Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Bioshield Herbal Oil is a cold pressed linseed oil. It penetrates deeply and creates an elastic, breathable and water resistant finish that enhances the natural beauty of any wood.
It's a food grade sealer for use on food surfaces such as butcher blocks, wooden counter tops, salad bowls, wooden utensils and cutting boards. Herbal Oil is also appropriate for kids' toys, baby cribs, general furniture, etc. there's no need for other sealers on top if it's maintained regularly.
If you need a food grade product to use in the kitchen or to seal wood furniture used by young kids, this is it. Made with organic oils and non-toxic ingredients.
Features & benefits
Durable – holds up to normal use; is water and stain resistant
All natural ingredients – made from the highest grade organically grown flax seed, lead-free dryers and essential oils
Non-toxic, low odor – free of petroleum distillates, mineral spirits and lead
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: New Mexico. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
brush, buffing pad - white, cotton cloth - lint free
Application Temperature Range
Warmer than 55°F
Application Instructions
Allow-penetrate for approximately 25 minutes, then wipe off any exess with a soft, absorbent, lint-free cotton cloth - lint free. Repeat process 24 hours later.
Surface or Product Preperation
Surface should be dry, non-absorbent, clean, and free of contaminants such as mildew, oil, grease. Very resinous woods such as teak should be cleaned with BioShield Citrus Thinner, and other exotic woods should be wiped with an alcohol thinner (ethanol). Extremely dry and other highly-absorbent woods should first be treated with Bioshield Penetrating Sealer. For less absorbent surfaces and hardwoods in good condition, use Bioshield Primer Oil. Thin with no more than 1 part solvent to 4 parts of oil.
Recommended # of Coats
1
Re-coat After
as needed
Drying Time
24 hours
Appearance When Dry
matte
Cleans Up With
Bioshield Citrus Thinner
Storage
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
Samples
Shipping