SAMPLE - AFM SafeCoat, DynoSeal Q&A

Question 1

I have an underground storage tank (kerosene) that had 2 copper pipes which were terminated and covered with cement and some type of epoxy patch. The patch failed after 13+ years (we bought home not knowing about the tank) - had the cement removed enough to see only one of the two copper pipes was crimped - the other one had a sliw frp - that has been crimped and epoxy applied but basement still smells of kerosene. Does your dynaseal product seal cement so we won't smell kerosene? View answer

Asked 1 ´year ago

Question 2

What primer can be used for painting plastic playground equipment? View answer

Asked 1 ´year ago

Question 3

Do you sell an elastomeric paint that will go over dynoseal? View answer

Asked 1 ´year ago

Question 4

Can this be used to waterproof Hempcrete? View answer

Asked 1 ´year ago

Question 5

I'd like to use this on untreated 4x4 pine posts that will have ground contact (maybe a few inches into the ground). The upper parts will be painted with white linseed oil paint. Can I use Safeguard Roof Coat to cover the black color of the Dynoseal at the bottom to help it match the white paint? View answer

Asked 2 ´years ago

Question 6

I bought the product to apply to the interior of a raised garden bed. But in reading the surface prep notes on the can, it says to apply a transitional primer on new wood before the Dynoseal. I haven't seen any mention of this anywhere online. Is the primer really necessary? View answer

Asked 2 ´years ago

Question 7

do you ship to the uk? View answer

Asked 2 ´years ago

Question 8

We had our metal ductwork sealed a month ago and smells like smoke. Is there sealer to get rid of the smell or VOC in ductwork? View answer

Asked 2 ´years ago

Question 9

Is there a fire rating for this product? View answer

Asked 2 ´years ago

Question 10

Can this, or any AFM sealer, be used on vinyl or laminate flooring? View answer

Asked 2 ´years ago

Question 11

Can it work on bathroom tiled? View answer

Asked 2 ´years ago

Question 12

If this is applied on untreated pine boards used to construct raised garden beds, and if 4 coats are used, can exterior wood paint or stain be applied over the top coat of this product, directly; will the paint or stain adhere to this product when it has dried according to the manufacturers' drying instructions? View answer

Asked 2 ´years ago

Question 13

Can This product be used to seal a ICF water cistern ? View answer

Asked 3 ´years ago

Question 14

Can this be applied over expanding foam? View answer

Asked 3 ´years ago

Question 15

Can this be used on the inside of ceramic pots? View answer

Asked 3 ´years ago

Question 16

Would this be appropriate to use on a new subfloor before laying cork waterproof flooring? View answer

Asked 3 ´years ago

Question 17

How much would I need to cover outside of new block basement walls 8'h x 50'l x 32'w? View answer

Asked 3 ´years ago

Question 18

I have a business making and selling outside garden boxes and planters. I am well pleased with the Safecoat Dynoseal and would like to expand the use of it for most of my product. Is there a possibility to get a better price on the gallon and five gallon price and/or free shipping? View answer

Asked 3 ´years ago

Question 19

Would this be ideal painted over our concrete floor before laying hardwood to stop radon gases? View answer

Asked 3 ´years ago

Question 20

Does this product contain and/or has this product been tested for Per- and polyfluoroalkyl substances (PFAS/PFOA)? View answer

Asked 4 ´years ago

Question 21

Is it safe to use DynoSeal for the interior of raised beds that will be used to grow vegetables? Is it to come in contact with plants that will grow food? View answer

Asked 4 ´years ago

Question 22

Could this be used to line the floor of a coop (with bedding on top)? I'm assuming this is safe around animals once properly applied/cured? View answer

Asked 4 ´years ago

Question 23

Hi! i bought a gallon and painted the inside of my planters but read in your instructions it should not be exposed to sun or the elements. Since mt boxes are angled, above soil line there will be 10 inches exposed to sun and rain on all my 10 planters. Should I coat this with something else? Ideally white (and even more ideal if i don't need to coat again but i do want it to last). Thank you! View answer

Asked 4 ´years ago

Question 24

My project doesn't require a whole gallon. How long will an opened/resealed gallon last, to be used on future projects? View answer

Asked 4 ´years ago

Question 25

I don't need a gallon to seal the inside of two half wine barrel planters. Would a sample be enough ? View answer

Asked 4 ´years ago

Question 26

Can the AFM DynoSeal be applied over VNC polywhey exterior stain? View answer

Asked 4 ´years ago

Question 27

If I make raised garden beds from untreated wood and apply this on the inside and the Vermont Natural Coatings PolyWhey on the exterior, will the garden bed be as rot-resistant as if I made it from pressure treated wood? View answer

Asked 4 ´years ago

Question 28

Can this be applied over damp raw concrete? The exterior wall of the under-stair storage in my basement is below grade and has never been treated. It smells mouldy and there is gunk on the concrete (the house is 90 years old). Can I apply this product on the (cleaned) concrete? View answer

Asked 4 ´years ago

Question 29

Does this function as an air barrier? View answer

Asked 4 ´years ago

Question 30

Can you paint over DynoSeal to make it not tacky? View answer

Asked 4 ´years ago

Question 31

Will this product adhere to pvc board ? View answer

Asked 4 ´years ago

Question 32

Once this has been applied, and the exterior of a raised garden bed sealed with a waterproofing sealer, how long is this expected to last? Will it ever need to be reapplied to the same wood? View answer

Asked 4 ´years ago

Question 33

How much is in the sample size? View answer

Asked 4 ´years ago

Question 34

If i get a sample and later i buy the gallon later, could you credit the sample cost towards the purchase of the gallon? View answer

Asked 4 ´years ago

Question 35

Will this work on the inside walls of a raised garden bed frame made of *treated* wood to keep the toxic preservatives in it from leaching into the soil? View answer

Asked 5 ´years ago

Question 36

Can I put this over the basement walls that already been painted with drylock? View answer

Asked 5 ´years ago

Question 37

I live in Minnesota. What does it mean, Freeze/Thaw safe - No.AFM SafeCoat, DynoSeal Are you saying I can't coat the inside of my raised garden bed because it freezes really hard in MN. Think -20F? View answer

Asked 5 ´years ago

Question 38

I'm building a tiny home on a trailer. I want the walls to breathe but still be waterproof beneath the cedar siding. This product seals too strongly for that correct? What would you recommend? I might be driving in the rain at times so water intrusion will be higher than a standard build. View answer

Asked 5 ´years ago

Question 39

Would AFM SafeCoat Dynoseal work for coating planter sticks made of wood? I want the part that sticks into the soil to last longer than it would naturally, as the plant will be watered constantly. View answer

Asked 5 ´years ago

Question 40

Can I use it on bedroom walls over paint ? View answer

Asked 5 ´years ago

Question 41

How do I know how many gallons I need if I intend to apply two coats? My raised garden is 8'x12'with a soil depth of 20". Same question for the exterior, on which Vt Natural Coatings Poly Whey will be used. Thanks. View answer

Asked 5 ´years ago

Question 42

Hello, can this be used on plastic? I want to recycle some plastic planters I found and use them for my organic herbs and vegetables, but I'd like to coat the inside of the pots with this product so that none of the plastic chemicals leach into my soil. Can this product be used for that purpose? Thank you! View answer

Asked 5 ´years ago

Question 43

I have older raised beds that have some beginning signs of rot. Would you recommend this product on older wood to prevent further rot? View answer

Asked 5 ´years ago

Question 44

I have applied the dynoseal to the inside of my raised garden beds. Would it be helpful to apply on the legs, from the ground up a few inches? Thank you View answer

Asked 5 ´years ago

Question 45

What would you use to coat inside of cast iron windmill oil pan with pin hole leaks? View answer

Asked 5 ´years ago

Question 46

Is this stable at high temperatures? I am wanting to seal my plywood floor in a sauna. Floor will be covered with removable floor tiles, so never any actual wear on this product. Temps approaching 150F at the floor level. View answer

Asked 5 ´years ago

Question 47

I am trying to seal a galvanized stock tank for a fish pond would this hold water and be fish safe? View answer

Asked 5 ´years ago

Question 48

Can you paint over it? View answer

Asked 5 ´years ago

Question 49

Can use it inside your house, say for a sunroom? View answer

Asked 5 ´years ago

Question 50

When using to coat exterior foundation walls, it this product compatible with foam insulation? View answer

Asked 5 ´years ago

SAMPLE - AFM SafeCoat, DynoSeal Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic