I have brand new oak butcher block style countertops from IKEA. We wanted to keep them as natural as possible and so we put 3 layers of mineral oil, and a 2 layers of a mineral oil/beeswax finish. As soon as a moist dishtowel rested on the countertop, the grain swelled up and was rough. We need to put something else on that's more durable after all. Will this Naturals Oil Wax Finish be ok to apply on top of these other natural oils/wax? Sure seems like there's plenty more penetration capacity based on how NON-water resistant the counters seem to be still. Oh and our sink is set into the countertop (lots of potential water exposure) and cooking will take place on them, but no chopping directly on them. SAMPLE - AFM SafeCoat, Naturals Oil Wax Finish Wood Stains & Sealers

Question

I have brand new oak butcher block style countertops from IKEA. We wanted to keep them as natural as possible and so we put 3 layers of mineral oil, and a 2 layers of a mineral oil/beeswax finish. As soon as a moist dishtowel rested on the countertop, the grain swelled up and was rough. We need to put something else on that's more durable after all. Will this Naturals Oil Wax Finish be ok to apply on top of these other natural oils/wax? Sure seems like there's plenty more penetration capacity based on how NON-water resistant the counters seem to be still. Oh and our sink is set into the countertop (lots of potential water exposure) and cooking will take place on them, but no chopping directly on them. SAMPLE - AFM SafeCoat, Naturals Oil Wax Finish Wood Stains & Sealers

Status: Open Sep 24, 2019 - 10:15 AM

1answer

Answer

Sep 30, 2019 - 11:37 AM

Mineral oils do not seal the wood and are primarily designed as maintenance products only. They do not harden like linseed oil and should only be used after the wood is firmly sealed with linseed oil. AFM SafeCoat, Naturals Oil Wax Finish is a great product for sealing wooden floors and various millwork projects but it is not meant for butcher blocks because the oils are not edible. We recommend AFM SafeCoat, Naturals Clear Penetrating Oil instead because it is made of organic oils and is harmless. Two coats, wet on wet will provide long lasting resistance to moisture. However, routine maintenance is necessary with the Mineral Oil, AFM Naturals oil or Bioshield Cutting Board Oil. Before application, the surface must be clean of any grease, oils, dust, dirt, wax, prior coatings, adhesives and other foreign materials. Because there is mineral oil already on the surface, sanding with 100-120 grit sandpaper should be used. Detailed instructions: https://www.greenbuildingsupply.com/core/media/media.nl?id=42839&c=772072&h=d7f
cdacf9883fd77b84e&_xt=.pdf