SAMPLE - Caliwel Home and Office Mold and Mildew Inhibitor Q&A

Question 1

Can you paint this directly over a moldy surface or do you have to clean the mold first? If you do have to remove the mold first what product would you recommend (for bedroom and bathroom walls) View answer

Asked 6 ´years ago

Question 2

After removing a shower surround some mold was found on the wood support. I cleaned it with vinegar & water and then followed this up with bleach & water. it's better but still visible. I am concerned that mold will get reactivated with moisture; we will install a tub/shower in this space. Can this product be used to seal the mold? View answer

Asked 2 ´years ago

Question 3

What is the sheen of the Industrial Caliwel, something other than flat? View answer

Asked 2 ´years ago

Question 4

How does this compare with the Kilz primer for mold that my contractor wants to use in terms of health/environmental impacts? View answer

Asked 5 ´years ago

Question 5

We are interested in applying Caliwel to the exposed rafters in our unfinished basement as part of a mold remediation and prevention effort. Would you recommend spray application? View answer

Asked 6 ´years ago

Question 6

How big is a sample? View answer

Asked 5 ´years ago

Question 7

Can I use this on the ceiling of my shower? Do I need to use a primer underneath? View answer

Asked 6 ´years ago

Question 8

I am looking for a sealer for concrete basement floor that will kill pet odors? View answer

Asked 3 ´years ago

Question 9

I am looking for a non-toxic wood primer. I plan on topcoating with ecos air purifying paint but I'm not sure that the Eco wood primer is the least toxic primer. I have very severe MCS. Which wood primer would you recommend for lowest toxicity? Thank you View answer

Asked 4 ´years ago

Question 10

Can I paint the bathroom walls with this and then apply a tile backsplash on top? Or will the tile materials react with the paint? Hoping this could prevent mold growth behind the tile in our bathroom. View answer

Asked 4 ´years ago

Question 11

What primer should I use underneath the Caliwel Home and Office paint? Their website says it needs a 100% acrylic primer. Are the safecoat transitional primer or ecos universal primer 100% acrylic? Thank you for your help! View answer

Asked 5 ´years ago

Question 12

Can this be used over pressed fiberglass insulation? Like what is inside an insulated HVAC vent boot? Thx. View answer

Asked 5 ´years ago

Question 13

can you use caliwel home and office over Zinsser Bulls Eye Zero primer ?? View answer

Asked 2 ´years ago

Question 14

can you put this on over Safecoat Hardseal? View answer

Asked 4 ´years ago

Question 15

Can you use this to paint over walls that still have wallpaper on it? View answer

Asked 5 ´years ago

Question 16

Will the Caliwel Home and office product work on exposed interior brick that has never been painted? View answer

Asked 6 ´years ago

Question 17

Does it kill mold? View answer

Asked 4 ´years ago

Question 18

How big is the sample size ? View answer

Asked 1 ´year ago

Question 19

While most of the mold has been removed, how dry does the wood have to be before using your paint? Is there a moisture reading to shoot for? View answer

Asked 5 ´years ago

Question 20

Can this product be sprayed on? View answer

Asked 4 ´years ago

Question 21

i see that the paint only comes in bright white, but i'm still unclear: can i add a tint? View answer

Asked 4 ´years ago

Question 22

Can I paint this as a second coat (top coat) over Green Building Supply, Penetrating Concrete Sealer in a crawl space and basement? View answer

Asked 5 ´years ago

Question 23

What Color is this paint? Can it be tinted? View answer

Asked 6 ´years ago

Question 24

Can this be applied directly on painted walls? I am unsure if the paint is water-based. Can I use this on a shower ceiling? View answer

Asked 4 ´years ago

Question 25

Hi can I use this in my greenhouse? Can the paint get wet? View answer

Asked 6 ´years ago

Question 26

Can I paint over this paint? View answer

Asked 1 ´year ago

Question 27

Can I mix a gallon of the white Home and Office into one of the pastel colors to lighten the color? View answer

Asked 2 ´years ago

Question 28

Can I apply to an attic that has temperatures ranging from 0 to 140 degrees? View answer

Asked 2 ´years ago

Question 29

When using Caliwel on framing wood, does it allow the wood to breath? View answer

Asked 2 ´years ago

Question 30

Does this paint have a flat finish? View answer

Asked 5 ´years ago

Question 31

If I want to use this on interior plywood of a shed can I still seal the plywood first to stop off gassing and what product would work to do that and still be able to use this on top of it? View answer

Asked 2 ´years ago

Question 32

Would this be appropriate inside a three season sun porch? The porch is exposed to a lot of sunlight and also temperature/humidity fluctuations, but otherwise not "exterior" in the sense that it does not get exposed to rain etc inside the sunporch. View answer

Asked 5 ´years ago

Question 33

Can this be top coated, i.e. treated like a primer? View answer

Asked 6 ´years ago

Question 34

After using this paint is it okay to wash the walls? View answer

Asked 1 ´year ago

Question 35

Could this be something I paint on the inside of (dry)wall(s) behind a new shower for extra protection before we seal it off and tile it? View answer

Asked 2 ´years ago

Question 36

What's the best sealant for untreated pine window frames? View answer

Asked 4 ´years ago

Question 37

I want to use this on a 100+ year old desk that smells musty even though it's been cleaned. I've been looking for a mold sealant that is clear and matte, this looks like the best option. There is a light finish already on the desk, will this adhere to it? View answer

Asked 4 ´years ago

Question 38

I am thinking of using this in a "root cellar" room of my basement that is directly below my front door patio, so it gets cold in the winter. Can I add Radiosity to this product without impacting the performance? View answer

Asked 5 ´years ago

Question 39

Will it allow brick to breathe? View answer

Asked 1 ´year ago

Question 40

Can this paint be applied on an already painted (and mildewy) ROUGH concrete surface. These are interior kitchen cabinet areas in a Mexican house. I understand that primer will be needed but I still need assurance it will not crack or have issues on a rough concrete surface? View answer

Asked 2 ´years ago

Question 41

I recently had mold remediation and everything was fiber locked by the company. It was recommended that we apply it thicker. Can caliwal be painted over fiberlock? It would be wood and cinder block where I would be using it. View answer

Asked 4 ´years ago

Question 42

Will it work for the wooden parts in the crawl space? View answer

Asked 1 ´year ago

Question 43

What is recommended a lite coat or a heavy coat? View answer

Asked 3 ´years ago

Question 44

So what exactly is "BNA" ? "Bi-Neutralizing Agent" sounds pretty vague. Thanks. View answer

Asked 6 ´years ago

Question 45

Hi which product is better suited for behind walls, on studs, subfloors, concrete floors, etc? The industrial or this interior product? Thanks! View answer

Asked 3 ´years ago

Question 46

Does your paint come in gloss for doors and baseboards? View answer

Asked 4 ´years ago

Question 47

Does your paint come in colors? View answer

Asked 4 ´years ago

Question 48

Can i use this in my apartment walls will it keep my animals safe from mold growing inside walls til i can get us out of here and can u paint over this after dried with a colored paint ? View answer

Asked 5 ´years ago

Question 49

Can Caliwel be used over shellac? View answer

Asked 1 ´year ago

Question 50

Is this good as a window and door paint where mold can accumulate with moisture exposure? View answer

Asked 4 ´years ago

SAMPLE - Caliwel Home and Office Mold and Mildew Inhibitor Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic