Long-lasting, breathable, non-toxic, zero VOC, mineral interior/exterior paint

Silacote Concrete and Masonry Paint is designed for use on inorganic cementitious substrates and can be used in both interior and exterior applications. It has many beneficial characteristics such as water vapor permeability, incombustibility, prevents mold, mildew, or algae, radiant heat barrier, colorfast, zero VOC, and environmentally safe.

This product penetrates into the inorganic substrate of masonry and then petrifies, forming a micro-crystalline structure that resists moisture and helps to reflect heat. Extremely long-lasting and durable, Silacote Concrete and Masonry Paint is not a topical finish, therefore it will not crack and peel off the structure. It has been used in hotels and churches for more than a hundred years and holds up extremely well.

Silacote is for walls or ceilings and not for floors. It must be applied over a masonry substrate such as concrete, stucco, brick, fiber-cement, or MGO board. The surface must be clean, dry, porous, and free of paint, sealers, oil, or wax. It must be used with a Silacote Primer and mixed 1/3 primer 2/3 paint. It comes in a smooth or textured finish and can be tinted to over 100 pastel colors. It can be applied with a brush, roller, or sprayed. Only one prime coat and one top coat are needed.

NOTE: Ordering Tinted Paint requires an additional 2-3 days to process orders. Tinted paint orders can not be expedited. Tinted paint is not returnable or refundable.

TIP: Box your paint.
Boxing paint means combining all the paint of one color into a larger container BEFORE painting. This blends any inconsistencies in color, especially on large surfaces where the slightest variation from one can to another could be visible. If you think you may not have enough paint to finish one wall, don't begin until you receive more paint. Box the new gallon with the original and then finish the job.