Safe for Chemical Sensitivites
Vetted for MCS, allergies and asthma
Gulf Synthetics PermaBond
Item #18532
Model #PermaBond
Gulf Synthetics PermaBond-
Gulf Synthetics PermaBond
30-DAY RETURNS ON MOST ITEMS
Changed your mind? No problem. Most items are returnable within 30 days. Just call us and we'll sort it out together.
Gulf Synthetics PermaBond
Gulf Synthetics PermaBond
Item #18532
Model #PermaBond
$94.70
Shipping calculated at checkout.
Total
$94.70
PermaBond non-toxic primer for DeckRevive
Cold Weather Alert
This product may not perform properly if applied below the required temperature. Please check installation instructions on our website. Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 888.727.2101PermaBond is an acrylic-based two-part polymer, especially formulated to penetrate and lock into wood fibers, providing a strong molecular bond for DeckRevive. PermaBond offers that extra bit of insurance against some of the unknowns that distressed wood may have been exposed to. Priming with PermaBond ensures excellent adhesion to very weathered boards.
Permabond is non-toxic and zero VOC. It dries quickly and can be mixed with any color by adding 1 quart of 100% water-based acrylic exterior gloss paint. Pot life is 14-21 days after components are blended. Shelf life is 2 years unopened if stored in cool dry area. Do not allow to freeze. Coverage is 300-400 sq. ft. depending upon porosity of the substrate.
NOTE: This is now REQUIRED by the manufacturer for DeckRevive application over new OR old wood.
NOTE2: Pressure treated wood must be seasoned for one year before application of PermaBond. That means the wood must sit out in the weather unprotected for one year before using PermaBond.
Why We Like It
DeckRevive is a fantastic product, but if your deck is badly weathered and falling apart, and you don't have the time or money to sand it down to bare wood, this is the best way to insure they will bond well. You still have to clean off dirt, mold and mildew, but PermaBond is extremely aggressive, and it bonds to almost anything porous.
Features & benefits
- Enhances adhesion โ use on any wood to improve bonding
- Fast-drying โ dry to touch in minutes; open to foot traffic in a few hours
- Multi-purpose โ use on decks, docks, siding, shakes, hand rails and furniture
- Encapsulates wood โ locks down splinters; fills holes
- Unlimited color range โ just add any color latex or acrylic paint
- Non-toxic โ to human or aquatic life
- Safe โ for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance
- Eco-friendly โ zero VOC
Specs
Dimensions
Weight per Sale Unit
11 lbs
Coverage
1-Gallon = 300-400 SF
Recommended # of coats
1
Basics
Interior or Exterior
Exterior,
Use on
Concrete
Wood
Wood
Application method
Paint brush
Roller
Roller
Application instructions
Substrate preparation: For best results, we recommend the surface to be CLEAN, DRY, DULL, and of MODERATE TEMPERATURE.
New wood or concrete: Remove any dirt, grease, glue or other contaminants. Moisture content of wood should be no more than 20%. Sand to 150-180 grit. Proper sanding of wood is absolutely critical to achieve the best adhesion of the coating to the substrate.
Old wood or concrete: Clean the surface by power washing, and allow substrate to dry completely for a minimum of 48 hours. DO NOT use a Deck cleaning product because many contain solvents. DO NOT use a detergent with a de-greaser. Acid etching of Concrete is not required
Mixing Instructions: If desired, add one quart of any 100% acrylic exterior gloss latex paint and mix briskly with a drill and paint mixer for one minute.
Application: Apply one coat to wood or concrete by cutting in edges with a nylon/polyester paintbrush. Apply one coat to wood or concrete surface using a 3/8โ nap nylon/polyester roller. DO NOT allow PermaBond to cure for extended periods of time before applying subsequent topcoats. As soon as it is dry, immediately apply the initial coat of DeckRevive or DockRevive.
Clean up: Clean tools with warm, soapy water.
Download "Application Instructions" document for complete instructions.
New wood or concrete: Remove any dirt, grease, glue or other contaminants. Moisture content of wood should be no more than 20%. Sand to 150-180 grit. Proper sanding of wood is absolutely critical to achieve the best adhesion of the coating to the substrate.
Old wood or concrete: Clean the surface by power washing, and allow substrate to dry completely for a minimum of 48 hours. DO NOT use a Deck cleaning product because many contain solvents. DO NOT use a detergent with a de-greaser. Acid etching of Concrete is not required
Mixing Instructions: If desired, add one quart of any 100% acrylic exterior gloss latex paint and mix briskly with a drill and paint mixer for one minute.
Application: Apply one coat to wood or concrete by cutting in edges with a nylon/polyester paintbrush. Apply one coat to wood or concrete surface using a 3/8โ nap nylon/polyester roller. DO NOT allow PermaBond to cure for extended periods of time before applying subsequent topcoats. As soon as it is dry, immediately apply the initial coat of DeckRevive or DockRevive.
Clean up: Clean tools with warm, soapy water.
Download "Application Instructions" document for complete instructions.
Room recommendation
Decks & Patios,
Eco-replacement for
Toxic Primer,
Shelf life
2 Years
Storage
Store in cool dry place out of sunlight
Chemically-sensitive safe
Test before use
Yes, test on inconspicuous area
Features
Material Origin
United States,
Country of Manufacture
United States,
Cleans up with
Soap & Water
Base
Water-based
Paint finish type
- Sealer
VOC content
0.0 grams/liter
Drying time
3-4 hours depending upon humidity and temperature
Freeze/thaw safe
No
Formaldehyde emissions
No added urea formaldehyde
Finish
Sealer,
Questions & Answers