Answer
Apr 03, 2020 - 04:00 AM
Previously sealed/painted surfaces should be sanded to promote adhesion (all gloss must be removed). Wet sanding is recommended. Surface should be completely dry before application. Clean surfaces of dirt, grease, mildew and oil. Always spot test for adhesion over prior coatings. APPLICATION:Before using, roll the Safecoat Polyureseal BP container well, then apply as is. Stir product thoroughly every 20 minutes during application. Apply with a brush, pad or airless sprayer. When sealing dark surfaces and a matte sheen is desired, start with gloss sheen coats prior to finishing with a matte sheen.Entire Application guide is here : https://www.greenbuildingsupply.com/core/media/media.nl?id=1420484&c=772072&h=e
c7cb2157380ebdbd2b2&_xt=.pdf
c7cb2157380ebdbd2b2&_xt=.pdf
