Bioshield, Aqua Resin Stain Finish

Details
Why We Like It
Specs
Q & A
Reviews

Non-toxic wood stain finish for interior and exterior use

Cold Weather Alert

This product may not perform properly if applied below the required temperature. Please check installation instructions on our website. Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 888.727.2101

Bioshield Aqua Resin Stain Finish is an odor-free, weather-resistant, water-based finish for wood surfaces. Use it worry-free on children's cribs, swing sets, windows, doors, wood furniture and more. It's quite user-friendly and dries to the touch in 15-30 minutes.

This product is designed for vertical wood surfaces. When used on indoor wood flooring, it should be followed with either AFM Polyureseal BP or Vermont Natural Coatings PolyWhey Floor Finish which has polyurethane protection.

NOTE: The images of the samples were applied over ash wood.

NOTE2: Soft woods like pine are very porous and often appear splotchy unless sanded and treated properly by professionals.

NOTE3: Always test first with samples.

Downloads

Why We Like It

If you have young children or are chemically sensitive, this product is as safe and as good as it gets. It applies easily with virtually no odor, and it doesn't off-gas at all.

Features & benefits

Easy-to-use — apply with a bristle brush, foam brush, fine roller or sprayer; use one coat for priming and two coats for full strength
Versatile — use on hard or porous indoor surfaces such as children's cribs, swing sets, windows, doors, wood furniture, etc.
User-friendly — low-drip and low-splash
Fast-drying — dry to the touch after 15-30 minutes
Long-lasting color — light-stable and UV-resistant
Non-toxic — made with natural raw materials; no solvents, biocides, fungicides or hazardous chemicals
Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance
Eco-friendly — zero VOC

NOTE: This water based product soaks into freshly sanded wood flooring very quickly and can dry within seconds. In order to maintain a wet edge, additional water may be added to the stain and/or sprayed on the floor prior to application. Never add solvents. Always test first.

Specs for White / 25-Fl Oz (0.75-Liter)

Dimensions

Weight per Sale Unit

2 lbs

Coverage

90 - 112 SF

Recommended # of coats

1-2 coats indoors, 3 coats outdoors (not for direct weather or horizontal surfaces)

Re-coat after

2 hours

Basics

Interior or Exterior

Interior & Exterior,

Use on

Doors
Windows
Wood
Wood: architectural woodwork
Wood: paneling

Surface or product Preparation

Surface should be clean, dry, free of grease and absorbent.

Application method

Brush
Foam brush
Hand pump sprayer
Roller - fine

Application temperature range

Warmer than 55°F

Application instructions

Aqua Resin Stain Finish has a gel-like consistency and needs-be stirred before use. Apply by brush, foam brush, or sprayer (Airless or Aircoat) at temperatures above 8o C (46o Fahrenheit). Apply one thinned-down coat (10% - 15% of water) for priming, then two coats full strength.

Room recommendation

All Rooms,

Eco-replacement for

Stains,

Storage

Store in cool dry place out of sunlight

Chemically-sensitive safe

Yes learn how to test a non-toxic product for tolerance

Certifications

Meets or exceeds California Air Resources Board (CARB) requirements
Meets or exceeds Californial Proposition 65 requirements

Features

Material Origin

Germany,

Country of Manufacture

Germany,

Recycling or disposal

Dispose of excess product in accordance with all local state and federal regulations. Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials

Cleans up with

Neutral Cleaners

Base

Water-based

Paint finish type

Sealer
Stain

VOC content

0.0 grams/liter

Drying time

Dries in 15 - 30 minutes, sanded after one to two hours.

Freeze/thaw safe

Appearance when dry

Matte

Formaldehyde emissions

No added urea formaldehyde

Finish

Sealer, Stain,

Your cart is empty

Cart (0 Items)

Safe for Chemical Sensitivites

See & Test Before You Buy

12,000+ Five-Star Reviews

30-DAY RETURNS ON MOST ITEMS

Bioshield, Aqua Resin Stain Finish