Question 1

Is it safe for cups and mugs? View answer

Asked 6 ´years ago

Question 2

Sustainable Hardwood Flooring from Kahrs Original, Harmony can i use in wet areas? i live on the water and i am concerned about getting it wet. i saw in the cleaning instructions to never use a damp mop View answer

Asked 6 ´years ago

Question 3

An this be refinished? Thank you. View answer

Asked 6 ´years ago

Question 4

Would this product waterproof a wall enough for use as a backsplash? View answer

Asked 6 ´years ago

Question 5

Can thinset be used over concrete that's sealed with the penetrating sealer? Would it interfere with the adhesion? View answer

Asked 6 ´years ago

Question 6

I have a wood planter that is natural wood would this seal the planter from watering? View answer

Asked 6 ´years ago

Question 7

Hi. I got furniture that is made of engineered wood. So I am thinking to use a safecoat safe seal for unfinished porous sides. But I would also like to seal the laminate. it's very thin almost paperless. What product should I use? View answer

Asked 6 ´years ago

Question 8

Can this be put on congas with natural wood or poly that have a prior? View answer

Asked 6 ´years ago

Question 9

Our cabinets have faded due to light and no longer match the new cabinets just installed with bioshield #9. How do I refinish the older cabinets? View answer

Asked 6 ´years ago

Question 10

Would this be safe to use with pets? I need to glue together a post for my cat tree that is cardboard & plastic View answer

Asked 6 ´years ago

Question 11

I am looking for a matte finish. In two places for the AFM Safecoat, it notes that if you want a satin finish, you need to add one base coat of gloss first. But in a third place it notes the same applies for a matte finish. So, which is it? And furthermore, why is that? Seems like a lot of money to spend for a quart of Gloss that I'll barely need and will probably never come close to finishing. Thanks for your response. View answer

Asked 6 ´years ago

Question 12

Do you have a clear coat? View answer

Asked 6 ´years ago

Question 13

What are the ingredients of this non-toxic floor finish? View answer

Asked 6 ´years ago

Question 14

What are the differences between the different models? less splash? easier maintenance? View answer

Asked 6 ´years ago

Question 15

My attic has been insulated with Spray Polyurethane Foam (SPF) and coated with 14 mils of a thermal barrier. Air testing has confirmed that VOCs are within normal limits, but there is a strong odor. Can HardSeal be installed over spray foam? View answer

Asked 6 ´years ago

Question 16

Could this be used on a car? View answer

Asked 6 ´years ago

Question 17

Can it be used on laminate floors? View answer

Asked 6 ´years ago

Question 18

My son ate a small piece of this caulking Should I be concerned about him being poisoned? View answer

Asked 6 ´years ago

Question 19

How well does this bridge gaps? View answer

Asked 6 ´years ago

Question 20

Can this be applied to spray foam? My attic has Spray Polyurethane Foam coated with 14 mils of thermal barrier. The attic has a chemical smell from the insulation. Air testing revealed total VOCs are within normal limits, but it stinks. Will this product help? View answer

Asked 6 ´years ago

Question 21

Can this adhesive be used with store-bought LVT (Luxury Vinyl Tile) faux wood planks? I've already bought the planks, but I'd like to limit the indoor air toxicity in my home by using a non-toxic adhesive for it. Will this product be okay to use for LVT? Thanks. View answer

Asked 6 ´years ago

Question 22

can I use this on a galvanized stock water tank to seal the metal and then be in constant contact with water? Does this product leach any chemicals after it is applied? View answer

Asked 6 ´years ago

Question 23

I need to remove mastic installed on wood and am going to use Blue Bear 500. Will I need to use the 700 degreaser? Is it safe to use on wood? View answer

Asked 6 ´years ago

Question 24

Can this product seal or lacquer plaster columns for outside garden decor? View answer

Asked 6 ´years ago

Question 25

How to clean nova cork ? View answer

Asked 6 ´years ago

Question 26

Can I use this on an interior exposed aggregate floor inside a sauna? We are looking to seal the exposed aggregate with something eco friendly. View answer

Asked 6 ´years ago

Question 27

We are a botanic design company in NYC and have a question regarding the safety of this product for use as a waterproof liner for wooden planters. We use custom-fabricated wooden planters for many of our large projects that must be sealed in order to waterproof the interior for planting and watering in an indoor environment. Can you please let me know if the product would be safe to use in this manner having no adverse affect on the plants' health over time? Fingers crossed...Thanks in advance! View answer

Asked 6 ´years ago

Question 28

Hi! I'm looking to seal some pet-smelly particle board "subfloors" from the 80s. The particle board is pretty long-term smelly, so we wanna make sure whatever we do to seal them works thoroughly. We did BINZ shellac on the subfloor in 2 rooms and it worked great. I'm not looking forward to doing more shellac, but I'll do it if it is what will work best. Would you say this safeseal product could be used *in place of* the shellac on top of the particle board or would safeseal be something to put on top of the shellac? Thanks! View answer

Asked 6 ´years ago

Question 29

Is it safe to use on unfinished HinikiIs it safe to use on unfinished Hinoki floor? View answer

Asked 6 ´years ago

Question 30

I need something to seal plastic with. Might this work, though plastic isn't listed? View answer

Asked 6 ´years ago

Question 31

Is the Marmoleum Click Flooring slippery? View answer

Asked 6 ´years ago

Question 32

Is this safe to use on the inside of a tub? View answer

Asked 6 ´years ago

Question 33

Can it be used on Veneer or manufactured wood kitchen countertop? View answer

Asked 6 ´years ago

Question 34

Can you use this on polymer clay? View answer

Asked 6 ´years ago

Question 35

How do we apply this product? View answer

Asked 6 ´years ago

Question 36

how is this available +and cost? View answer

Asked 6 ´years ago

Question 37

Can this primer be used over previously painted walls? View answer

Asked 6 ´years ago

Question 38

Is this food safe? View answer

Asked 6 ´years ago

Question 39

Can Blissfully Clean be used to clean the inside of an oven? View answer

Asked 6 ´years ago

Question 40

Does one gallon cover 200 sq ft, then? View answer

Asked 6 ´years ago

Question 41

Can this be used as a desktop by itself? View answer

Asked 6 ´years ago

Question 42

We are considering purchasing a home that was newly constructed (9 months ago), however the VOCs are still pungent. The house is tile except for the bedrooms, which are carpet. I have used safe coat for carpet with great success, however I am wondering if there are other products we could use in the house to further decrease the VOCs What would you suggest? View answer

Asked 6 ´years ago

Question 43

I have an oriental wool rug that dates back to 1945 from Japan. It was close to 6 inches thick tight weave. It is now slower to 2 inches thick. One solid color but now has stains from household spills and medication.. Do you think your product could work on this type of carpet? The weave is still in great shape no wear spots. View answer

Asked 6 ´years ago

Question 44

do you have to buff this product when applying it to a cork floor? View answer

Asked 6 ´years ago

Question 45

Can I use this on glass bottles to attach beads? View answer

Asked 6 ´years ago

Question 46

I am considering placing an order for 4 boxes on MCT-793. What is the difference between the MCT and Modular tiles, other than the size of the tile? What is the product warranty for these tiles? View answer

Asked 6 ´years ago

Question 47

I'd like to redo the surface of my dining table because the paint is coming off. What product would I use if I sand the surface and then want an easily wipeable, non-toxic surface for toddlers to eat off of? View answer

Asked 6 ´years ago

Question 48

Can I apply the Vermont Natural Coatings stain over AFM Safecoat DynoSeal? Or stain it first with Vermont, and then DynoSeal? it's for a raised garden and I want to stain all outside boards but also coat the inside. What is the best temperature to apply both products? View answer

Asked 6 ´years ago

Question 49

I bought clear ChemLink general purpose sealant for my bathroom to caulk between the wall and the bathtub, but I am wondering if it is really translucent because I don't want to see the crack between tile wall and bathtub. is there a version of this that is white? I want something that will last, not mold/mildew, and not smell (be as least toxic as possible). View answer

Asked 6 ´years ago

Question 50

I am extremely chemical sensitive so I am unable to use any stains or finishes with VOCs. I need to redo my hardwood floors as well as trim. Your Monocoat sounds like a godsend for me. My problem is, my wife likes at least a semi-gloss shine. Is there any way to use the Monocoat and the Universal Maintenance Oil to get a higher shine? I told her about the satin but she doesn't think that will be enough. View answer

Asked 6 ´years ago

Browse by Topic