Need Help? Ask Our Eco Advisors
25-Fl Oz (0.75-Liter)
Bioshield, Penetrating Oil Sealer
Bioshield, Penetrating Oil Sealer
Item #2671
Model #5-0.75
$30.25
Shipping calculated at checkout.
High-solids primer that protects very absorbent, dry wood
Bioshield Penetrating Sealer is a natural primer perfect for sealing cork, dry and absorbent woods, and large surfaces such as floors and architectural woodwork. In addition, it's the easiest kind of finish to apply – virtually anyone can achieve great results.
NOTE: This Penetrating Oil Sealer must be used with other oils for the finish coat. After priming, finish with Bioshield Hard Oil or Bioshield Floor and Furniture Hardwax.
Downloads
Why We Like It
With its high solids content, this penetrating sealer cures over time to a very hard finish and provides excellent protection against moisture.
Features & benefits
- Deep penetration – seals most kiln-dried wood as well as cork, masonry, stone and brick; excellent coverage
- All natural ingredients – made of clarified linseed oil, lead-free dryers and essential oils
- Non-toxic, odor free – free of petroleum distillates, lead and other hazardous materials
- Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance
- Easy-to-apply – use pad or brush
Specs for 
25-Fl Oz (0.75-Liter)
Dimensions
Weight per Sale Unit
1.8 lbs
5.9 lbs
Coverage
75 - 113 SF
Recommended # of Coats
2
Re-coat After
As needed
Basics
Interior or Exterior
Interior,
Use On
Bamboo: flooring
Brick
Cork
Cork: flooring
Doors
Hardwood: flooring
Masonry
Masonry: porous
Masonry: unsealed
Slate
Stone
Stone: porous
Stone: unsealed
Surfaces: large
Windows
Wood
Wood: architectural woodwork
Wood: beams
Wood: boats
Wood: decks
Wood: dry and absorbent
Wood: new
Wood: oriented strand board (osb)
Wood: particle board
Wood: plywood
Wood: resanded
Wood: unsealed
Brick
Cork
Cork: flooring
Doors
Hardwood: flooring
Masonry
Masonry: porous
Masonry: unsealed
Slate
Stone
Stone: porous
Stone: unsealed
Surfaces: large
Windows
Wood
Wood: architectural woodwork
Wood: beams
Wood: boats
Wood: decks
Wood: dry and absorbent
Wood: new
Wood: oriented strand board (osb)
Wood: particle board
Wood: plywood
Wood: resanded
Wood: unsealed
Surface or Product Preparation
Surface should be sound, dust free, and free of contaminants such as mildew, oil, and grease. The maximum moisture content for softwoods should not exceed 18 percent, and hardwoods should not exceed 12 percent moisture. Very resinous woods such as teak should be cleaned with BioShield Citrus Thinner, and other exotic woods should be wiped with an alcohol thinner (ethanol). Thin with no more than 1 part solvent to 4 parts of oil.
Application Method
Cotton cloth - lint free
Paint brush
Paint pad
Paint brush
Paint pad
Application Temperature Range
Warmer than 55°F
Application Instructions
Allow-penetrate for approximately 25 minutes, then wipe off any exess with a soft, absorbent, lint-free cotton cloth - lint free. Repeat process 24 hours later. apply with paint pad or brush, then use cotton cloth - lint free--oil also can be used for spraying or dipping.
Location
All Rooms,
Eco-replacement for
Sealers,
Storage
Store in cool dry place out of sunlight
Chemically-sensitive safe
Test before use
Yes, test on inconspicuous area
Features
Material Origin
Germany,
Country of Manufacture
Germany,
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations. Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Cleans Up With
Bioshield Citrus Thinner
Base
Oil-based
Paint Finish Type
- Sealer
VOC Content
15.0 grams/liter
Drying Time
24 hours
Appearance When Dry
Slightly amber
Formaldehyde Emissions
No added urea formaldehyde
Finish
Sealer,
Questions & Answers