polyurethane or an oil-based product and can't seem to figure it out.) I am chemically sensitive and am almost about to throw the shelf out, but it was expensive so I'm trying to give this a shot first. (For the record, this horrible shelf hasn't stopped off-gassing for over a year. I've had to keep it in our storage room because I can't stand the smell.) Do you think this product would work? 2) If this would work, and I also wanted to paint the shelf white, would I paint it before I put this on or after? I was planning on using milk paint. Thank you in advance. View answer

Asked 6 ´years ago

Question 41

Can I apply this over painted MDF paneling? View answer

Asked 6 ´years ago

Question 42

Are there any concerns with finishing a surface with Rubio Oil Plus 2C that is exposed to heat? I would like to refinish a mahogany fireplace mantle, and the piece can get warm/hot to the touch when the fire is going. View answer

Asked 5 ´years ago

Question 43

Would this product be suitable to seal/cover your clay paints? Would these two be safe to use together for children's toys? View answer

Asked 6 ´years ago

Question 44

Can it be used on an exotic hardwood like Ipe? And does it offer UV protection? View answer

Asked 6 ´years ago

Question 45

Does this product change the color of the wood? View answer

Asked 6 ´years ago

Question 46

Can I use this in an aquarium? View answer

Asked 5 ´years ago

Question 47

Does Hard Seal block off-gassing from pesticides? View answer

Asked 3 ´years ago

Question 48

Which of your wood sealants or finishes best prevents black mold? View answer

Asked 7 ´years ago

Question 49

I am looking for a product I can use to seal vinyl onto granite cutting, pastry and cheese boards - would this particular item work on a granite surface? View answer

Asked 7 ´years ago

Question 50

I am trying to finish a wooden baby slide. I was planning on either painting it white or staining the wood grey. If I paint or use a water based stain what is the best sealer for the top coat? View answer

Asked 5 ´years ago

Browse by Topic