Rubio Monocoat, Oil Plus 2C, Interior Stain and Sealer Kit Q&A

Question 1

Looking for advice on what to use for indoor and outdoor (will be making both) woodworking projects for stains and sealants? Thanks! View answer

Asked 2 ´years ago

Question 2

I want to order the Rubio Oil Plus 2 part and I found this link: http://www.greenbuildingsupply.com/All-Products/Paints-Coatings-Wood-Stains-Sealers/Rubio-Oil-Plus-2C-Part-A. I am not clear if I order this product if it comes with Part B or 2 or do I need to order that separately. Please advise. View answer

Asked 9 ´years ago

Question 3

Do you have samples of stain on pine? View answer

Asked 5 ´years ago

Question 4

If you need to restain the floor again once it starts to show wear do I need to sand it down again or just reapply? View answer

Asked 2 ´months ago

Question 5

Hi Sasha,I asked earlier about the Rubio oil being adequate to seal formaldehyde. You said no and sent me a list of other products by AFM that would possibly work. The project involved is particle board walls which need to be sealed to be safe for me. Because I am so exquisitely sensitive to formaldehyde, it would need to be the best one. Can you let me know which one this would be? Thank you, Micheila View answer

Asked 6 ´years ago

Question 6

With this product the Rubio oil plus stain work for sealing in formaldehyde? View answer

Asked 6 ´years ago

Question 7

You have any pictures of the cotton white on pine? View answer

Asked 5 ´years ago

Question 8

Can you use the mono coat over a gel stain? View answer

Asked 4 ´years ago

Question 9

What stain color is the closest to Early American? I am looking to match some other pieces in my home. View answer

Asked 5 ´years ago

Question 10

Hi, can i topcoat with oil-based or wax-based sealer for the latex-based painted doors? I have doors latex-based semi-gloss white painted, I want to apply a sealer for durability. it's confusing which sealer would be good. View answer

Asked 4 ´years ago

Question 11

Does this product act as sealer and finish? Comparable To let's say finishing your floors with pure ting oil? One and done, no need to top with anything else? View answer

Asked 2 ´years ago

Question 12

Hi there, can I use Rubio Monocoat oil + 2C to finish a new solid nailed white oak floor that has just been sanded, or should I use another product to seal it first? View answer

Asked 5 ´years ago

Question 13

Are there any concerns with finishing a surface with Rubio Oil Plus 2C that is exposed to heat? I would like to refinish a mahogany fireplace mantle, and the piece can get warm/hot to the touch when the fire is going. View answer

Asked 5 ´years ago

Question 14

Which of your wood sealants or finishes best prevents black mold? View answer

Asked 6 ´years ago

Question 15

I stained my raw stairs 4 days ago with oil based Min Wax which still smells, but did not stain dark enough gray. It is either pine or white oak, not sure. Can I use Rubio Oil Plus 2 C over it? I am chem sensitive, so it was a bad decision, but I had no idea organic products existed. Any solutions? View answer

Asked 6 ´years ago

Question 16

Can I use the Rubio Monocoat on my live edge kitchen counters? View answer

Asked 6 ´years ago

Question 17

How many milliliter are in a sample of Rubio monocoat? View answer

Asked 6 ´years ago

Question 18

Can I use Monocoat on kitchen cabinet door fronts that were previously stained with a water based pigment? View answer

Asked 6 ´years ago

Question 19

Can this stain be used on a bathroom vanity? If so, does it need to have some type of sealer applied after it dries? View answer

Asked 4 ´years ago

Question 20

Can you use this on Alderwood unfinished bedroom furniture? View answer

Asked 4 ´years ago

Question 21

Can I topcoat the Rubio oil Plus 2 with a clear oil based product for additional durability? View answer

Asked 2 ´years ago

Question 22

I am hoping to use the Rubio oil plus 2C on a birch butcher block countertop (for a home office work space, not for kitchen food prep). The unfinished birch is very light, and I would like to end up with a warm honey color. Any thoughts on what would work best? View answer

Asked 5 ´years ago

Question 23

I have a teak veneered dining table that has a fresh coat of teak oil on it. The directions on the can say that I can finish over it after 72 hours drying time. Can I use your product or should I stick to an oil based urethane? View answer

Asked 2 ´years ago

Question 24

How much Rubio Monocoat would it take to stain a 4 drawer dresser? View answer

Asked 2 ´years ago

Question 25

Is there any combination of Rubio Monocoat colors that will yield an antique European french white oak style? View answer

Asked 6 ´years ago

Question 26

I just coated a table in Rubio Monocoat and it looks beautiful, but I was hoping to do another layer of something to make it more water-resistant and durable since this will be a well-used kitchen table. What would you recommend that is food-safe or food-grade? View answer

Asked 4 ´years ago

Question 27

can I use mineral spirits to clean the floor prior to coating? View answer

Asked 6 ´years ago

Question 28

Can this be used to stain a dining table? If so, would any other primers or sealants be needed with it? View answer

Asked 3 ´years ago

Question 29

I want to use Rubio Monocoat 2C to stain & seal some new unfinished drawers I'm installing in the pantry. it's a high-touch surface, sometimes with oily hands (cooking!). I want minimal maintenance. I'd like to be able to just wipe them clean with a wet rag, like I do on my latex-painted cabinets. Should I seal with something else after the 2C? View answer

Asked 5 ´years ago

Question 30

I would like to use your cherry coral on my oak cabinet that need to be spruced up. do you think this is a good combo? View answer

Asked 6 ´years ago

Question 31

When using on butcher block countertop how long till the sink can be installed and used ??? View answer

Asked 5 ´years ago

Question 32

I was wondering if after using this two part wood oil stain if sealing the wood still needed to be done? View answer

Asked 5 ´years ago

Question 33

We are refinishing 440 sf of red oak flooring with your product White Cotton how much should I order? I'm thinking 2- 1.3L? Oak is a bit porous. View answer

Asked 5 ´years ago

Question 34

I'm looking for a safe stain to use on my raised garden boxes. I'd like a little dark staining and a protectant. Can you recommend something? View answer

Asked 6 ´years ago

Question 35

What are the instructions for applying Rubio Monocoat to pine molding and not a floor? View answer

Asked 5 ´years ago

Question 36

Can Rubio Monocoat be used on a teak veneer tabletop? If so, does it take after a light sanding? Or need other prep? Thanks! View answer

Asked 5 ´years ago

Question 37

Can the colors be mixed to make a custom color? View answer

Asked 6 ´years ago

Question 38

What is the difference between the pure and the natural Rubio Monocoat? View answer

Asked 4 ´years ago

Question 39

For sample purposes do I need Part B? View answer

Asked 2 ´years ago

Question 40

I was hoping to use this on patio furniture, but I see that it is interior only. The furniture is under a deck and will not be directly rained on, but will be exposed to extreme humidity (I live in Mississippi) and the occasional rain blowing in. Will this product work or is there another that is recommended? View answer

Asked 6 ´years ago

Question 41

I am wanting to use your Rubio Monocoat, Oil Plus 2C, Interior Stain Kit on my HEMLOCK flooring. I would love to finish to look like the current sanded raw wood. We sampled the PURE (clear) and it added a sheen and a slight amber. Do you have a color you would suggest it I want the wood to appear 'untreated'? I know it needs some sheen as a matte finish shows everything.Thank you View answer

Asked 5 ´years ago

Rubio Monocoat, Oil Plus 2C, Interior Stain and Sealer Kit Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic