Order as many floor samples as you like and we'll ship all samples to you for free! You may then return them, within six months, and receive a refund for all returned samples. Please note: We do not reimburse for return shipping costs.
Silacote Concrete and Masonry Paint is designed for use on inorganic cementitious substrates, and can be used in both interior and exterior applications. It has many beneficial characteristics such as ; water vapor permeability, incombustibility, prevents mold, mildew or algae, radiant heat barrier, color fast, zero VOC and environmentally safe.
This product penetrates into the inorganic substrate of masonry and then petrifies, forming a micro-crystalline structure that resists moisture and helps to reflect heat. Extremely long-lasting and durable, Silacote Concrete and Masonry Paint is not a topical finish, therefore it will not crack and peel off the structure. It has been used on hotels and churches for more than a hundred years and holds up extremely well.
Silacote must be applied over a masonry substrate such as concrete, stucco, brick and has no paint, sealers, oil or wax on the surface. It must be used with a Silacote Primer and mixed 50/50. It comes in a smooth or textured finish and can be tinted to more than 100 colors pastel colors. It can be applied with a brush, roller or sprayed. Only one prime coat and one top coat are needed.
TIP: Box your paint. Boxing paint means combining all the paint of one color into a larger container BEFORE painting. This blends any inconsistencies in color, especially on large surfaces where the slightest variation from one can to another could be visible. If you think you may not have enough paint to finish one wall, don't begin until you receive more paint. Box the new gallon with the original and then finish the job.
If you're building with plaster, stucco, brick or concrete, use this and you'll never have to paint again. It's expensive but not overpriced because it won't wear off or need re-application down the road. And, you will never have mold problems.
Features & benefits
Easy-to-use – apply with standard brush, roller or suitable spray gun
Versatile – use on interior or exterior new concrete, stucco, lime plaster, cement plaster, cement board, sand-lime brick or gypsum wall board; not suitable for floors
Long-lasting – will not fade, crack or peel
Fully tintable – 252 colors (call for swatch book)
Two finish options – smooth matte or textured finish
Fast-curing – re-coatable after 12 hours
Warranted – 10-year warranty
Prevents fungus, algae and mold – high pH composition ensures a hygienic paint layer
Non-toxic, odorless – contains no harmful solvents, preservatives, dryers or other irritants
Eco-friendly – zero VOC
State Nexus Fee may apply A state nexus fee will be applied to this item if drop shipped to the following states: California. We're sorry for the inconvenience. Click here to read more about the state nexus fee.
Residential Finish Wear
Commercial Finish Wear
Forest Stewardship Council (FSC)
FSC Chain-of-Custody #
LEED® Regional Materials Zip Code
Meets or exceeds California Air Resources Board (CARB) requirements, Meets or exceeds Californial Proposition 65 requirements
Surface should be clean, dry, oil free, primed surface
Recommended # of Coats
Appearance When Dry
depends on type and color of paint
Cleans Up With
Water, neutral cleaners
Store in cool dry place out of sunlight
Recycling or Disposal
Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials