Question 1

I want to seal odors in interior T1-11 siding and prep for stain. What product should I use? View answer

Asked 4 ´years ago

Question 2

Can this be used with SPC vinyl planks (5mm) with 1mm padding already on them? View answer

Asked 4 ´years ago

Question 3

Cork over wood subfloor.What type of under payment needed? View answer

Asked 4 ´years ago

Question 4

Is this cleaner for Kahrs oak flooring with matte finish? View answer

Asked 4 ´years ago

Question 5

I am building an outdoor dining table that will be under a large canopy on a patio so it won't be exposed to direct rain, snow or sun. The frame is heat-treated pallet lumber and the top is reclaimed lumber with some of the boards affected by dry rot (I'm chiseling out the dry rot).I'd like to use as natural products as possible for the finish. I will likely paint the frame / legs and I'll like to put a clear, satin finish on the top. A couple of specific questions:1. Do you sell or recommend any will filler for filling the larger dry rotted areas? 2. What do you recommend for a clear satin finish for the top? 3. What do you recommend for painting the frame and legs? Thank you very much! View answer

Asked 4 ´years ago

Question 6

Can this be used to adhere countertops? View answer

Asked 4 ´years ago

Question 7

I tried the surface test but the wipe immediately turned yellow when water was added before object was swiped. What does that mean? View answer

Asked 4 ´years ago

Question 8

Could this be used over old carpet adhesive on a wood subfloor prior to new carpet install? We are replacing carpet in a room above a garage in a 1970s home and want to seal off the new carpet from any past or future pollution from the garage. View answer

Asked 4 ´years ago

Question 9

I've a project with several slabs of raw live-edge Saman Acacia wood installed as kitchen counters, vanity top, and as a breakfast nook. The project is in the midwest (high humidity area) and need to ensure the finish is waterproof (around the undermount sink and in a bathroom) and does not require frequent maintenance. While a poly coating would likely be the best waterproofing option, we don't want to cover our raw wood with a plastic-looking coat and prefer to be able to spot refinish. We've had Bioshield #9 recommended to us but I wanted to see if AFM penetrating oil or AFM oil wax would be a better option in terms of waterproofing and longevity for my Saman Acacia? View answer

Asked 4 ´years ago

Question 10

Hi, do they have flame retardants? are the completely VOC free? View answer

Asked 4 ´years ago

Question 11

Does the AFM SafeCoat, Acrylacq seal or encapsulate formaldehyde off gassing from wood furniture? View answer

Asked 4 ´years ago

Question 12

Can the AFM DynoSeal be applied over VNC polywhey exterior stain? View answer

Asked 4 ´years ago

Question 13

Will I be able to install porcelain tile over a concrete floor treated with 500MR? View answer

Asked 4 ´years ago

Question 14

Can a cast iron tub sit on marmoleum? View answer

Asked 4 ´years ago | SAMPLE - Forbo Marmoleum Real - Sheet, Golden Saffron

Question 15

I have unfinished white pine flooring that I want to stain naturally (vinegar and steel wool). Can I apply this over that kind of stain? View answer

Asked 4 ´years ago

Question 16

Does this product contain natural latex? View answer

Asked 4 ´years ago

Question 17

Can sheet linoleum be cut down into tiles? I'd like to do a two-toned checkerboard pattern, but one of the colors I like is only available in sheet. View answer

Asked 4 ´years ago | SAMPLE - Forbo Marmoleum Fresco - Sheet, Marigold

Question 18

Hello, I was advised to use this wax for tadelakt plaster finish - what is the coverage per ounce? View answer

Asked 4 ´years ago

Question 19

What volume does the $9.95 sample come in? View answer

Asked 4 ´years ago

Question 20

is the engineered hardwood available with a finished edge? View answer

Asked 4 ´years ago

Question 21

How much of this exterior stain is in a sample? View answer

Asked 4 ´years ago

Question 22

If you are to go around appliances how would the Bottom draw of my stove open? Would t this new floor block it? View answer

Asked 4 ´years ago

Question 23

can this marmoleum floor be damaged by dog nails and cat claws? View answer

Asked 4 ´years ago

Question 24

Can cork planks be installed over ceramic tile? My grout lines are 1/4" and is all tight and in good condition View answer

Asked 4 ´years ago

Question 25

I have two rooms that I would need carpet for: Including 2 closets what will it cost me to have item # 95849 in a 12x14 room and a 12x20 room? No pad needed. View answer

Asked 4 ´years ago

Question 26

Hello, can I use this product to seal pine plywood walls and cabinets? Looking for something low VOC but still provides moisture protection especially in areas like the bathroom. View answer

Asked 4 ´years ago

Question 27

Do I have to level the subfloor when using sheet linoleum? Or just have a plywood underlayment? View answer

Asked 4 ´years ago | SAMPLE - Forbo Marmoleum Fresco - Sheet, Marigold

Question 28

A bedroom I painted with zero VOC paint still smells after a year and makes me sick (gives me a headache and sinus congestion). it's a sweet odor that my husband can barely smell, but it's very strong to me. I'm very sensitive to chemicals. Will the AFM HardSeal safely seal in any off gassing that is occurring? View answer

Asked 4 ´years ago

Question 29

Can it be used on turned wood bowls? View answer

Asked 4 ´years ago

Question 30

Is this safety certified for wood toys? View answer

Asked 4 ´years ago

Question 31

Use for concrete candles? View answer

Asked 4 ´years ago

Question 32

I am interested in using cork flooring in a dental office is it a appropriate use? View answer

Asked 4 ´years ago

Question 33

I'm looking to seal an old brick wall (interior) to leave it exposed as opposed to covering it with drywall. Would this be the right product for that purpose? View answer

Asked 4 ´years ago

Question 34

It's put in wet correct? No set up time? View answer

Asked 4 ´years ago

Question 35

Good Afternoon, Mr. Goj, I want to paint the interior of a terracotta pot to seal it with the AFM Safecoat DynoSeal (dark color). After decoupaging the exterior of the pot, I want to seal it with the AFM Polyureseal EXT Satin (clear color). Is there a certain temperature range, they should be applied? And a level of humidity? I was going to apply indoors, if it was safe. it's been raining and a little cooler, outdoors. I purchased the samples, and will probably be buying the regular size at some point. I thank you so much for your time. Have a Merry Christmas and a Happy and Blessed New Year. View answer

Asked 4 ´years ago

Question 36

Is the color on the surface or throughout? View answer

Asked 4 ´years ago | Forbo Marmoleum Splash - Sheet

Question 37

Will you cut the slab to my specific dimensions prior to shipping? View answer

Asked 4 ´years ago

Question 38

I want to use this on a 100+ year old desk that smells musty even though it's been cleaned. I've been looking for a mold sealant that is clear and matte, this looks like the best option. There is a light finish already on the desk, will this adhere to it? View answer

Asked 4 ´years ago

Question 39

I'm trying to do a comparison of Amorim Wood Wise vs. LVP. Vinyl (and other flooring) describes the wear layer in mils. Like, 20mil wear layer. How does the HRT Protective Surface compare for depth of that coating (as the wear layer)? View answer

Asked 4 ´years ago

Question 40

Can I use this to seal an epoxy painted floor? View answer

Asked 4 ´years ago

Question 41

Does AFM Polyureseal EXT Satin have to be applied in a well ventilated area? View answer

Asked 4 ´years ago

Question 42

Can I apply this to bamboo utensils after painting them? Will it withstand cooking temperatures? View answer

Asked 4 ´years ago

Question 43

Can this be used in a garage that sometimes gets wet? View answer

Asked 4 ´years ago

Question 44

I will be having my exterior foundation dug out. I'm looking for a good waterproof layer. Is this a good product to use below grade, assuming the cinder blocks are cleaned and allowed to dry? View answer

Asked 4 ´years ago

Question 45

Is Drybarrier an acceptable subfloor for this wood-like cork flooring material? If so, what underlayment would also be recommended? Planning to install in a concrete basement below grade. As of right now, moisture is no problem but we did have water infiltration one time after our sump pump malfunctioned (less than 1/8" water on the floor) so I'm trying to plan for the worst despite it not being the norm. Thank you! View answer

Asked 4 ´years ago

Question 46

Can I use cork tiles on a metal ceiling in my van conversion? If so, what underlayment would I use and how would I fasten it? Is there a bendable cork product that would work better in the vaulted van ceiling? View answer

Asked 4 ´years ago

Question 47

I am not familiar with the terms "two row" and "three row". What is the difference? View answer

Asked 4 ´years ago

Question 48

Will this block/seal drywall and Drywall mud odor? View answer

Asked 4 ´years ago

Question 49

Is it easy to apply with your fingertip on baseboards? I tried this with Safecoat, but it is so gooey, messy, and View answer

Asked 4 ´years ago

Question 50

How well does this perform on stairs? View answer

Asked 4 ´years ago

Browse by Topic