Good Afternoon, Mr. Goj, I want to paint the interior of a terracotta pot to seal it with the AFM Safecoat DynoSeal (dark color). After decoupaging the exterior of the pot, I want to seal it with the AFM Polyureseal EXT Satin (clear color). Is there a certain temperature range, they should be applied? And a level of humidity? I was going to apply indoors, if it was safe. it's been raining and a little cooler, outdoors. I purchased the samples, and will probably be buying the regular size at some point. I thank you so much for your time. Have a Merry Christmas and a Happy and Blessed New Year. SAMPLE - AFM Safecoat, EXT Exterior Polyureseal Clear, Satin Wood Stains & Sealers

Question

Good Afternoon, Mr. Goj, I want to paint the interior of a terracotta pot to seal it with the AFM Safecoat DynoSeal (dark color). After decoupaging the exterior of the pot, I want to seal it with the AFM Polyureseal EXT Satin (clear color). Is there a certain temperature range, they should be applied? And a level of humidity? I was going to apply indoors, if it was safe. it's been raining and a little cooler, outdoors. I purchased the samples, and will probably be buying the regular size at some point. I thank you so much for your time. Have a Merry Christmas and a Happy and Blessed New Year. SAMPLE - AFM Safecoat, EXT Exterior Polyureseal Clear, Satin Wood Stains & Sealers

Status: Open Dec 20, 2021 - 07:05 AM

1answer

Answer

Dec 21, 2021 - 07:43 AM

We do have application instructions on the product detail pages for both these products, in the downloads section. And the samples should have shipped to you with those pages as well. No worries, I'll include direct links below for your convenience.EXT Application Instructions: https://www.greenbuildingsupply.com/core/media/media.nl?id=1067063&c=772072&h=8
YsEGMnS5r6L43gr-oCIU7cZhdI9OMKFvyXJFfZCH91i7PCO&_xt=.pdfDynoSeal Application Instructions: https://www.greenbuildingsupply.com/core/media/media.nl?id=1379467&c=772072&h=U
i0gI10OLzvDgPL4nre50E-5h7edkZ2nYRPLZMFiJ6qECsqk&_xt=.pdfEXT says (with regards to temp): Apply at temperatures above 50 degrees F. Do not apply if temperatures below 45 degrees are expected within 24 hours. Cold weather or excess humidity or a sudden temperature drop will greatly affect any finish at the time of application. Dampness can dull the gloss. Do not paint in direct sun... DynoSeal says (with regards to temp): Re-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Temperatures should be expected to remain above 45 degrees F for two days to allow full curing...