|
|
Bioshield, Primer Oil
| Colors: | |  |
Non-toxic penetrating-oil primer and sealer
Primer oils are designed to penetrate deeply and provide a foundation for more viscous oils and waxes. Unlike typical penetrating oils, Bioshield Primer Oil contains no solvents to thin them and no dryers to speed up the natural process of curing.
Bioshield Primer Oil is a wood primer and sealer that creates an elastic, breathable, wood-grain enhancing surface. It has a mild odor, applies easily, is economical and has superior water-resistant qualities. It's similar to Bioshield Herbal Oil, but is not food-grade.
Bioshield Primer Oil is for all absorbent surfaces such as most unsealed, new or weathered wood, and especially hardwood. It also works well as a sealer for slate, stone and concrete.
NOTE: This Primer Oil must be followed with other oils for the finish coat. After priming, finish with Bioshield Resin Floor Finish, Bioshield Hard Oil or Bioshield Floor and Furniture Hardwax.
Why we like it
This is a very thin primer-type oil that penetrates deeply into the grain of almost any dry wood. Oils from other manufacturers usually sit on the surface and don't penetrate as well as this product.
Features & benefits
- Deep penetration — excellent coverage; seals most kiln-dried wood as well as cork, masonry, stone and brick
- All-natural ingredients — linseed oil, iospar, orange peel oil, lead-free dryers and essential oils.
- Non-toxic, odor-free — free of petroleum distillates, lead and other hazardous materials
- Safe — for everyone, including the chemically sensitive. learn how to test a non-toxic product for tolerance
- Easy-to-apply — use pad or brush
Alert:
This item description was written by Joel Hirshberg Specs
| Basics |
|---|
| Interior or Exterior | Exterior, Interior |
| Use On Material | Block, Hardwood: Flooring, Wood: Decks, Masonry, Brick, Stone: Unsealed, Cork: Flooring, Doors, Wood: New, Concrete, surfaces - porous, Masonry: Unsealed, Flooring, Wood: Resanded, Wood: Unsealed, Stucco, Tile: Unglazed, Stone, Stone: Porous, Masonry: Porous, Windows |
| Use On | Lays the foundation for and enhances the results of Bioshield Resin Floor Finish and Bioshield Furniture Hardwax |
| Location | All Rooms |
| Eco-replacement for | Sealers |
| Chemically-sensitive safe | Yes learn how to test a non-toxic product for tolerance |
| Test before use | Yes, test on inconspicuous area |
| Dimensions |
|---|
| Coverage | 3.4-Ounce = 1-15 SF
25-Ounce = 75-113 SF
85-Ounce = 250-375 SF |
| Square Feet / Box | Square Feet |
| Boxes / Pallet | Boxes |
| Square Feet / Pallet | Square Feet |
| Boards / Box | Boards |
| Pieces / Box | Pieces |
| Weight / Box | Pounds |
| Thickness or Height | " |
| Thickness | mm |
| Veneer Cut Thickness | |
| Length | " |
| Length | mm |
| Width | " |
| Width | mm |
| Features |
|---|
| Minimum Order | |
| Old Name | |
| Origin | |
| Recycled Content | |
| Shelf Life | |
| Use With These Prodcuts | Bioshield Resin Floor Finish | Bioshield Furniture Hardwax |
| Number of Colors | Colors |
| Carpet Pattern | |
| Coordinating Border | |
| Critical Radiant Flux | |
| Extractable Matter | |
| Face or Pile Weight | |
| Fiber | |
| General Flammability | |
| Surface Flammability | |
| GSA Classification | |
| Line | |
| Machine Guage | |
| Moth Resistance | |
| Pattern Repeat | |
| Pile Height (High) | |
| Pile Height (Low) | |
| Primary Backing | |
| Resistance to Insect Pests | |
| Roll Length | ' |
| Secondary Backing | |
| Smoke Density | |
| Static | |
| Stitches Per Inch | |
| Surface Texture, Construction, Style | |
| Total Height | |
| Total Weight | |
| Traffic Rating | |
| Tufts per Sq. In. | Tufts / Sq In |
| Yarn Construction | |
| Bundles per Pallet | Bundles |
| Bundles per Square 6" Exposure | Bundles |
| Bundles per Square 7" Exposure | Bundles |
| Bundles per Square 7-1/2" Exposure | Bundles |
| Bundles per Square 8" Exposure | Bundles |
| Pounds per Bundle | Pounds |
| Pounds per Pallet | Pounds |
| Pounds per Roll | Pounds |
| Pounds per Square | Pounds |
| Pounds per Square 6" Exposure | Pounds |
| Pounds per Square 7" Exposure | Pounds |
| Pounds per Square 7-1/2" Exposure | Pounds |
| Pounds per Square 8" Exposure | Pounds |
| Lin Feet per Bundle | Lin Feet |
| Lin Feet per Pallet | Lin Feet |
| Rolls per Pallet | Rolls |
| Squares per Roll | Squares |
| Tiles per bundle | Tiles |
| Tiles per Lin Foot | Tiles |
| Finish Type | |
| Base | Oil-based |
| Ingredients | essential oils, oil - linseed, isopar, oil - orange peel (d-limonene), lead-free dryers (zircon octoat, cobalt octoat) |
| VOC Content | Zero VOC Grams/Liter |
| Use On Material - Condition | Block, Hardwood: Flooring, Wood: Decks, Masonry, Brick, Stone: Unsealed, Cork: Flooring, Doors, Wood: New, Concrete, surfaces - porous, Masonry: Unsealed, Flooring, Wood: Resanded, Wood: Unsealed, Stucco, Tile: Unglazed, Stone, Stone: Porous, Masonry: Porous, Windows |
| Use On Instructions | Lays the foundation for and enhances the results of Bioshield Resin Floor Finish and Bioshield Furniture Hardwax |
| Application Method | cotton cloth - lint free, paint brush, paint pad |
| Application Temperature Range | warmer than 55 ° f |
| Application Instructions | Allow-penetrate for approximately 25 minutes, then wipe off any exess with a soft, absorbent, lint-free cotton cloth - lint free. Repeat process 24 hours later. apply with paint pad or brush, then use cotton cloth - lint free--oil also can be used for spraying or dipping. Do NOT thin. |
| Surface or Product Preperation | Surface should be sound, dust free, and free of contaminants such as mildew, oil, and grease. The maximum moisture content for softwoods should not exceed 18 percent, and hardwoods should not exceed 12 percent moisture. Very resinous woods such as teak should be cleaned with BioShield Citrus Thinner, and other exotic woods should be wiped with an alcohol thinner (ethanol) |
| Recommended # of Coats | 1 |
| Re-coat After | as needed |
| Drying Time | 24 hours |
| Appearance When Dry | slightly amber |
| Cleans Up With | Bioshield Citrus Thinner |
| Storage | Store in cool dry place out of sunlight |
| Recycling or Disposal | dispose of excess product in accordance with all local, state and federal regulations., disposal of oil can be by painting or rolling out oil onto sheets of carboard and dried outdoors. or fill the remains of a container with absorbant materials such as sand or cat litter. |
| Adhesive | |
| Bamboo Construction | |
| Bathroom Installation | |
| Color Change | |
| Construction | |
| Construction Description | |
| Durability | |
| Edge | |
| Finish | |
| Finish Sheen | |
| Floor Item Type | |
| Floor Pattern | |
| Floor Type | |
| Grade Installation | |
| Grading | |
| Installation | |
| Janka Hardness Rating | |
| Joint System | |
| Knots | |
| Material | |
| Number of Plys | -Plys |
| Composition | |
| Radiant Heat | |
| Range of Resistance | |
| Risk in Dry Climates | |
| Style | |
| Shade (1 Light) - (7 Dark) | |
| Strips / Plank | -Strips/Plank |
| Surface Texture | |
| Surface Treatment | |
| Surface Treatment Color | |
| Tile Application | |
| Touch Up Kit | |
| Can be indoor? | |
| Can be outdoor? | |
| Direct Vent? | |
| Easy-Linkable? | |
| Energy Factor | |
| Max Gallons Per Minute | - GPM |
| Max BTU's / Hour | - BTU's / Hour |
| Multi Control Capabilities | |
| Temperature Range (with remote) | |
| Warranty |
|---|
| Warranties | |
| Residential Finish Wear | |
| Residential Structural | |
| Commercial Finish Wear | |
| Commercial Structural | |
| Certifications |
|---|
| Forest Stewardship Council (FSC) | |
| FSC Content | |
| FSC Chain-of-Custody # | |
| LEED® Qualifications | |
| LEED® Regional Materials Zip Code | |
| Certifications | |
Accessories
Bioshield, Primer Oil
| | Items | Options | Price |
|
Deeply penetrating oil primer and sealer for hard and soft woods |
|
|
|
|
|
Bioshield, Primer Oil
Item #2032
Was | |
Discount | |
Lifetime Phone Support | FREE |
Shipping | FREE* | |
|
|
|
|
Calculate
Shipping
