Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
We recommend a sample before you order!
We provide fast, free shipping on samples.
Vermont Natural Coatings, Exterior, Penetrating Water Proofer
Vermont Natural Coatings, Exterior, Penetrating Water Proofer
This product may not perform properly if applied below the required temperature. Please check installation instructions on our website.
Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 800.405.0222
Vermont Natural Coatings (VNC) Penetrating Water Proofer is a non-toxic exterior sealer for raw wood: wood siding, fences, outdoor furniture, and most other outdoor wood surfaces. It may be applied to pressure-treated wood after a minimum of 6 months. It is not suitable on wood that is submerged, sealed, painted, or below grade.
Penetrating Water Proofer is non-toxic, zero VOC and safe for people, pets and the environment. It has ultra-low odor and contains no biocides, fungicides or anti-microbial agents.
Penetrating Water Proofer is infused with juniper, which is nature’s strongest natural wood preservative. It stabilizes and seals wood from the inside which controls moisture absorption and extends the life of the wood by reducing mold, mildew and decay. Penetrating Water Proofer dries clear and leaves no topcoat, allowing the wood's color to age naturally. (If you prefer a color, please consider VNC Exterior Penetrating Stain.)
NOTE: This is a penetrating water proofer. That means it works by soaking into the wood. If the wood has been previously sealed or painted, it will not soak in and will not perform as designed. Once treated, no other sealers or paint can be applied unless worn off or sanded off.
NOTE: A note on applications on horizontal surfaces such as decks. This product is clear and offers little protection from direct sun. While your deck will be waterproof, it will continue to turn grey and age like raw wood. On southern and western orientations, it will grey in 2-3 years. On northern and eastern expect 3-4 or longer. To protect against UV rays, consider a pigmented Vermont Natural Coatings PolyWhey Exterior Stain instead.
Apply with brush, paint pad, or spray. Two coats are recommended. Apply the second coat when the first coat is still damp or before it dries. Under normal conditions treated wood will be fully cured in 48 hours. One gallon will cover approximately 300 sq. ft. depending on porosity of wood.
For those with beautiful new or old woodwork outside your home, Vermont's Penetrating Water Proofer is an ideal choice for a simple, clear sealer without the smell of solvents. It blocks moisture and prevents mold, mildew and decay. Because it has no biocides, fungicides or pigments to protect it, it may need to be re-applied every two years if it's in the direct sun; it will last much longer if applied on the north or east side of your home.
Features & benefits
Easy-to-use — paint pad, brush or spray; soap and water cleanup
Stabilizes wood — penetrates wood and seals from the inside with no topcoat
Water-proof barrier — controls moisture and reduces mold, mildew and decay
Versatile — for use outdoors on new, pressure treated or weathered wood surfaces such as exterior furniture, siding, railings, etc.
Very low-odor — non-offensive to installer and occupant
Non-toxic — zero VOC, no solvents, dyes, biocides or fungicides
Dries quickly — in less than an hour and cures completely in 48 hours
Coverage — up to 300 sq/ft per gallon (up to 75 sq/ft per quart) depending upon porosity of wood
Alert: Do not freeze. Do not thin.
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: . We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Coverage (1 Coat)
Recommended # of Coats
2-3 coats until a sheen appears on surface - depends on porosity. 2-3 coats will cover an average of 50-100 SF per Quart, 200-400 SF/gallon, 1000-2000 SF/5 gallon
VNC: Apply next coat after previous coat has been absorbed. Wet on Damp. Do not let dry between coats.
Under 2 Hours after second coat
Square Feet / Box
Thickness or Height
Veneer Cut Thickness
Boxes / Pallet
Square Feet / Pallet
Boards / Box
Pieces / Box
Weight / Box
Interior or Exterior
Use On Material
Penetrating Water Proofer can be used on all properly prepared, unsealed
wood surfaces. Use on railing, shake roofs, siding, fencing, and outdoor furniture. For pressure treated wood allow 3-6 months before application.
Not suitable for subterranean or submerged wood.
Can not be used on already sealed, painted wood. Once the product has been applied, in can not be overcoated with paint or additional sealers.
Materials & Resources/4 Recycled Content: 1 to 2 points, Materials & Resources/5 Regional Materials: 1 to 2 points, Materials & Resources/6 Rapidly Renewable Materials: 1 point
LEED® Regional Materials Zip Code
GreenGuard Gold, Red List Free
Country of Manufacture
Use With These Products
Number of Colors
Critical Radiant Flux
Face or Pile Weight
Pile Height (High)
Pile Height (Low)
Resistance to Insect Pests
Stitches Per Inch
Surface Texture, Construction, Style
Tufts per Sq. In.
Tufts / Sq In
Bundles per Pallet
Bundles per Square 6" Exposure
Bundles per Square 7" Exposure
Bundles per Square 7-1/2" Exposure
Bundles per Square 8" Exposure
Pounds per Bundle
Pounds per Pallet
Pounds per Roll
Pounds per Square
Pounds per Square 6" Exposure
Pounds per Square 7" Exposure
Pounds per Square 7-1/2" Exposure
Pounds per Square 8" Exposure
Lin Feet per Bundle
Lin Feet per Pallet
Rolls per Pallet
Squares per Roll
Tiles per bundle
Tiles per Lin Foot
Infused with Juniper, Natural Whey Protein (By-Product of Cheese Making Process)
brush, roller, spray, T-Bar Applicator
Application Temperature Range
APPLICATION: NOTE: Apply when no rain is expected for 24 hours.
1) Stir well prior to use.
2) Apply with a brush and/or spray equipment (if spraying use a 17-19 tip and medium to coarse spray pattern) without thinning to a properly prepared surface. Brush in any puddles of product on the surface.
3) Apply TWO coats. The second coat MUST be applied before the first coat dries. If the first coat fully dries it will not allow the second coat to penetrate. No sanding is required between coats.
4) Coat all wood surfaces and end-grain and apply in temperatures between 45° - 100°F and relative humidity of 40%-60%. Coating all surfaces increases the stability of the wood. High humidity or low temperature may lengthen dry time.
Surface or Product Preparation
If new wood, be certain surface is thoroughly cleaned before applying. For pressure washing, do not exceed 1200 psi and use a wide-spray nozzle. Allow the wood to dry completely (4-5 dry days after pressure washing). For previously coated material, be sure all loose finish is removed, then clean thoroughly. Test to ensure the wood is able to accept finish by checking if water beads on surface or soaks into the wood. If the water soaks in, the wood is able to accept Penetrating Water Proofer.
Appearance When Dry
Cleans Up With
Soap & Water
Store in cool dry place out of sunlight
Recycling or Disposal
Biodegradable, Dispose of excess product in accordance with all local state and federal regulations
Finish Contains Aluminum Oxide?
Floor Item Type
Janka Hardness Rating
Number of Plys
Range of Resistance
Risk in Dry Climates
Shade (1 Light) - (7 Dark)
Strips / Plank
Surface Treatment Color
Touch Up Kit
Can be indoor?
Can be outdoor?
Max Gallons Per Minute
Max BTU's / Hour
- BTU's / Hour
Multi Control Capabilities
Temperature Range (with remote)
Color Rendering Index (CRI)
Questions & Answers
Green Building Supplies:
Area of room (sq ft):.
[Error processing dynamic tag include('/stavano.ssp') : include not permitted in this context]